Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 225 for “"flat plates"”.

  1. Assessment of RANS Turbulence Models for Hypersonic Flat Plates

    … (SA) models on a group of hypersonic flat plate cases from a recent direct numerical simulation (DNS) database. Quantities of interest examined include velocity, temperature, turbulent kinetic energy, modeled turbulent kinetic energy budget terms, eddy viscosity, Reynolds stresses, …

    vt Repository record for Assessment of RANS Turbulence Models for Hypersonic Flat Plates (opens in a new tab)

  2. Aerodynamics of finite-span inclined flat plates in ground proximity

    … and aerodynamic loading on finite-span inclined flat plates in close ground proximity subject to both steady and unsteady flow conditions are experimentally investigated. The supporting data consists of direct force measurements, surface flow visualization, and particle image velocimetry. In the …

    waterloo Repository record for Aerodynamics of finite-span inclined flat plates in ground proximity (opens in a new tab)

  3. Heat Transfer Characterization in Jet Flames Impinging on Flat Plates

    … of heat transfer coefficient at the surface of a flat Aluminium plate being impinged by a turbulent flame jet. Heat transfer coefficient distribution at the surface is computed from the measured heat flux and temperature data using a reference method and a slope method. The heat transfer …

    vt Repository record for Heat Transfer Characterization in Jet Flames Impinging on Flat Plates (opens in a new tab)

  4. Punching shear of reinforced concrete flat plates : behavior and design considerations

    The use of flat plates (i.e., slabs without capitals, drop panels, or supporting beams) in reinforced concrete (RC) building construction has become widespread throughout much of the world. In comparison to other slab types, RC flat plates are often more efficient from a construction standpoint due …

    texas Repository record for Punching shear of reinforced concrete flat plates : behavior and design considerations (opens in a new tab)

  5. The Transient Response of Flat Plates Using the Finite Element Method

    In the finite element method a discrete system is derived to approximate a continuum. A discretizing method is justified for this investigation by comparing the dynamic analysis of a discrete system with that of a plate continuum using the variational calculus. The transient response of the former …

    aston Repository record for The Transient Response of Flat Plates Using the Finite Element Method (opens in a new tab) Download PDF for The Transient Response of Flat Plates Using the Finite Element Method (opens in a new tab)

  6. Evaluation of post punching capacity of flat plates under progressive collapse

    … investigates the post-punching resistance of flat-plate buildings without continuous bottom reinforcement. An overview on both the historical development of the analytical theories of punching mechanisms and post punching mechanisms as well as the evaluation of post punching capacity of …

    missouri Repository record for Evaluation of post punching capacity of flat plates under progressive collapse (opens in a new tab)

  7. Simulation of Flow Over Flat Plates for PV Wind Loads Assessment

    … incompressible flow around normal and inclined flat plates relative to the oncoming flow at a Reynolds number of 1200 using Reynolds Averaged Navier-Stokes (RANS) equations. The angled plates simulate PV modules in a variety of different environments. Three different turbulence models were used …

    calgary Repository record for Simulation of Flow Over Flat Plates for PV Wind Loads Assessment (opens in a new tab)

  8. Punching shear strength of edge column connections of rectangular flat plates

    Edge column slab connections of continuous flat plate structures, under combined shear and moment transfer, can be susceptible to failure by punching shear. A 2 bay by 2 bay, rectangular flat plate, panel aspect ratio 2:1, was fabricated and loaded to failure under a simulated uniformly distributed …

    ottawa-retro Repository record for Punching shear strength of edge column connections of rectangular flat plates (opens in a new tab)

  9. AN EXPERIMENTAL STUDY OF THE FLOW AROUND SURFACE-MOUNTED RECTANGULAR FLAT PLATES

    … finite-height three-dimensional rectangular flat plate. Four different flat plates were used in the experiments, with aspect ratios of AR = 0.5, 1, 2 and 3. For each aspect ratio, the incidence angle α was varied from α = 0° to 90° in increments as low as 5°. The experiments were conducted in …

    sask Repository record for AN EXPERIMENTAL STUDY OF THE FLOW AROUND SURFACE-MOUNTED RECTANGULAR FLAT PLATES (opens in a new tab)

  10. Wind loading and aeroelastic response of flat plates: application to solar trackers

    Juan Zaracho investigated wind loads and aeroelastic behaviour of solar trackers using wind tunnel tests on scaled models. Fluctuating wind loads and critical wind speeds for torsional galloping and divergence were determined for various tilt angles and wind directions. The influence of tracker …

    jamescook Download PDF for Wind loading and aeroelastic response of flat plates: application to solar trackers (opens in a new tab)

  11. Long-term deflections analysis of reinforced concrete flat plates under construction loads.

    … investigation of the long-term deflections for flat plates, of typical dimensions, was effected using a finite element analysis program for several possible load histories. The study indicated that the present span thickness recommendations of ACI 318 and CSA A23.3 would not necessarily prevent …

    ottawa-retro Repository record for Long-term deflections analysis of reinforced concrete flat plates under construction loads. (opens in a new tab)

Page 1 of 12