Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"flat punch"”.
-
Plastic limit analysis of a coulomb material loaded by a flat punch
The critical load required for a rigid, flat punch to cause failure of a material obeying the linear Coulomb-Mohr yield criterion in plane strain is bracketed by upper and lower bound values determined by plastic limit analysis. These values are a function of the cohesion and angle of internal …
-
Measuring Polydimethylsiloxane (PDMS) Mechanical Properties Using Flat Punch Nanoindentation Focusing on Obtaining Full Contact
… version of the nanoindentation test using a flat punch tip. The method is proposed in Chapter 3 and it is used to calculate the elastic modulus of different PDMS samples. The samples tested were both produced specifically for this research and available in the laboratory’s storage. They all …
-
Polydimethylsiloxane Mechanical Properties Measured by Macroscopic Compression and Nanoindentation Techniques
… method was applied for the nanoindentation flat punch test to develop full contact. In chapter 2, an easy instrument setup for macroscopic compression test is described. A series of PDMS samples with different base/agent ratios were tested using the macroscopic compression method. The …
-
The use of plasticity theory in predicting the deformational behavior of ice and sand-ice systems
… rate in the triaxial test at 25 psi/sec. Flat punch tests were also performed at both .12 and 1. in/min. Results of theoretical calculations for wedge indentation of ice and sand-ice samples based on results of triaxial tests are compared with experimental results. All experimental results …
-
An experimental investigation of indexed indentation of rock
… is made of the idealized drilling problem of a flat punch loading a horizontal rock surface near a previous crater. Tests are run on a limestone to determine the force required to form a chip and the chip shape as functions of the confining pressure, the inclination of the free surface from the …
-
Dynamic mechanical characterization of very soft polymeric materials using nanoindentation techniques
… polydimethylsiloxane, using both Berkovich and Flat punch geometries, are compared. Indentation results are compared to the results of dynamic mechanical analysis testing on the same materials.</p>
-
Improved understanding of metal cutting based on slip-line field theory
… by comparing the machining process with flat punch indentation. Using finite element simulations of flat punch indentation, it is shown that for confinement ratios above the critical value, the field is that given by Prandtl for flat punch indentation. But for confinement ratios less than …
-
Mechanisms and Implications of Kink-Banding in Layered Materials
… of single-crystal specimens with a rigid punch along predetermined directions, with and without lateral deformation constraint. Although mechanical behavior of Micas has been well studied, the effect of isomorphic substitution on kink-banding in this class of material is not well …
-
Sub-Micron Indium Pillar Fabrications
… later be compressed by a nano-indenter using a flat punch. Compressive stress, strain, and stiffness of the pillars will be measured to verify if the indium mechanical behavior deviates from the bulk in the absence of strong strain gradient.
-
Mechanical Behaviour of Single Crystal, Pollycrystalline and Nanocrystalline Metallic Nanopillars Under Compression
… under a nanoindenter outfitted with a flat punch diamond tip. The strain rate sensitivities and flow stresses were analyzed for each material. Single crystal tin and indium nanopillars showed size-dependent flow stresses where smaller diameter pillars exhibit greater attained strengths. …
-
Characterization and application of an additively manufactured photopolymer: From nanoindentation to a novel mechanical attachment for scalable structures
… A finite element simulation validated the flat-punch (FP) analytical solution against the flat-end conical punch (FEC) geometry, confirming negligible error at experimental depths. Multiple NI procedures were compared across three probe geometries (Berkovich, FEC, and 60° conical) in the …
-
Mechanics and Deformation of Polymer Kirigami Structures
… in-situ scanning electron microscopy (SEM) flat punch compression. Computational modeling was conducted to support the experimental findings and to investigate and understand the deformation and fracture of the structures. Our findings revealed that the load-bearing capacity, resilience, and …
-
A Finite Element Study of the Contact Stiffness of Homogenous Materials and Thin Films
… properties of the film and the substrate for flat cylindrical punch indentation is derived. To apply this to conical indentation, it is shown that an effective film thickness should be used in the new relation to account for the geometry difference between a conical indenter and a flat punch. …
-
An Experimental Investigation of the Elastic and Viscoelastic Properties of Small
… further develop experimental methodologies using flat punch nanoindentation to measure the constitutive behavior of viscoelastic solids in the frequency and time domain. The reference material used in this investigation is highly plasticized polyvinylchloride (PVC) with a glass transition …
-
Synthesis and indentation of boride and carbide coated carbon nanotube composite microstructures
… and strength. Nanoindentation tests using a flat punch were performed on the CNT pillars to measure their Young’s modulus and compressive strength. By varying the CNT coating thickness, a trend develops for the Young’s modulus as a function of coating thickness for the CNT pillars where E ~ …
-
Biomechanical Properties of Live Rat Brain Following Traumatic Brain Injury
… contusion with intact dura using a 4-mm-diameter flat punch indenter to a maximum depth of 1.2 mm at loading. Loading rates did not exceed 0.34 N/min and 1.2 mm/min. In order to obtain force displacement data, we studied the elastic response of the traumatized brain tissue and the deformation …
-
A quantitative analysis of multi-scale response of CMP pad: quasi-static and dynamic characterization of dry and wet pad
… with a conical tip of 1[mu]m radius and a flat-punch of 30[mu]m radius. The wet pad measurements showed degradation of the pad stiffness, which is attributed to water absorption within a micron of pad cell membrane. This reduction of stiffness is not significant because the pad material is …
-
Modelling and simulations of hydrogels with coupled solvent diffusion and large deformation
… interests are considered: constrained swelling, flat-punch indentation, and fracture of hydrogels. Constrained swelling may lead to instantaneous surface instability. Indentation relaxation of hydrogels is simulated beyond the linear regime under plane strain conditions, and is compared with two …
-
A Study of Indentation Creep Using the Finite Element Method
… only blunt cones approaching the geometry of a flat punch indenter have been considered for the most part in previous works. In this study, the problem of finite strain – finite deformation is addressed for conical indentation. Various half-included cone angles of the indenter are considered to …
-
Yielding Behaviour of Electron Beam Lithography and Focused Ion Beam Made Nanocrystalline Micro/Nanopillars
… nano-indenter equipped with a 10 μm flat punch at constant rates from 0.0015 to 0.03 mN/s on EBL grown pillars, and 0.0015 and 0.015 mN/s on FIB-milled pillars. The measured Young’s modulus ranged from 55 to 350 GPa for all pillars, agreeing with values in the literature. EBL grown …
Page 1 of 2