Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2070 for “"flat roof"”.
-
Wind pressures on flat roof edges and corners of large low buildings
… in wind codes and standards for the design of roof zones of flat-roofed low-rise buildings with large dimensions. Current wind codes and standards have load provisions dealing with low buildings of common configurations. Large buildings, say 100 m long, have not been considered when these …
-
Full-scale study of wind loads on a flat roof with parapets
… carried out to examine the effect of parapets on roof wind loading. Most of these studies have been carried out in the wind tunnel and rarely has an effort been made to study this effect in full-scale. A systematic and extensive research has been carried out in the present study to evaluate the …
-
FROM FLAT ROOF TO ROOF GARDEN : COMPARING FIVE DIFFERENT APPROACHES ON ROOFTOP DESIGN
… addresses categories of design treatments for a rooftop at The Sylvester Broome Empower Village, located in Flint, Michigan. Five design treatments: flat roof, self-design roof, extensive green roof, semi-intensive green roof, and intensive green roof, were evaluated by 36 variables chosen by the …
-
Wind Loads On Non-Rectangular Flat-Roof Buildings: Design Provisions And Application Of Machine Learning
… This study investigates wind pressures on roofs and walls of non-curved and non-rectangular buildings with four shapes L, U, T, and X with different plan dimensions and heights. This study aims to provide design guidelines for cladding and components of the envelope of non-rectangular …
-
Comparative geomechanical investigation of empirical, analytical, and numerical methods utilized in designing flat-roof excavations in discontinuous and laminated rockmasses
… simplifications often employed in the design of flat-roof excavations: assuming that the overburden has no self-supporting capacity, and representing discontinuous systems as continua. To that end, this research utilizes the explicit discrete element method (DEM) to identify and account for the …
-
Evaluating Green and Blue Roof Opportunities in Canadian Cities
Flat roof surfaces represent a significant proportion of urban areas and perform a variety of functions for buildings, with a corresponding variety of impacts on the urban environment and its infrastructure. One of the most important flat roof functions is the collection and discharge of rainwater, …
-
Thermal Properties of Green Roofs in Cold Climates
Green roofs have, in the past 15 years or so, gained increasing acceptance as a means of replacing or offsetting the lost of green space due to urban development and urban sprawl. Green roof systems can provide numerous potential benefits, both public and private, including improved control of a …
-
High fidelity modelling of neighbourhood-scale environments
Arrays of buildings with pitched roofs are common in urban and suburban areas of European cities. Large-eddy simulations are performed to predict the boundary-layer flows over flat and pitched-roof cuboids to gain a greater understanding of the impact of pitched roofs on urban boundary layers. The …
-
Detached House
… The family house is located on a relatively flat plot and is situated on the north side. The house has two floors, with a balcony on the second floor and flat roof. On the east side there is a storage. The whole family building the residence is made of concrete slabs, with the main focus on …
-
Comparaison par modélisation de la production de ruissellement de toitures stockantes (toitures végétalisées et toiture bac)
… effect could be reduced by disconnecting roofs from the sewer system. This study represents a first attempt to establish a model concerning green roofs and flat roof storage systems based on a physical approach method. The aim is to deduce their respective effect on water runoff management …
-
Residential Building
… is made of precast concrete ytong blocks and a flat roof with a slope of 1 °.
-
Moisture occurrence in roof assemblies containing moisture storing insulation and its impact on the durability of building envelope
… materials and contamination of the indoor air. Roof assemblies thus insulated are particularly vulnerable to the mechanism of moisture accumulation. The objective of this study is to investigate the pattern of moisture accumulation in single cavity flat roofs fully insulated with cellulose …
-
Roof pressures in the corner region measured on a full-scale low-rise building
Corner vortices along the roof have proven to be one of the most destructive forces created when wind interacts with a building. Conical vortices are generated close to the corner along both edges of the roof when the wind angle of attack acts Into the roof corner. To better understand the …
-
Development of Large-Scale Particle Tracking Velocimetry: A Comparison Between 2D and 3D Techniques
… as a baseline for measuring wind flow over a flat roof in a 3m x 3m x 1.5m volume. The LS-PTV (2D) system covered a 1.5m x 3m plane within the same volume. A 3D ultrasonic anemometer was used outside of the measurement volume as a means to validate the LS-PTV measurements. An analytical model …
-
The Effect of Overhang on Wind-Driven Rain Wetting for a Mid-Rise Building
… failures of building materials and components. Roof overhangs are a common feature that can be used to reduce the amount of WDR on building facades. Experimental studies and CFD modeling have shown that roof overhangs shelter the building facade from WDR. However, there is limited quantitative …
-
Comparison of the energy and economic feasibility of different building systems.
… (HVAC) technologies widely used: Single Zone Roof Top Air-conditioning Unit (RTU), Ground Source Heat Pump (GSHP), Variable Air Volume (VAV) RTU, Demand Controlled Ventilation (DCV), and Natural Daylighting.</p> <p>Each system will be modeled in two different building types. The first being a …
-
Modest Modernism : elevating the urbanizaciones of Puerto Rico
… the new house that everyone wanted had a flat roof and was made of reinforced concrete, with breezy spaces between each house, that took advantage of the tropical climate. These modest versions of tropical Modernist architecture shared similar characteristics to their larger counterparts, …
-
In-situ monitoring of an Omni directional roof vent on a low slope single ply roof to identify most efficient porous underlayment for maximum pressure propagation
… study was carried out on a single-ply low-slope roof using a series of different underlayment layers to test and understand distributional characteristics of negative air pressure throughout the roof assembly, when subjected to suction pressure corresponding to different wind speeds. Various …
Page 1 of 104