Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"flexible composite."”.

  1. Flexible composite propeller design using constrained optimization techniques

    … of a conventional propeller, made from composite materials, was conducted in which its characteristics were studied under quasi-static aerodynamic loading. Also, optimized designing of a composite propeller was performed for various constrained and unconstrained design objectives. Only …

    iastate Repository record for Flexible composite propeller design using constrained optimization techniques (opens in a new tab)

  2. Mechanics of Flexible Composite Hull Panels Subjected to Water Impacts

    … measurements of the loading and responses of flexible hull panels during slamming events. Significant research into slamming loads and pressures has previously been undertaken, dating back to 1929, however there is a lack of experimental data on flexible structures accurate enough to allow for …

    auckland-ms Repository record for Mechanics of Flexible Composite Hull Panels Subjected to Water Impacts (opens in a new tab)

  3. Structures, properties and applications of multifunctional lignin nanofibres

    … were conducted by (1) designing lignin-based composite carbon nanofibre; (2) preparing architecturally-designed lignin-based nanofibres and (3) preparing architecturally-designed lignin-based composite nanofibres. Examples of the advanced applications of the functionalized lignin based …

    ubc Repository record for Structures, properties and applications of multifunctional lignin nanofibres (opens in a new tab) Download PDF for Structures, properties and applications of multifunctional lignin nanofibres (opens in a new tab)

  4. Hybrid Bivouac: High-Modulus Composite Membranes for Portable Shelters

    … and fabrication process for fibre-based composites through the design of a lightweight, portable shelter for backpacking and mountaineering. Existing tent typologies compromise either lightness or strength, leaving users to choose between lightweight and minimal enclosures that require …

    waterloo Repository record for Hybrid Bivouac: High-Modulus Composite Membranes for Portable Shelters (opens in a new tab)

  5. Aeroelastic analysis and optimizations for composite blades on floating offshore wind turbine

    … behaviour and its structural responses of thecomposite blades, particularly under complex operational conditions such as thoseexperienced by floating offshore wind turbines (FOWTs). However, analysing theaeroelastic responses of such composite structures can encounter significantcomputational …

    strathclyde Repository record for Aeroelastic analysis and optimizations for composite blades on floating offshore wind turbine (opens in a new tab)

  6. Process Engineering for High-Energy Density and High-Power Lithium Metal Batteries

    … density and stability. These include thin, flexible composite solid electrolytes (CSEs) made using the non-solvent-induced phase separation (NIPS) method, which improves safety and suppresses dendrite growth. My research also includes in-situ polymerizable CSEs that offer high mechanical …

    gatech Repository record for Process Engineering for High-Energy Density and High-Power Lithium Metal Batteries (opens in a new tab)

  7. Self-healing Composites Materials for Flexible Electronics

    Flexible electronics hold great potential in various applications including wearable electronics, soft robotics, and human-machine interface that would be difficult to achieve with conventional wafer-based electronics. However, components of these devices are often exposed to external environment …

    toronto-retro Repository record for Self-healing Composites Materials for Flexible Electronics (opens in a new tab)

  8. SMART ARCHITECTURAL MATERIALS - Integrazione di cellule fotovoltaiche su substrato flessibile in fogli di materiale composito, per la realizzazione di involucri architettonici smart

    … for dynamic envelopes, characterized by a flexible composite material integrated with high-efficiency photovoltaic cells, called SLICE, which is the acronym for Solar Lightweight Intelligent Component for Envelopes. The research work was developed by a multidisciplinary research group lead …

    catania Repository record for SMART ARCHITECTURAL MATERIALS - Integrazione di cellule fotovoltaiche su substrato flessibile in fogli di materiale composito, per la realizzazione di involucri architettonici smart (opens in a new tab)

  9. Spatially defined crystallinity within multimaterial polymeric networks

    … the mechanisms of selective straining and flexible composite systems. With interest in spatially specified stiffness within materials, additive manufacturing was a natural progression due to the ability to develop complex 3D objects. In this regard, the monolithic nature of most resins …

    texas Repository record for Spatially defined crystallinity within multimaterial polymeric networks (opens in a new tab)

  10. Inorganic metal halide perovskite nanofibers for electronic textiles

    … components into nanofibers, aligning with the flexible and soft nature of yarns. In this work, to develop smart yarns responsive to mechanical and optical stimuli, flexible composite nanofibers, integrating inorganic metal halide perovskites (MHPs) with polymer nanofibers, were studied. These …

    ubc Repository record for Inorganic metal halide perovskite nanofibers for electronic textiles (opens in a new tab) Download PDF for Inorganic metal halide perovskite nanofibers for electronic textiles (opens in a new tab)

  11. Polymeric Signal Amplifiers in Biosensing

    … sulfonate) (PEDOT:PSS) based, highly-responsive flexible composite nanofiber signal amplifier for ultrasensitive detection of thrombin and IL-17 A. The serum IL-17 A in melanoma patients were quantified by this sensor.

    houston Repository record for Polymeric Signal Amplifiers in Biosensing (opens in a new tab)

  12. Flexible Piezoelectric Sensors Based on Single-Crystalline III-N Thin Films for Personal-Healthcare and Extreme-Environment Applications

    … extra electric poling. In order to fabricate the flexible PPSs (F-PPSs), well-known layer-transfer method was applied to III-N thin films. This dissertation mainly covers five major topics using III-N thin film based F-PPSs. The first topic introduces that F-PPS was used for epidermic sensor with …

    houston Repository record for Flexible Piezoelectric Sensors Based on Single-Crystalline III-N Thin Films for Personal-Healthcare and Extreme-Environment Applications (opens in a new tab)

  13. Characterization of Application-Driven Sol-Gel Coated Meshes and Composites

    … and their application to polymer-based composites, was studied. Zirconia antistatic coatings were synthesized by a low cost dip coating sol-gel route on glass substrates, then applied to polymer-based composites to potentially improve their dust or water repellent capabilities for …

    lsu-thes Repository record for Characterization of Application-Driven Sol-Gel Coated Meshes and Composites (opens in a new tab)

  14. Numerical and experimental validation of the optimization methodologies for a wing-tip structure equipped with conventional and morphing ailerons

    … aluminium upper surface of the wing with a flexible composite skin for morphing abilities. For the ATR-42 ‘Morphing wing’ project, the wing models were manufactured entirely from composite materials and the morphing region was optimized for flexibility. In this project two rigid wing models …

    ets-quebec Download PDF for Numerical and experimental validation of the optimization methodologies for a wing-tip structure equipped with conventional and morphing ailerons (opens in a new tab)

  15. Local plastic deformation in pressure and tensile armour layers of flexible risers

    <p>Flexible pipes are commonly used for connecting seabed flow-lines to floating production facilities. The general riser design consists of an internal carcass for collapse resistance, a polymer fluid barrier, carbon steel interlocked circumferential pressure armour layer for resisting internal …

    sheffield-hallam Download file for Local plastic deformation in pressure and tensile armour layers of flexible risers (opens in a new tab)

  16. Influence of Overlaps on Towpreg Bonding in Automated Fiber Placement: Experiment, Simulations and Compaction Roller Design

    … Fiber Placement (AFP) enables precise and flexible composite manufacturing but remains sensitive to surface irregularities and disturbances in process parameters. Among common defects, tape overlaps can introduce surface irregularities that create regions of insufficient inter-laminar …

    concordia Download PDF for Influence of Overlaps on Towpreg Bonding in Automated Fiber Placement: Experiment, Simulations and Compaction Roller Design (opens in a new tab)

  17. Heterogeneous Distribution and Corresponding Mechanical Significance of The Mineral Phase in Fish Scales

    Fish scales can be considered as a laminated composite based on collagen fibrils arranged in a cross-plywood structure. This collagen-based composite is often partially mineralized (primarily hydroxyapatite) in the scale exterior in order to resist penetration and hence to enhance protection. …

    vt Repository record for Heterogeneous Distribution and Corresponding Mechanical Significance of The Mineral Phase in Fish Scales (opens in a new tab)

  18. Direct velocity feedback control of equipment vibration

    … (DVFB) in reducing vibration transmission from a flexible vibrating base to a mounted equipment structure. The first objective of coupling an active controller to existing passive mounts is to attenuate the low frequency amplification effect generated by the passive isolation system. Passive …

    soton Download PDF for Direct velocity feedback control of equipment vibration (opens in a new tab)

  19. Experimental and numerical investigation of slamming loads on high-speed craft including hydroelastic effects

    … impact of two- and three-dimensional rigid and flexible structures is developed. The model uses the commercial CFD software Star CCM+ to solve for the fluid flow and the FE code ABAQUS to solve for the structural response. Two different water entry problems are studied - the water impact of a …

    soton Download PDF for Experimental and numerical investigation of slamming loads on high-speed craft including hydroelastic effects (opens in a new tab)

Page 1 of 2