Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 104 for “"flexural tests"”.

  1. Computer-simulated flexural tests of fully prestressed AASHTO Type-1 bridge girders

    <p>The behavior of prestressed concrete beams Is a function of several variables. Analytical methods have been developed for computing the ultimate behavior of prestressed concrete beams but at the high cost of experimentation. This study is an attempt to predict ultimate behavior of AASHTO Type-I …

    ut-knoxville Repository record for Computer-simulated flexural tests of fully prestressed AASHTO Type-1 bridge girders (opens in a new tab)

  2. Experimental and analytical study of the shear transfer in composite shallow cellular floor beams

    … shear connections. In total, 24 push-out tests were performed in two test series to investigate the load-slip behaviour and shear resistance of the shear connections under direct shear force. The failure mechanisms of the two forms of shear connections were extensively studied, which lead …

    city-london Download PDF for Experimental and analytical study of the shear transfer in composite shallow cellular floor beams (opens in a new tab)

  3. Determination of the longitudinal strength and stiffness of corrugated metal pipe

    … additional research was undertaken. Longitudinal flexural tests of full-scale CMP in the laboratory with no soil interaction were conducted to determine the longitudinal moment capacity and stiffness. Subsequently, analytical models were developed to estimate longitudinal moment capacity and …

    iastate Repository record for Determination of the longitudinal strength and stiffness of corrugated metal pipe (opens in a new tab)

  4. Πειραματική διερεύνηση της συμπεριφοράς δοκών από σκυρόδεμα ενισχυμένων με πολυμερή οπλισμένα με χάλυβα ή άνθρακα

    Εxperimental Results from comparative tests at the laboratory of Steel (SRP) and Carbon (CFRP) Reinforced Rolymers are given in the present dissertation. Tensile stress-strain, as well as bond constitutive laws were derived from sixteen (16) test specimens. Results are then reported from flexural …

    greece Repository record for Πειραματική διερεύνηση της συμπεριφοράς δοκών από σκυρόδεμα ενισχυμένων με πολυμερή οπλισμένα με χάλυβα ή άνθρακα (opens in a new tab)

  5. Repair of Impact-Damaged Prestressed Bridge Girders Using Strand Splices and Fiber-Reinforced Polymer

    … evaluation of the repair installation and flexural strength of four AASHTO Type III girders that were intentionally damaged and repaired. In addition, nonlinear finite element modeling was used to aid in the development of design protocols for each repair method. This report discusses two …

    vt Repository record for Repair of Impact-Damaged Prestressed Bridge Girders Using Strand Splices and Fiber-Reinforced Polymer (opens in a new tab)

  6. An investigation of the effects of additive friction stir deposition on railroad rails

    … head of existing AREMA 115RE rails. Two types of tests were performed to evaluate the effectiveness of AFSD; flexural bend tests and cyclic fatigue tests. The flexural tests evaluated the maximum load capacity of rails with different types of additive deposition parameters with respect to the …

    texas Repository record for An investigation of the effects of additive friction stir deposition on railroad rails (opens in a new tab)

  7. Investigations on the bond behaviour of a hybrid lap-spliced connection of GFRP and stainless steel bars

    … the tensile lap-spliced steel and FRP bars in flexural concrete specimens is collected and systematically analyzed. Building on the results, a three-level based investigation method is outlined to study the mechanical behavior of the hybrid lap-spliced connection between GFRP bars and steel …

    qucosa-diss

  8. On the deflection of s32003 stainless steel beams

    Presented in this work are the results of twelve flexural tests conducted on small-scale coupons to establish the load-deflection behavior of UNS S32003 (ATI 2003®) hot-rolled duplex stainless steel flat plates. All specimens were tested as simply supported beams loaded at the midspan. Test …

    gatech Repository record for On the deflection of s32003 stainless steel beams (opens in a new tab)

  9. Properties of steel micro-fiber reinforced cementitious material

    … of SMFRM in flexure. Single fiber pull-out tests were used to study the characteristics of bond between steel micro-fiber and cement paste. A feed-back controlled system, which could avoid the sudden fracture of specimens at peak load, was installed in the uniaxial tensile tests. Similarly, …

    ubc Repository record for Properties of steel micro-fiber reinforced cementitious material (opens in a new tab) Download PDF for Properties of steel micro-fiber reinforced cementitious material (opens in a new tab)

  10. Structural glass flexural strengthening with CFRP composites and Fe-SMA based on passive, active and hybrid techniques

    … The experimental programs included (i) tensile tests on double-lap joints to assess the bond performance of glass-to- CFRP adhesive connections, (ii) flexural tests on small-scale monolithic glass beams with externally bonded CFRP or Fe-SMA reinforcements, and (iii) flexural tests on large-scale …

    minho-thes Repository record for Structural glass flexural strengthening with CFRP composites and Fe-SMA based on passive, active and hybrid techniques (opens in a new tab)

  11. FATIGUE DEGRADATION SENSING WITH SURFACE MOUNTED CONJUGATE-STRESS (CS) SENSOR

    … both quasi-static axial cycling and dynamic flexural loading conditions. The CS sensor’s capability to recognize fatigue was examined by observing the correlation between its readings and the host material's stiffness. Low carbon steel dog bone coupons and welded cruciform specimens were …

    maryland Repository record for FATIGUE DEGRADATION SENSING WITH SURFACE MOUNTED CONJUGATE-STRESS (CS) SENSOR (opens in a new tab)

  12. Radiation Shielding Bricks for Mars Using Martian Regolith Simulant and Hydrogen-Rich Polymers

    … of polymer, and the method in which it was made. Flexural tests were conducted on the bricks to determine the flexural strength, flexural strain, and modulus of elasticity. OLTARIS was used to estimate the effectiveness of these bricks to shield against GCR on the Martian surface.

    wm-mary Repository record for Radiation Shielding Bricks for Mars Using Martian Regolith Simulant and Hydrogen-Rich Polymers (opens in a new tab)

  13. Development of a Self-Heating Consolidation Procedure for 3D-Printed Continuous Wire Polymer Composite Laminates

    … were 91.6% lower compared to unprocessed, while flexural tests found 5% and 12% higher flexural strength and stiffness respectively. Next, the effects of the consolidation procedure were tested on the uniaxial tensile properties of unidirectional and cross-ply 3D-printed CWPC samples, showing …

    york Repository record for Development of a Self-Heating Consolidation Procedure for 3D-Printed Continuous Wire Polymer Composite Laminates (opens in a new tab)

  14. The development of a hollow concrete masonry system for use with near-surface mounted reinforcement

    … concrete masonry systems. Pull-out and flexural tests performed on reinforced SRCMU specimens indicate it is possible to achieve a good bond between the SRCMU system and the reinforcing bars; up to 60kN of pull out force was developed in 590mm of bonded length, and flexural specimens …

    manitoba Repository record for The development of a hollow concrete masonry system for use with near-surface mounted reinforcement (opens in a new tab)

  15. Ανάπτυξη, παραγωγή και εφαρμογές ελαφροσκυροδέματος υψηλής ανθεκτικότητας και βιωσιμότητας

    … conducted. Uniaxial compression and three-point flexural tests are performed on concrete specimens extracted from each concrete composition considered. Specifically, three different mix compositions of PePu mixture are examined, with varying fiber percentages (Vf=0.25% and Vf=0.50%).At the …

    greece Repository record for Ανάπτυξη, παραγωγή και εφαρμογές ελαφροσκυροδέματος υψηλής ανθεκτικότητας και βιωσιμότητας (opens in a new tab)

  16. Increasing residual structural capacity of cracked concrete railroad crossties with polypropylene fibers

    … the concrete has cracked. The center negative flexural cracking is considered as a serious failure mode in concrete railroad crossties, which decreases structural capacity and results in safety issues. It also leads to deterioration of prestressed concrete crossties and shortens the service …

    uiuc Repository record for Increasing residual structural capacity of cracked concrete railroad crossties with polypropylene fibers (opens in a new tab)

  17. Performance of concrete beams and slabs reinforced with FRP grids

    … properties of FRP materials, testing the flexural behavior and servicability of concrete beams and slabs reinforced with FRP grids, and determining splice and development length requirements for FRP grids. Design recommendations concerning failure mode, deflections, anchorage requirements …

    unh-thes Repository record for Performance of concrete beams and slabs reinforced with FRP grids (opens in a new tab)

  18. Bond and ductility of concrete reinforced with various steel bars surface and ductility conditions

    … interaction between steel and concrete and the flexural behaviour of RC beams. Pull-out forces have been exerted on the reinforcing bars in RC blocks to examine the impact of steel properties on the bond strength and failure mode of the blocks. In addition to that, flexural tests have been …

    birmingham Download PDF for Bond and ductility of concrete reinforced with various steel bars surface and ductility conditions (opens in a new tab)

Page 1 of 6