Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"flexure strength"”.

  1. Tensile and Flexure Strength of Unidirectional Fiber-Reinforced Composites: Direct Numerical Simulations and Analytic Models

    … composites is used to predict the tensile strength of metal matrix composites consisting of a Titanium matrix and unidirectionally aligned SiC fibers. This model is extended to include the effects of free boundary conditions and non-constant load gradients and then used to predict the …

    vt Repository record for Tensile and Flexure Strength of Unidirectional Fiber-Reinforced Composites: Direct Numerical Simulations and Analytic Models (opens in a new tab)

  2. Structure, property, and processing relationships of CMZP - [(Ca<sub>0.6</sub>,Mg<sub>0.4</sub>)Zr₄(PO₄)₆]

    … optimized to yield the highest room temperature flexure strength. Mechanical properties of the hot pressed CMZP at room temperature were: (1) a four-point flexure strength of 124.77 MPa, (2) an elastic modulus of 118.45 GPa, and (3) a Weibull modulus of 10.7. At 850°C, the flexure strength and …

    vt Repository record for Structure, property, and processing relationships of CMZP - [(Ca<sub>0.6</sub>,Mg<sub>0.4</sub>)Zr₄(PO₄)₆] (opens in a new tab)

  3. Flexure Properties of 3D Printed Nylon Carbon Fiber Composite and Stiffness of 3D Printed Modified Cuttlefish Bone Structure

    Flexure strength is one of the most widely used mechanical properties to represent the mechanical behavior of the composite. Fiber reinforcements increase the flexure strength of a composite. Specifically, there has been tremendous growth in the use of Carbon Fiber (CF) in the manufacturing …

    sdstate Repository record for Flexure Properties of 3D Printed Nylon Carbon Fiber Composite and Stiffness of 3D Printed Modified Cuttlefish Bone Structure (opens in a new tab)

  4. Recycled and tyre-derived aggregates in concrete and its performance evaluation for kerb application

    … in Australia requires mostly meeting compressive strength. However, improved flexure strength and other concrete properties are necessary too. This thesis presents comprehensive testing to evaluate the construction of kerb using recycled concrete aggregate and tyre-derived aggregate (TDA) to …

    adelaide Repository record for Recycled and tyre-derived aggregates in concrete and its performance evaluation for kerb application (opens in a new tab)

  5. Experimental Characterization of the Effect of Microstructure on the Dynamic Behavior of SiC

    … ceramics have extremely high compressive strengths and low densities. One ceramic that has been shown to be highly resistant under ballistic impact is silicon carbide (SiC). It has been found that even within the silicon carbides, those manufactured by certain methods and those with …

    gatech Repository record for Experimental Characterization of the Effect of Microstructure on the Dynamic Behavior of SiC (opens in a new tab)

  6. Rolling contact fatigue of silicon nitride.

    … have been carried out to link the surface strengths of Silicon Nitride derived from half-rod and C-Sphere flexure strength specimens to the rolling contact lives of Silicon Nitride rod and ball specimens. The rolling contact fatigue tests were carried out on ball-on-rod and modified …

    bournemouth Download PDF for Rolling contact fatigue of silicon nitride. (opens in a new tab)

  7. Damage evaluation in dimension limestone using nonlinear ultrasonics

    … In addition, the test samples’ degradation of flexure strength due to damage accumulation caused by the exposure to increasing levels of temperature was also obtained using four-point bending tests. Results using the currently used non-collinear ultrasonic wave mixing approach correlate well …

    uiuc Repository record for Damage evaluation in dimension limestone using nonlinear ultrasonics (opens in a new tab)

  8. Nanographene reinforced carbon/carbon composites

    … and were characterized for morphology, flexure and ther-mal properties. Finally, NGP were introduced into the carbon/carboncomposites in two stages, first by spraying in different concentrations (0.5wt%, 1.5wt%, 3wt%, 5wt %) dur-ing the prepreg formation and later during densification by …

    uab Repository record for Nanographene reinforced carbon/carbon composites (opens in a new tab)

  9. Processing, microstructure, and mechanical properties of zirconium diboride-molybdenum disilicide ceramics and dual composite architectures

    … 1500⁰C. Elastic moduli, fracture toughness, and flexure strength were measured at RT and 1500⁰C for 15 ZrB<sub>2</sub>-MoSi<sub>2</sub> ceramics hot pressed using fine, medium, or coarse ZrB<sub>2</sub> starting powder with 5-70 vol.% MoSi<sub>2</sub>, referred to as FX, MX, and CX respectively …

    must-thes Repository record for Processing, microstructure, and mechanical properties of zirconium diboride-molybdenum disilicide ceramics and dual composite architectures (opens in a new tab)

  10. Hybridization of Bast Natural and Synthetic Fibers in Thermoplastic Composites

    … has grown substantially. Applications of high strength require high mechanical properties. An effective method for increasing the field of application and mechanical properties is the hybridization of natural fibers with synthetic fibers. In this research, the effects of recycled carbon fiber …

    ndsu Repository record for Hybridization of Bast Natural and Synthetic Fibers in Thermoplastic Composites (opens in a new tab)

  11. An Investigation of the Structure-Property Relationships for High Performance Thermoplastic Matrix, Carbon Fiber Composites with a Tailored Polyimide Interphase

    … polyamic acid salts were used. The transverse flexure strength was used to qualitatively rank the composites by level of interfacial shear strength. The longitudinal tensile strength of the composites was shown to vary with relative interfacial shear strength. The trend of these data …

    vt Repository record for An Investigation of the Structure-Property Relationships for High Performance Thermoplastic Matrix, Carbon Fiber Composites with a Tailored Polyimide Interphase (opens in a new tab)

  12. Evaluation of the Mechanical Properties of Solid Oxide Fuel Cell Materials

    … SOFCs. In the present investigation, the strength distribution and Slow Crack Growth (SCG) behavior of a dense MMA manifold material and porous MMA tube material were evaluated via 4-point flexural testing at temperatures of 20°C, 50°C, and 850°C under wide range of environmental …

    washington Repository record for Evaluation of the Mechanical Properties of Solid Oxide Fuel Cell Materials (opens in a new tab)

  13. Practical Performance Criteria and Durability Prediction Modeling of Glass Fiber Reinforced Polymer (GFRP) Bars

    … quality control tests (tensile, shear, flexure, and cure ratio tests). Bars from two different companies with two different diameters and three different surface finishes were included in this study. Based on obtained results it was postulated that variability of the currently available …

    waterloo Repository record for Practical Performance Criteria and Durability Prediction Modeling of Glass Fiber Reinforced Polymer (GFRP) Bars (opens in a new tab)

  14. Preparation, microstructure and properties of silicon carbide-dysprosia composites

    … were: modulus of elasticity, hardness, flexure strength and fracture toughness. The hardness of the composites was determined using the Vickers indentation method. Elastic properties were determined by the ultrasonic pulse echo technique. Flexure strengths were determined using four …

    uiuc Repository record for Preparation, microstructure and properties of silicon carbide-dysprosia composites (opens in a new tab)

  15. Processing-Structure Relationships of Reactive Spark Plasma Sintered Diamond Composites

    … relatively small differences in hardness, flexure strength, and fracture toughness. Many of the routes taken during the synthesis of the powder and sintering of the plates using traditional ceramic processing techniques have long processing times, tend to leave asperities within the …

    unt Repository record for Processing-Structure Relationships of Reactive Spark Plasma Sintered Diamond Composites (opens in a new tab)

  16. Innovative Value-Added Grain Bags Recycling with Sand

    … technique. The density, compressive and flexure strength and related moduli for various weight percentages of sand and reclaimed polyethylene were measured using ASTM C570 and C580 standards, then mathematically modeled. The used grain bag formed the matrix material with the sand being …

    regina Repository record for Innovative Value-Added Grain Bags Recycling with Sand (opens in a new tab) Download PDF for Innovative Value-Added Grain Bags Recycling with Sand (opens in a new tab)

  17. Design and Evaluation of Antibiofilm Dental Adhesives Incorporating Marine Alkaloid-Inspired Compounds

    … experimental groups using degree of conversion, flexure strength, and crystal violet assay. Increasing the concentration of H10/HEMA showed a promising inhibition capacity against Streptococcus Mutans biofilm formation, but it seems to negatively impact the structure of the polymer network. …

    ecu Repository record for Design and Evaluation of Antibiofilm Dental Adhesives Incorporating Marine Alkaloid-Inspired Compounds (opens in a new tab) Embargoed until 2028-07-01

  18. Elevated temperature mechanical properties of zirconium diboride based ceramics

    … of ZrB₂ based ceramic at elevated temperatures. Flexure strength, fracture toughness, and elastic modulus were measured at temperatures up to 2300ºC for three compositions: monolithic ZrB₂ (Z); ZrB₂ - 30 vol% SiC - 2 vol% B₄ C (ZS); and ZrB₂ - 10 vol% ZrC (ZC). In argon, Z, ZS, and ZC had …

    must-thes Repository record for Elevated temperature mechanical properties of zirconium diboride based ceramics (opens in a new tab)

  19. Production and Optimization of Continuous Roving-Like UTSI Pitch based Carbon Fiber Composites

    … revealed improvements in interfacial shear strength between oxidized carbon fiber (CF) and epoxy resin. Ozone treatment proved to be optimal, increasing flexure strength two-fold with respect to composites fabricated using as received CF.</p>

    ut-knoxville Repository record for Production and Optimization of Continuous Roving-Like UTSI Pitch based Carbon Fiber Composites (opens in a new tab)

  20. Fiber Metal Laminate with Thickness Reinforcement

    … and are used to enhance the bonding strength between the fiber composites and the metal. Process optimization is performed for the VARTM process used in manufacturing the thermoset composite FML in order to gain full benefit of the through thickness reinforcement. Extra pressure in …

    uab Repository record for Fiber Metal Laminate with Thickness Reinforcement (opens in a new tab)

Page 1 of 2