Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"floor vibration"”.

  1. Prediction of Floor Vibration Response Using the Finite Element Method

    Several different aspects of floor vibrations were studied during this research. The focus of the research was on developing a computer modeling technique that will predict the fundamental frequency of vibration and the peak acceleration due to walking excitation as given in AISC Design Guide 11, …

    vt Repository record for Prediction of Floor Vibration Response Using the Finite Element Method (opens in a new tab)

  2. Energy-based Footstep Localization using Floor Vibration Measurements from Accelerometers

    … dispersive medium (waveguide) using a network of vibration sensors (accelerometers), distributed at various locations in the waveguide, measuring (and detecting the arrival of) the impact-generated seismic wave. In particular, the last part of this document focuses on the problem of localizing …

    vt Repository record for Energy-based Footstep Localization using Floor Vibration Measurements from Accelerometers (opens in a new tab)

  3. The Non-Linear Energy Sink Applied to Vertical Floor Vibration Mitigation

    … energy sink (NES) and its application to floor vibration mitigation. The NES is a passive type mass damper comprised of an essentially non-linear stiffness component. This non-linear stiffness property allows the NES to interact with a wide variety of frequency regimes that can vary both …

    ut-knoxville Repository record for The Non-Linear Energy Sink Applied to Vertical Floor Vibration Mitigation (opens in a new tab)

  4. LOCALIZATION OF STATIONARY SOURCE OF FLOOR VIBRATION USING THE STEERED RESPONSE POWER METHOD

    If the generated vibration in a building exceeds the acceptable limit design for a floor system, it is necessary to identify the source of vibration, a process known as localization. The objective of this study is the localization of stationary vibration sources, and the approach used is the …

    uky-thes Repository record for LOCALIZATION OF STATIONARY SOURCE OF FLOOR VIBRATION USING THE STEERED RESPONSE POWER METHOD (opens in a new tab)

  5. Floor Vibration Design Criterion For Cold-Formed C-Shaped Supported Residential Floor Systems

    Annoying floor vibration due to normal human activity was investigated for cold-formed C-shaped residential floors systems. Dynamic impact and static loading tests were performed on twelve full size laboratory floors and five two-joist line laboratory floors to determine the influencing …

    vt Repository record for Floor Vibration Design Criterion For Cold-Formed C-Shaped Supported Residential Floor Systems (opens in a new tab)

  6. Application of Magneto-Rheological Dampers in Tuned Mass Dampers for Floor Vibration Control

    … (MR) dampers to mitigate annoying floor vibrations. Annoying floor vibration is becoming more common in today's building structures since building materials have become stronger and lighter; the advent of computers has resulted in "paperless" offices; and the use of floors for …

    vt Repository record for Application of Magneto-Rheological Dampers in Tuned Mass Dampers for Floor Vibration Control (opens in a new tab)

  7. The use of tuned mass dampers to control annoying floor vibrations

    Floor vibrations due to occupancy activities on a floor are sometimes annoying to the occupants. Correcting floor vibrations is difficult and can be expensive. The use of tuned mass dampers to control annoying floor vibrations is sometimes a viable solution. Tuned mass dampers (TMDs) have been used …

    vt Repository record for The use of tuned mass dampers to control annoying floor vibrations (opens in a new tab)

  8. Design considerations for mid-rise steel frame structures using wood-based flooring systems

    … mid-rise steel frame structures using wood-based flooring systems. Gravity load design aspects including composite behaviour, structural weight, floor vibration and lateral bracing are considered for joisted and panel floors in steel building structures. The influence of joisted wood-based …

    ubc Repository record for Design considerations for mid-rise steel frame structures using wood-based flooring systems (opens in a new tab) Download PDF for Design considerations for mid-rise steel frame structures using wood-based flooring systems (opens in a new tab)

  9. Vibration and Flexural Strength Characteristics of Composite Castellated Beams

    … lightweight concrete and design optimizations, floor vibration problems are becoming a serious serviceability problem. The castellated beam is a prime example and was the focus of this study. The vibration and flexural strength performance were verified in this paper. The vibration …

    vt Repository record for Vibration and Flexural Strength Characteristics of Composite Castellated Beams (opens in a new tab)

  10. Finite Element Modeling for Prediction of Low Frequency Floor Vibrations Due to Walking

    Floor vibration serviceability is a primary design consideration for steel framed floors. Designers in North America typically use the AISC Design Guide 11 methods to check this limit state, but its methods are difficult to apply to atypical floor framing. Finite element analysis is a logical …

    vt Repository record for Finite Element Modeling for Prediction of Low Frequency Floor Vibrations Due to Walking (opens in a new tab)

  11. Vibration characteristics of joist and joist-girder members

    … steel beam and steel joist-concrete slab floor systems, floor vibration problems are becoming more and more prevalent. This paper presents the experimental and analytical study of the vibration characteristics of steel joist and joist-girder members. Three aspects were studied to prevent …

    vt Repository record for Vibration characteristics of joist and joist-girder members (opens in a new tab)

  12. Reliability of floors under impact vibration

    Floor vibration is a serviceability limit state problem as opposed to limit state of collapse. People find excessive vibrations annoying and it leads to unacceptable floor performance. Improvements in design techniques and use of higher strength materials have made floors lighter and more sensitive …

    ubc Repository record for Reliability of floors under impact vibration (opens in a new tab) Download PDF for Reliability of floors under impact vibration (opens in a new tab)

  13. Data-driven methods for analyzing ballistocardiograms in longitudinal cardiovascular monitoring

    … of noise and motion artifacts caused by floor vibration, unconstrained subject movements, or even the respiratory activities. Aging, diseases, breathing, and sleep disorders can also affect the quality of estimation as they slightly modify the morphology of the BCG waveform.

    missouri Repository record for Data-driven methods for analyzing ballistocardiograms in longitudinal cardiovascular monitoring (opens in a new tab)

  14. Vibration of lightweight wooden floors : experimental and analytical evaluation

    An experimental study of two lightweight wooden floors’ dynamic response was per formed. The objective of this study was to evaluate the applicability of the computer programs, NAFFAP and DYFAP, for the case of lightweight wooden floor vibration. The program NAFFAP solves for the floor system’s …

    ubc Repository record for Vibration of lightweight wooden floors : experimental and analytical evaluation (opens in a new tab) Download PDF for Vibration of lightweight wooden floors : experimental and analytical evaluation (opens in a new tab)

  15. Experimental and Analytical Study of Vibrations in Long Span Deck Floor Systems

    … analytical research was conducted to address the vibration properties of Long Span Deck Floor Systems (LSDFS). The research comprised three stages. In the first part, experimental in-situ tests were conducted on thirteen bays of buildings under construction. The natural frequencies and …

    vt Repository record for Experimental and Analytical Study of Vibrations in Long Span Deck Floor Systems (opens in a new tab)

  16. Optimisation and adaptive control of aircraft propeller synchrophase angles.

    … synchrophase angles for minimum cabin noise and vibration vary with different flight conditions, particularly altitude and airspeed, and how, based on these observations, adaptive control techniques could best be employed to further improve the noise-reducing potential of synchrophasing. This has …

    adelaide Repository record for Optimisation and adaptive control of aircraft propeller synchrophase angles. (opens in a new tab)

  17. Experimental and numerical investigation of human-induced vibration performance in mass timber office buildings

    Timber floors are susceptible to vibration due to their low mass and bending stiffness. Utilizing mass timber products in long-span scenarios, such as in office buildings, makes vibration an important design driver for structural engineers. The performance of long-span office floors is studied both …

    uvic Repository record for Experimental and numerical investigation of human-induced vibration performance in mass timber office buildings (opens in a new tab)

  18. VIBRATION OF STEEL-FRAMED FLOORS SUPPORTING SENSITIVE EQUIPMENT IN HOSPITALS, RESEARCH FACILITIES, AND MANUFACTURING FACILITIES

    Floors have traditionally been designed only for strength and deflection serviceability. As technological advances have been made in medical, scientific and micro-electronics manufacturing, many types of equipment have become sensitive to vibration of the supporting floor. Thus, vibration …

    uky-thes Repository record for VIBRATION OF STEEL-FRAMED FLOORS SUPPORTING SENSITIVE EQUIPMENT IN HOSPITALS, RESEARCH FACILITIES, AND MANUFACTURING FACILITIES (opens in a new tab)

Page 1 of 2