Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"flow arrangement"”.

  1. Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices

    … than 0.1 K/W was demonstrated for both counter flow and parallel flow configurations. The effects of flow direction and interlayer flow rate ratio were investigated. It was found that for the low flow rate range the parallel flow arrangement results in a better overall thermal performance than …

    gatech Repository record for Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices (opens in a new tab)

  2. Current and Temperature Distributions in Proton Exchange Membrane Fuel Cell

    … affected by the organization of the reactant flow arrangements in PEMFCs. Reactant depletion and water formation along the flow channel leads to current variation from the channel inlet to the exit, which leads to non-uniformity of local electrochemical reaction activity, and degradation of …

    waterloo Repository record for Current and Temperature Distributions in Proton Exchange Membrane Fuel Cell (opens in a new tab)

  3. Desalination Using Vapor-Compression Distillation

    … system that employs an improved water flow arrangement. The incoming salt concentration was 0.15% salt for brackish water and 3.5% salt for seawater, whereas the outgoing salt concentration was 1.5% and 7%, respectively. Distillation was performed at 439 K (331oF) and 722 kPa (105 psia) …

    tamu Repository record for Desalination Using Vapor-Compression Distillation (opens in a new tab)

  4. Plate frame and bar plate evaporator model validation and volume minimization

    … heat exchanger types, in parallel and counter flow arrangements were minimized in this study. The minimum volume was achieved by varying the ratio between core length and number of channels. It was found that for both heat exchanger types, the parallel flow arrangement resulted in a smaller …

    colostate Repository record for Plate frame and bar plate evaporator model validation and volume minimization (opens in a new tab)

  5. Rib-roughened heat and mass transfer enhancement in membrane-based energy recovery ventilators

    … of compact channels in a cross- or counter-flow arrangement separated by moisture-permeable membranes. This work employs computational fluid dynamics with experimental validation to study angled rib mixing features to enhance heat and mass transport in membrane-based ERVs. The model …

    ubc Repository record for Rib-roughened heat and mass transfer enhancement in membrane-based energy recovery ventilators (opens in a new tab) Download PDF for Rib-roughened heat and mass transfer enhancement in membrane-based energy recovery ventilators (opens in a new tab)

  6. Membrane-Based Energy Recovery Ventilator Coupled with Thermal Energy Storage Using Phase Change Material for Efficient Building Energy Savings

    … other forming adjacent channels in a counter-flow arrangement for OFA and EA streams. Heat and moisture is diffused through the membrane core. Flat-plate encapsulated PCM is arranged in OFA duct upstream/downstream of the ERV thereby allowing for further reduction in temperature by virtue of …

    unt Repository record for Membrane-Based Energy Recovery Ventilator Coupled with Thermal Energy Storage Using Phase Change Material for Efficient Building Energy Savings (opens in a new tab)

  7. Estimation of Thermal and Hydraulic Characteristics of Compact Brazed Plate Heat Exchangers

    … choice of boundary conditions and turbulent flow modeling on the accuracy of the thermal and hydraulic predictions is presented. Benefits of simulation of fluid flow in entire channels and characteristics of channel flow for different geometric patterns are also presented. A computationally …

    lund Repository record for Estimation of Thermal and Hydraulic Characteristics of Compact Brazed Plate Heat Exchangers (opens in a new tab) Download PDF for Estimation of Thermal and Hydraulic Characteristics of Compact Brazed Plate Heat Exchangers (opens in a new tab)

  8. Reproducibility and optimization in capillary electrophoresis

    … in observed peak areas are irreproducible flow rate which influences on-column detector response, and inconsistent injection volume or amount. In addition, current efforts in our laboratory to assess sources of quantitative variance for separations of dansylated amino acids using an …

    utk-theses Repository record for Reproducibility and optimization in capillary electrophoresis (opens in a new tab)

  9. Improving the refrigeration and gas liquefaction performance of Gifford-McMahon and active magnetic regenerative cryocoolers: a study of flow maldistribution, unbalance, and asymmetry

    … operation is required. Models to elucidate the flow characteristics of the regenerative heat exchangers of rotary AMRR and Gifford-McMahon (GM) systems using a commercially available computational fluid dynamics (CFD) software package are described. Theoretical results are presented to qualify …

    uvic Repository record for Improving the refrigeration and gas liquefaction performance of Gifford-McMahon and active magnetic regenerative cryocoolers: a study of flow maldistribution, unbalance, and asymmetry (opens in a new tab)

  10. A methodology for integrated thermofluid modelling of radiant superheaters in steady state and transient operations

    … layout of the tube passes in a tubesheet via the arrangement of the network building blocks. It is also possible to connect tubesheets together across the width of the boiler as per the arrangement in a real plant. The modelling methodology was first used to develop a process model of a convective …

    cape-town Repository record for A methodology for integrated thermofluid modelling of radiant superheaters in steady state and transient operations (opens in a new tab)

  11. Experimental investigation of multi-component jets issuing from model pipeline geometries with application to hydrogen safety

    … Also, from a practical engineering stand-point, flow patterns and dispersion of gas originating from orifices in the side wall of circular pipe or storage tank need to be studied. In this thesis, novel configurations were considered to investigate the evolution of turbulent jets issuing from …

    uvic Repository record for Experimental investigation of multi-component jets issuing from model pipeline geometries with application to hydrogen safety (opens in a new tab)

  12. CFD Simulation of the Thermal Performance of a Parallel Counter-Parallel Flow Heat Exchanger for the Treatment of Hypothermia

    … performance of a parallel/counter-parallel flow heat exchanger used as part of a fluid warmer to treat Hypothermia. The 3D model of the heat exchanger is divided into three regions; Infusate (fluid to be heated), Hot Water (heating fluid), and a Solid Region (wall). At the end of the heat …

    unlv Repository record for CFD Simulation of the Thermal Performance of a Parallel Counter-Parallel Flow Heat Exchanger for the Treatment of Hypothermia (opens in a new tab) Download PDF for CFD Simulation of the Thermal Performance of a Parallel Counter-Parallel Flow Heat Exchanger for the Treatment of Hypothermia (opens in a new tab)

  13. Studies On Copper Extraction With Hydroxyoxime Extractants For The Design Of Hollow Fibre Membrane Based Extraction Processes

    … general it has been found that counter current flow arrangement gave higher concentration driving forces which were reflected in form higher metal concentrations at the extract phase.<br/><br/>A generalised mathematical model was developed in this study which utilised Wilson's method, the …

    southwales Repository record for Studies On Copper Extraction With Hydroxyoxime Extractants For The Design Of Hollow Fibre Membrane Based Extraction Processes (opens in a new tab) Download PDF for Studies On Copper Extraction With Hydroxyoxime Extractants For The Design Of Hollow Fibre Membrane Based Extraction Processes (opens in a new tab)

  14. Θεωρητική και υπολογιστική μελέτη τρισδιάστατης ευστάθειας ροής με ελεύθερη συναγωγή παρουσία μαγνητικού πεδίου σε αγωγό ορθογωνικής διατομής

    … side walls, the nature of the emerging flow pattern is determined by the combined conductivity of Hartmann walls and Hartmann layers, cH+Ha-1. When poor conducting Hartmann walls are considered, cH<<1, the critical eigensolution is characterized by well defined Hartmann and side layers. …

    greece Repository record for Θεωρητική και υπολογιστική μελέτη τρισδιάστατης ευστάθειας ροής με ελεύθερη συναγωγή παρουσία μαγνητικού πεδίου σε αγωγό ορθογωνικής διατομής (opens in a new tab)

  15. Zjednodušené modelování distribuce toku

    Tato diplomová práce se zaměřuje na modelování proudění tekutiny v paralelních distribučních systémech, kde hraje důležitou roli rovnoměrnost distribuce tekutin. Pro tento účel je vytvořen vlastní CFD kód. Kód je napsán v programovacím jazyce Java a používá ke zlepšení výkonu knihovny třetích …

    brno-tech Repository record for Zjednodušené modelování distribuce toku (opens in a new tab)

  16. Analysis of microscale flows in tissue engineering systems and microfluidic devices

    … in this thesis has focused on the study of microflows in Tissue Engineering (TE) scaffolds and microdevices. The thesis is organized in two parts. In the first part, the properties influencing mass transport through scaffold are investigated both experimentally and in silico. In detail: (1) an …

    poli-torino Repository record for Analysis of microscale flows in tissue engineering systems and microfluidic devices (opens in a new tab)

  17. Dispoziční řešení obrobny vyrábějící hřídelovou součást

    Diplomová práce se zabývá návrhem obrobny k výrobě součásti hřídelového tvaru. Pro návrh obrobny je potřeba získat informace z výrobního postupu a výkresu. Tyto informace, společně s množstvím vyrobených kusů na rok a norem času pro každou obráběcí operaci, umožní provedení návrhu. V prvním kroku …

    brno-tech Repository record for Dispoziční řešení obrobny vyrábějící hřídelovou součást (opens in a new tab)

  18. Mejora de la eficiencia energética de sistemas de climatización mediante enfriamiento evaporativo

    … classified as a mechanical forced draft, counterflow-parallel flow cooling tower. For this reason, the influence of the analysis method (Merkel and Poppe) and the arrangement of flow between the water and air streams (counterflow, parallel flow, and counterflow/parallel flow) on the tower's …

    upc-spain Repository record for Mejora de la eficiencia energética de sistemas de climatización mediante enfriamiento evaporativo (opens in a new tab)