Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 182 for “"flow channels"”.

  1. High latitude ionospheric flow channels: effects on polar and subauroral region dynamics

    … of this dissertation is the investigation of flow channel effects on ionospheric dynamics, specifically within the polar and sub-auroral regions. In the polar region, the dynamics are heavily influenced by magnetic reconnection, convection, and particle precipitation, with polar cap patches …

    bu Repository record for High latitude ionospheric flow channels: effects on polar and subauroral region dynamics (opens in a new tab)

  2. Improving polymer electrolyte fuel cell performance through optimizing flow channels and catalyst layers

    … numerical investigations aimed at optimizing the flow channel configuration and the microstructure of the catalyst agglomerate, with the ultimate goal of enhancing fuel cell performance and cost-effectiveness.

    whiterose Download PDF for Improving polymer electrolyte fuel cell performance through optimizing flow channels and catalyst layers (opens in a new tab)

  3. WATER TRANSPORT THROUGH POROUS MEDIA AND IN FLOW CHANNELS OF PROTON EXCHANGE MEMBRANE FUEL CELL

    … the path of reactants passing through the gas channels and/or gas diffusion layer (GDL). This deteriorates the performance of the cell and eventually can cease the operation of the cell. Water transport in PEM fuel cell has been the subject of this PhD study. Water transport on the surface of …

    mtu Repository record for WATER TRANSPORT THROUGH POROUS MEDIA AND IN FLOW CHANNELS OF PROTON EXCHANGE MEMBRANE FUEL CELL (opens in a new tab)

  4. Study of two-phase flow pressure drop characteristics in Proton Exchange Membrane (PEM) fuel cell flow channels of different geometries

    … The buildup of liquid water within the gas flow channels creates distinct two-phase flow patterns. These two-phase flow patterns lead to a pressure drop across the channel by creating resistance to the flow of reactants. The accurate prediction of liquid and gas two-phase flow in PEM fuel …

    mtu Repository record for Study of two-phase flow pressure drop characteristics in Proton Exchange Membrane (PEM) fuel cell flow channels of different geometries (opens in a new tab)

  5. Design of a 300cm2 PEMFC stack with force and CFD simulation to optimize flow channels, gasket design, and clamping forces.

    … same inlet pressure of 5 psi increases the mass flowrate by 54% . The analysis of the endplates with embossments shows an improvement in the uniformity of the forces applied to the fuel cell. This is visible by the stress contour plots of each design, which shows that the forces move from the …

    louisville Repository record for Design of a 300cm2 PEMFC stack with force and CFD simulation to optimize flow channels, gasket design, and clamping forces. (opens in a new tab)

  6. Effects of Manufacturing Induced Features on Damage Evolution in Carbon-Fibre Epoxy Composite Laminates

    … moulding (HP-RTM). The integration of resin flow channels into HP-RTM moulds assists with production of complex parts by reducing total flow resistance, decreasing filling time and guiding the resin through the mould. This research aimed to identify the effects of local geometric features, …

    auckland-ms Repository record for Effects of Manufacturing Induced Features on Damage Evolution in Carbon-Fibre Epoxy Composite Laminates (opens in a new tab)

  7. Automated Design of Additive Manufactured Flow Components

    … the potential of additive manufacturing (AM) for flow components. Examples include nozzles, flow distributors, hydraulic manifolds, and heat exchangers. Compared to conventional manufacturing methods, such as milling and drilling, AM offers a high degree of design freedom and enables the …

    ethz Repository record for Automated Design of Additive Manufactured Flow Components (opens in a new tab)

  8. Shape design optimization of parametric flume sections.

    … surface flume sections. Flume sections or flow channels have been used widely in many areas such as water chutes in civil and agricultural engineering and water slides and bob sled tracks in the recreational and sports fields. Designing such a flow channel in a CAD environment can provide …

    oklahoma-thes Repository record for Shape design optimization of parametric flume sections. (opens in a new tab)

  9. Determination of Two-Phase Flow Parameters for Nuclear Fuel Channels using a Real-Time Neutron Radiography Method

    <p>Multi-dimensional modelling of two-phase flow requires accurate constitutive relationships for interfacial parameters such as interfacial heat transfer, void fraction distribution, interfacial area, etc. However, existing diagnostic systems for measurement of two-phase flow parameters have …

    mcmaster Repository record for Determination of Two-Phase Flow Parameters for Nuclear Fuel Channels using a Real-Time Neutron Radiography Method (opens in a new tab)

  10. Experimental Demonstration of Multiport Multifrequency Power Systems

    … complicated and thus makes the power flow management challenging. The integration of these power electronics converters could be an appropriate solution to simplify the power flow management and enhance the controllability of the system. In this research, a novel multiport …

    tamu Repository record for Experimental Demonstration of Multiport Multifrequency Power Systems (opens in a new tab)

  11. Microfluidic study of end-point relative permeability change after polymer injections

    … Due to the high viscosity of polymer solutions, flows after polymer injection are often subjected to significant permeability impairment. The permeability loss is attributed to polymer trapped inside porous medium that traditionally has been characterized by effluent fluid analysis and pressure …

    colo-mines Repository record for Microfluidic study of end-point relative permeability change after polymer injections (opens in a new tab)

  12. Flow and Mass Transport for Polymer Electrolyte Membrane Electrolyzers

    … mass transport losses. In this thesis, two-phase flow in the PTL and flow channels were investigated via experimental and numerical techniques to inform new designs and optimize operating conditions. The effect of gas compressibility on displacement behaviour in the PTL was elucidated by studying …

    toronto-retro Repository record for Flow and Mass Transport for Polymer Electrolyte Membrane Electrolyzers (opens in a new tab)

  13. FLOW CONTROL CHANNEL INSTRUMENTATION DESIGN AND MODELING

    … corner leakage, and boundary layer separation flow over the rotor blades. With the fluctuation of static pressure, a self-recirculating flow channel can help increase the stall margin while still maintaining efficiency. To better visualize air flow in the recirculation passage, instrumentation …

    nps Repository record for FLOW CONTROL CHANNEL INSTRUMENTATION DESIGN AND MODELING (opens in a new tab)

  14. Surface Wettability Impact on Water Management in PEM Fuel Cell

    … gas diffusion layer (GDL) and cathode gas flow channels. This results in a negative impact on water management and the overall cell performance. Liquid water generated in the cathode catalyst layer and the water moved from anode to cathode side due to electro-osmotic drag transport through …

    waterloo Repository record for Surface Wettability Impact on Water Management in PEM Fuel Cell (opens in a new tab)

  15. Field Validation of LiDAR-based Predictions of Riparian Buffer Zones

    … (LiDAR) provides a way to locate where water is flowing through a channel into an RBZ and then into a stream. The objectives of this study were to characterize riparian buffer zones around Lake Issaqueena, SC and streams flowing into the lake by channel presence: ephemeral, intermittent, and …

    clemson Repository record for Field Validation of LiDAR-based Predictions of Riparian Buffer Zones (opens in a new tab)

  16. Development of radial flow channel for improved water and gas management of cathode flow field in polymer electrolyte membrane fuel cell

    This thesis presents an innovative radial flow field design for PEMFC cathode flow plates. This new design, which is in the form of a radial field, replaces the standard rectangular flow channels in exchange for a set of flow control rings. The control rings allow for better flow distribution and …

    ubc Repository record for Development of radial flow channel for improved water and gas management of cathode flow field in polymer electrolyte membrane fuel cell (opens in a new tab) Download PDF for Development of radial flow channel for improved water and gas management of cathode flow field in polymer electrolyte membrane fuel cell (opens in a new tab)

  17. Using Synchrotron Based X-Ray Imaging Technique to Understand Liquid Water Transport Phenomena in Proton Exchange Membrane (PEM) Fuel Cells

    … pathways of gas diffusion layer (GDL) to gas flow channels. In flow channels, liquid water emerges in the form of droplets, growing to a critical size and becoming unstable. After detachment of unstable droplets, various gas-liquid flow patterns might occur alone or simultaneously along the …

    sask Repository record for Using Synchrotron Based X-Ray Imaging Technique to Understand Liquid Water Transport Phenomena in Proton Exchange Membrane (PEM) Fuel Cells (opens in a new tab)

Page 1 of 10