Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 156 for “"flow profile"”.

  1. Interpretation of Array Production Logging Measurements in Horizontal Wells for Flow Profile

    … of production logging in multi-phase flow wells is challenging, especially for highly deviated wells or horizontal wells. Flow regime-dependent flow conditions strongly affect the measurements of production logging tools. Segregation and possible back flow of denser phases result in …

    tamu Repository record for Interpretation of Array Production Logging Measurements in Horizontal Wells for Flow Profile (opens in a new tab)

  2. Development of Specialized Laser Doppler Velocimeters for High Resolution Flow Profile and Turbulence Spectral Measurements

    … are always in need of innovative instruments for flow velocity measurements. An ideal instrument would be non-intrusive, have a very fine spatial resolution as well as a very fine temporal resolution, be able to measure three-components of velocity, and be compact. Through recent advancements, …

    vt Repository record for Development of Specialized Laser Doppler Velocimeters for High Resolution Flow Profile and Turbulence Spectral Measurements (opens in a new tab)

  3. Hyaluronan synthase 2 and hyaluronan in endothelial cells are increased by shear stress via the PI3-kinase-Akt-pathway with the most pronounced effect by an atheroprotective flow profile

    … reduced at vessel sites with disturbed blood flow and low shear stress. Removal of hyaluronan by treatment with hyaluronidase results in a reduction of the ESL to less than 0.1 μm thick and impaired vessel dilatation properties. Recently, studies showed that distinct shear stress conditions …

    fu-berlin Repository record for Hyaluronan synthase 2 and hyaluronan in endothelial cells are increased by shear stress via the PI3-kinase-Akt-pathway with the most pronounced effect by an atheroprotective flow profile (opens in a new tab)

  4. Investigation of Melt Electrical Conductance in Food Extrusion

    … The specific feeding load, barrel fill and flow profile were affected by the feed rate and the screw speed in opposite directions. Spread of the normalized RTD decreased with increasing feed rate while increasing screw speed broadened RTD due to more mixing. The flow profile in the extruder …

    uiuc Repository record for Investigation of Melt Electrical Conductance in Food Extrusion (opens in a new tab)

  5. Partially Closed Valve Effects on Electromagnetic Flow Meter Accuracy

    … even result in a depleted resource. Generally, flow meters need a flow profile to be fully developed so to optimizemeasurement accuracy. In order to produce accurate measurements, most flow meters require a straight section of pipe immediately upstream of the meter. The straight pipe helps to …

    utahstate Repository record for Partially Closed Valve Effects on Electromagnetic Flow Meter Accuracy (opens in a new tab)

  6. MASS FLOW MEASUREMENT IN THE INLET OF A TRANSONIC AXIAL COMPRESSOR

    … into the test rig to provide more favorable flow conditions for more accurate measurement of the mass flow rate entering the rig. A computational fluid dynamics analysis was conducted using a 3-D model of the inlet of the test rig to obtain a preliminary prediction of the flow profile in the …

    nps Repository record for MASS FLOW MEASUREMENT IN THE INLET OF A TRANSONIC AXIAL COMPRESSOR (opens in a new tab)

  7. Evaluation of Fracture Stimulation Design Based on Downhole Temperature Interpretation

    … are commonly used to diagnose downhole flow conditions. Although the technology allows us to qualitatively confirm the fluid flow profile and other issues occurring downhole during fracturing such as leakage through plugs, for optimizing the fracturing design, we also need to …

    tamu Repository record for Evaluation of Fracture Stimulation Design Based on Downhole Temperature Interpretation (opens in a new tab)

  8. Development of a microfluidic model system to study the response of endothelial cells to pulsatile shear

    … response of endothelial cell to pulsatile shear flow. The chip was manufactured in PDMS consisting of a peristaltic pump with pneumatic actuated microvalves and ‘ventricle’ connected to parallel-plate flow-cells with recirculation. In addition, cell loading, media and reagent replacement was also …

    unsw Repository record for Development of a microfluidic model system to study the response of endothelial cells to pulsatile shear (opens in a new tab)

  9. Nondimensional approach to the design of open channels with spatially varied flow

    … equation is developed which describes the flow profile in rectangular channels with spatially varied flow. This equation is solved for various slopes and rates of discharge. The results show that when the slope and roughness are constant the dimensionless profiles are also constant over a …

    vt Repository record for Nondimensional approach to the design of open channels with spatially varied flow (opens in a new tab)

  10. Subclinical Atherosclerosis Quantified Through Cumulative Shear Measurement

    … Increased surface relative roughness affects the flow profile transition from laminar to turbulent resulting in reduced shear rate. The relationship between the shear stress and the relative roughness was studied using a computer model for fluid flow. A model of the brachial artery was generated …

    calpoly Repository record for Subclinical Atherosclerosis Quantified Through Cumulative Shear Measurement (opens in a new tab)

  11. Modification and Optimization of Conducting Polymer-Modified, Redox-Magnetohydrodynamics (R-MHD) Pumping for Enhanced and Sustained Microfluidics Applications

    … approach is scalable, tunable, generates flat flow profile, and does not require any channels or valves. Pumping performance, such as speed scales with the ionic current density (j) and duration depends on the total charge (Q). The ionic current density (j) results from the conversion of …

    arkansas Repository record for Modification and Optimization of Conducting Polymer-Modified, Redox-Magnetohydrodynamics (R-MHD) Pumping for Enhanced and Sustained Microfluidics Applications (opens in a new tab)

  12. Effect of Surface Finish on Boiling Heat Transfer at Stagnation Point under Free Liquid Jet Impingement

    … higher jet velocities which is attributed to the flow profile.</p> <p>For jet velocities lower than 2 m/s, the surface with higher <strong>Ra </strong>was found to have a delayed Onset of Nucleate Boiling ONB, higher Burn out Heat Flux BOF, and lower rate of heat transfer in the single phase …

    mcmaster Repository record for Effect of Surface Finish on Boiling Heat Transfer at Stagnation Point under Free Liquid Jet Impingement (opens in a new tab)

  13. An experimental investigation of the effects of swirling and pulsing the flow through an axisymmetric duct

    It is known that the presence of swirl in a flow stream can affect heat and mass transfer rates, and pulsatile flow has important aspects in physiological studies and in non-steady turbulent flows. This investigation consisted of an experimental study of the generation and decay of swirling flow in …

    nps Repository record for An experimental investigation of the effects of swirling and pulsing the flow through an axisymmetric duct (opens in a new tab)

  14. Modeling and Optimization of Self-Healing Polymers

    … studies, an ultimate aim is to predict the flow and macroscopic wound closures in polymeric materials. Corresponding numerical simulations to experimental results are presented, utilizing two mathematical models that describe bulk or layer flow. An optimization routine for this self-healing …

    clemson Repository record for Modeling and Optimization of Self-Healing Polymers (opens in a new tab)

  15. Production Log Analysis and Statistical Error Minimization

    … methods and minimize the errors in interpreted profiles with statistical methods. After the investigation of all available standard production log interpretation methods, a new interpretation method for determining oil-water flow profiles was developed with temperature and flowmeter logs. Mass …

    texas Repository record for Production Log Analysis and Statistical Error Minimization (opens in a new tab) Restricted access

  16. Predicting Flow in Firebrand Pile using Pore Network Model

    … an in-depth understanding of heat transfer and flow profile within the firebrand pile. Modeling the firebrand pile as a fibrous porous medium, this study identified a porosity-permeability correlation that accurately describes the transport properties of a firebrand pile. The conduction-based …

    vt Repository record for Predicting Flow in Firebrand Pile using Pore Network Model (opens in a new tab)

  17. An Analytical Approach to Utilize Temperature and Pressure Profile of a Multi-zone Well in Estimating Zonal Flow Contributions

    … world face a major challenge in estimating zonal flow contributions in wells with multiple pay zones. This study develops an analytical approach that estimates zonal flow contributions from producing zones using the pressure and temperature profiles of the well. Such a method can assist operators …

    tamu Repository record for An Analytical Approach to Utilize Temperature and Pressure Profile of a Multi-zone Well in Estimating Zonal Flow Contributions (opens in a new tab)

  18. Development and Evaluation of an Improved Microbial Inactivation Model for Analyzing Continuous Flow UV-LED Air Treatment Systems

    … inactivation model for analyzing continuous flow UV-LED air treatment systems and use of the model to evaluate the impact of several treatment system design parameters on inactivation. Model development includes three submodels: a radiation submodel, a fluid flow submodel, and an inactivation …

    byu Repository record for Development and Evaluation of an Improved Microbial Inactivation Model for Analyzing Continuous Flow UV-LED Air Treatment Systems (opens in a new tab) Download PDF for Development and Evaluation of an Improved Microbial Inactivation Model for Analyzing Continuous Flow UV-LED Air Treatment Systems (opens in a new tab)

  19. Microfluidics Guided by Redox-Magnetohydrodynamics (MHD) for Lab-on-a-Chip Applications

    … the important microfluidic features of flat flow profile and fluid circulation. MHD is driven by the body force, FB = j × B, which is the magnetic part of the Lorentz force equation, and its direction is given by the right hand rule. The ionic current density, j, was generated in an equimolar …

    arkansas Repository record for Microfluidics Guided by Redox-Magnetohydrodynamics (MHD) for Lab-on-a-Chip Applications (opens in a new tab)

  20. PARTICLE IMAGE VELOCIMETRY MEASUREMENTS OF THE TOTAL CAVOPULMONARY CONNECTION WITH CIRCULATORY FLOW AUGMENTATION

    … in the inferior vena cava (IVC). Fluid velocity profiles were examined under various physiologic conditions for Fontan patients. The velocity profiles for all cases demonstrated the shunting of flow from the IVC toward the right pulmonary artery. A rotational component in the pump outflow was …

    vcu Repository record for PARTICLE IMAGE VELOCIMETRY MEASUREMENTS OF THE TOTAL CAVOPULMONARY CONNECTION WITH CIRCULATORY FLOW AUGMENTATION (opens in a new tab)

Page 1 of 8