Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"flow regime map"”.
-
Probabilistic Flow Regime Map Modeling of Two -Phase Flow
… tubes using a common probabilistic two-phase flow regime basis. Probabilistic two-phase flow maps are experimentally developed for R134a at 25°C, 35°C, and 50°C, R410A at 25°C, mass fluxes from 100 to 600 kg/m2-s, qualities from 0 to 1 in 8.00 mm, 5.43 mm, 3.90 mm, and 1.74 mm …
-
A Study on the Hydrodynamic Behavior of a Slot-Rectangular Spouted Bed using CFD
… contact, a better understanding of the complex flow field of granular solids is required. The recognition of flow regimes is also very important in the application of spouted beds. In this thesis, numerical modeling using FLUENT 6.3 commercial software was utilized to study the flow in a …
-
Mean-Field Free-Energy Lattice Boltzmann Method for Liquid-Vapor Interfacial Flows
… numerical development to simulate liquid-vapor flows and the applications to microchannels. First, we obtain a consistent non-local pressure equation for simulating liquid-vapor interfacial flows using mean-field free-energy theory. This new pressure equation is shown to be the general form of …
-
Two-phase flow in a mini-size impacting tee junction with a rectangular cross-section
… conducted in order to investigate the two-phase-flow phenomena in a mini-size, horizontal impacting tee junction. The test section was machined in an acrylic block with a rectangular cross-section of 1.87-mm height × 20-mm width on the inlet and outlet sides. Air-water mixtures at 200 kPa (abs) …
-
FLOW REGIME DRIVEN THERMAL ENHANCEMENT IN INTERNALLY-GROOVED TUBES
… performance to new applications. The success of regime-based heat transfer correlations for smooth tubes has motivated the current effort to explore the relationship between flow regimes and enhanced heat transfer in internally-grooved tubes. In this thesis, a detailed analysis of smooth and …
-
STUDY OF THREE-PHASE AIR-BRINE-SALT COUNTERFLOW IN AN INCLINED PIPE
Gas-liquid-solid counterflow (GLSCF) in inclined pipes occurs in various industrial processes, including oil and gas production and desalination systems. This thesis presents an experimental investigation of GLSCF in a 2-inch pipe inclined at 30°, utilizing air, saturated brine, and salt particles. …
-
Performance and flow regimes in plane 2-D diffusers with exit channels at low Reynolds numbers
A numerical study on laminar incompressible flows in 2-D straight walled diffusers in the low Reynolds number regime (105-1048) is presented to investigate performance and various flow regimes that might exist. Tail channels are situated downstream the diffusers. Geometries with area ratios AR=1.15 …
-
CHARACTERISTICS INVESTIGATION AND PARAMETRIC STUDY OF FLOW BOILING IN MICROGAP HEAT SINK
Flow boiling in microgap offers several advantages, such as extremely high heat transfer rate in compact space with a smaller coolant flow rate, greater temperature uniformity across the heat sink and ease of fabrication and implementation. The objectives of this investigation on flow boiling in …
-
High-Speed Ultrasonic Pulse-Echo System for Two-Phase Flow Measurement
<p>Two-phase gas-liquid flow in pipes is of great practical importance in the nuclear and petroleum industries, etc. Currently, in thermalhydraulic analysis which requires modelling of a two-phase flow medium, such as boiling liquids, condensing vapors, etc., a variety of computer codes are …
-
Zero gravity two-phase flow regime transition modeling compared with data and relap5-3d predictions
This thesis compares air/water two-phase flow regime transition models in zero gravity with data and makes recommendations for zero gravity models to incorporate into the RELAP5-3D thermal hydraulic computer code. Data from numerous researchers and experiments are compiled into a large database. A …
-
Experimental investigations of a semi-batch Taylor vortex reactor using hexane and water
… better understand the canonical Taylor-Couette flow when multiple phases are involved.</p> <p>Using two immiscible liquids, hexane and water, in the semi-batch TV system, droplet patterns were identified in the system in order to create a flow regime map. The regime map identified four unique …
-
Development of capacitive sensor to determine void fraction in horizontal and vertical tubes
This study first presents flow regimes and void fraction in horizontal and vertical tubes with R134a in the adiabatic condition and low mass flux range. Visualization results of horizontal flow patterns are compared to Wojtan-Ursenbacher-Thome flow regime map and have a good agreement. Both void …
-
Mass Transfer and Shear Stress at the Wall for Cocurrent Gas-Liquid Flows in a Vertical Tube
… obtaining the wall shear stress in a two-phase flow, by measuring the mass transfer coefficient at the wall with the electrochemical method, has been completed.</p> <p> The experiments involved the measurement of flow rates, pressure drops, void fractions and mass transfer coefficients, for a …
-
Gas-Liquid Flows in Vertical Annular Channels
… studies of air bubbles rising in stagnant and flowing water in vertical annular channels for the full range of eccentricity (e) were performed. The experiments were conducted in a specially designed experimental facility and two video cameras were used to record the flow from two directions …
-
Experimental studies of Marangoni convection with buoyancy in simple and binary fluids
The flow in a layer of volatile fluid driven by a horizontal temperature gradient is a fundamental transport model for numerous evaporative passive cooling applications. When a thin film of a volatile liquid is subject to a horizontal temperature gradient, changes in the surface tension at the free …
-
Convection and Flow Boiling in Microgaps and Porous Foam Coolers
… mass fluxes and the results are projected onto a flow regime map. Infrared (IR) thermography is used to explore the two-phase characteristic of FC-72 inside the channel instantaneously. Also the single and two-phase heat transfer and pressure drop of porous metal foam which can enhance the cooling …
-
Investigation of Multiphase Cutting Transport in Nearly Horizontal Well Using Pressure Drop, Visualization and Electrical Resistance Tomography Techniques.
… and gas industry, several forms of multiphase flow are encountered, including solid-liquid, gas-liquid, and solid-liquid-gas three-phase flows. Inadequate hole cleaning in an annulus during solid-liquid slurry flow results in several complications. The literature, on the other hand, indicates a …
-
Mass transfer measurements for syngas fermentation
… the data well, but, in general, is dependant on flow regime and the vessel size. The volumetric mass transfer coefficient (k[Subscript L]a) is correlated on the basis of the relative dispersion parameter (N/N[Subscript CD]) for similar impeller hydrodynamics and operating regimes. A stirred-tank …
-
A STUDY OF AIR-OIL TWO-PHASE FLOW IN A HORIZONTAL STRAIGHT PIPE
<p>Air-oil flows are found in many industrial applications, including lubrication systems for high-speed machining and jet engines. Understanding the interaction of the two phases, and the effect flow characteristics have on pressure drop, are important to design lubrication systems. Applying …
-
A study on two-phase flow characteristics in cross-linked microchannel heat sinks
… Obtaining heat sink designs with uniform flow distribution is strongly desired. Mal-distribution in a standard straight microchannel heat sink has become a problematic issue in this research area. A cross-linking scheme, introduced in the channel core promises an appropriate solution to …
Page 1 of 2