Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"fluid flow analysis"”.

  1. Fluid flow analysis of diluted evaporating American whiskey droplets.

    … collapse (via dynamic pressure), (4) bulk fluid evaporation caused monolayer collapse (via reduction of surface area), where the web-like structures reside on the surface, and finally, (5) web-like structures deposit on the substrate. The webs imaged via SEM had a striking resemblance to …

    louisville Repository record for Fluid flow analysis of diluted evaporating American whiskey droplets. (opens in a new tab)

  2. Multi-Scale Fluid Flow Analysis of the Cardiovascular System

    … is a procedure to generate a harmonic blood flow in single functioning ventricle patients has been executed to palliate HLHS patients. In this operation, the inferior vena cava (IVC) and the superior vena cava (SVC), carrying the low-oxygenated blood returning from the lower and upper body …

    embry-riddle Repository record for Multi-Scale Fluid Flow Analysis of the Cardiovascular System (opens in a new tab)

  3. Heat and fluid flow analysis in a molten CuCl heat exchanger

    … thesis presents a new model that predicts the fluid flow and heat transfer in a direct contact heat exchanger, designed to recover the heat from molten CuCl, through the physical interaction between CuCl droplets and air. Numerical results for the variations of temperature, velocity, heat …

    uoit Repository record for Heat and fluid flow analysis in a molten CuCl heat exchanger (opens in a new tab)

  4. Computational Fluid Flow Analysis of the Enhanced-Once through Steam generator Auxiliary feedwater system

    … steam generator (OTSG) is a single pass counter flow heat exchanger in which primary pressurized water from the core is circulated. Main Feedwater is injected in an annular gap on the outer periphery of the steam generator shroud such that it aspirates steam to preheat the feedwater to saturation …

    vt Repository record for Computational Fluid Flow Analysis of the Enhanced-Once through Steam generator Auxiliary feedwater system (opens in a new tab)

  5. Heat transfer, fluid flow analysis and energy management of micro-channel heat sinks using vortex generators and nanofluids

    … and the replacement of water coolant by nanofluids. Preliminary investigation of a perforated pinned heat sink shows that geometrical enhancement strategies proven for air-cooled systems do not necessarily work well with liquid coolant. However, simple solid cylindrical or prismatic vortex …

    whiterose Download PDF for Heat transfer, fluid flow analysis and energy management of micro-channel heat sinks using vortex generators and nanofluids (opens in a new tab)

  6. Characterization of Biomaterials for Regenerative Medicine via Computational Fluid Flow Analysis of Dynamic Contrast Enhanced – Magnetic Resonance Imaging (DCE-MRI) Images

    … of biomaterials that can be characterized is fluid flow through the biomaterials. This is important because adequate transport of oxygen, nutrients, waste, and soluble factors are required for cell proliferation and survival.[1] Biomaterials can be characterized based on their chemical, …

    vt Repository record for Characterization of Biomaterials for Regenerative Medicine via Computational Fluid Flow Analysis of Dynamic Contrast Enhanced – Magnetic Resonance Imaging (DCE-MRI) Images (opens in a new tab)

  7. NON-NEWTONIAN POWER-LAW FLUID FLOW IN ECCENTRIC ANNULI: CFD SIMULATION AND EXPERIMENTAL STUDY

    … of theoretical and numerical studies of fluid flow in an eccentric annulus is mainly due to the required coordinate systems. CFD modeling provides an alternative approach of investigating fluid flow in such complex geometries. The CFD technique emerged as a result of the current increase …

    oklahoma-thes Repository record for NON-NEWTONIAN POWER-LAW FLUID FLOW IN ECCENTRIC ANNULI: CFD SIMULATION AND EXPERIMENTAL STUDY (opens in a new tab)

  8. NON-NEWTONIAN POWER-LAW FLUID FLOW IN ECCENTRIC ANNULI: CFD SIMULATION AND EXPERIMENTAL STUDY

    … of theoretical and numerical studies of fluid flow in an eccentric annulus is mainly due to the required coordinate systems. CFD modeling provides an alternative approach of investigating fluid flow in such complex geometries. The CFD technique emerged as a result of the current increase …

    oklahoma-thes Repository record for NON-NEWTONIAN POWER-LAW FLUID FLOW IN ECCENTRIC ANNULI: CFD SIMULATION AND EXPERIMENTAL STUDY (opens in a new tab)

  9. CONTINUED MODERNIZATION OF THE NPS TRANSONIC COMPRESSOR TEST RIG

    … using Solidworks and conducted structural and fluid flow analysis of rotating parts using ANSYS Workbench and will be used to move toward further development, manufacturing and testing of the new rig.

    nps Repository record for CONTINUED MODERNIZATION OF THE NPS TRANSONIC COMPRESSOR TEST RIG (opens in a new tab)

  10. Automatic mesh representation of urban environments

    … based on the requirements of Environmental Fluids Dynamics Code (EFDC) model – a popular modeling platform for environmental fluid flow analysis. The resulting mesh generated is watertight with little human intervention and can serve as a significant preprocessing tool in environmental …

    utc Repository record for Automatic mesh representation of urban environments (opens in a new tab)

  11. Modeling and Analysis of an In-line Pump Jet Thruster for Swimming Robots

    … in modeling of a thruster is that axial flow velocity is an unmeasurable state, yet the model depends on that variable. This work addresses this difficulty. It explores the dynamics of in-line pump jet thrusters which are used for underwater robotic actuation. This work uses impeller …

    rice Repository record for Modeling and Analysis of an In-line Pump Jet Thruster for Swimming Robots (opens in a new tab)

  12. Effect of Ballast Pockets on the Stability of Railway Embankments

    … method to conduct a coupled deformation and pore fluid flow analysis for slope stability evaluation under undrained conditions. The control variable method is used to perform a series of parameter studies, including geometric characteristics of the slope, railway embankment and ballast pockets, …

    concordia Download PDF for Effect of Ballast Pockets on the Stability of Railway Embankments (opens in a new tab)

  13. Finite element analysis of fluid induced fracture behaviour in oilsand

    … of oil from Oilsand deposits at depth, rely on fluid induced fracturing of Oilsand. A method of analysis for predicting the initiation and propagation of fractures in Oilsand has been developed. The prediction of fracture initiation involves a stress analysis of the domain. Analysis of fracture …

    ubc Repository record for Finite element analysis of fluid induced fracture behaviour in oilsand (opens in a new tab) Download PDF for Finite element analysis of fluid induced fracture behaviour in oilsand (opens in a new tab)

  14. MODELING THE COOLING PHASE OF THE LENS MOLDING PROCESS

    … in the model by coupling a computational fluid dynamics analysis of the flow of nitrogen through the system and a transient heat transfer finite element analysis of the assembly. An iterative process between the fluid flow analysis and the thermal analysis is used to account for their …

    clemson Repository record for MODELING THE COOLING PHASE OF THE LENS MOLDING PROCESS (opens in a new tab)

  15. Development of a three-dimensional multi-scale model to study the formation of solidification defects in fusion welding,

    … modules: 1) Solidification, 2) Deformation, 3) Fluid flow, and 4) Defect formation. The solidification module numerically reconstructs the 3-D microstructure of semisolid welds using a granular model of solidification. Specifically, a modified Voronoi tessellation algorithm is used to generate …

    ubc Repository record for Development of a three-dimensional multi-scale model to study the formation of solidification defects in fusion welding, (opens in a new tab) Download PDF for Development of a three-dimensional multi-scale model to study the formation of solidification defects in fusion welding, (opens in a new tab)

  16. PERFORMANCE OF A NEAR SHORE OSCILLATING WAVE SURGE CONVERTER WITH VARIABLE FLAP CONFIGURATIONS

    … wave energy converter simulation tool, and a fluid flow analysis of the 2-vane OWSC in standard and energetic sea states using computational fluid dynamics (CFD). It was hypothesized that opening the vane angles would significantly and consistently reduce the OWSC's hydrodynamic response to …

    ecu Repository record for PERFORMANCE OF A NEAR SHORE OSCILLATING WAVE SURGE CONVERTER WITH VARIABLE FLAP CONFIGURATIONS (opens in a new tab)

  17. A high-fidelity approach to conceptual design

    … a new methodology to perform conceptual design analysis on aircraft, using off-the-shelf, high-fidelity software tools to explore the project design space, including important preliminary design factors and thereby producing a more robust result which is less subject to compromise at later …

    iastate Repository record for A high-fidelity approach to conceptual design (opens in a new tab)

  18. Thermal Modeling and Imaging of As-built Automotive Parts

    … be done for various applications ranging from fluid flow analysis to complex thermal management of components. This thesis describes the method and necessary requirements for thermal modeling of automotive parts. Simulation of under hood and under vehicle automotive poses several challenges, …

    ut-knoxville Repository record for Thermal Modeling and Imaging of As-built Automotive Parts (opens in a new tab)

  19. Laser Surface Structuring of Alumina

    … of surface grains is provided based on detailed analysis of surface micro-texture. Due to complexity of microstructure formed during laser surface structuring, a fractal analysisbased approach is suggested to characterize surface microstructures. Detailed analysis of the effects of laser …

    utk-theses Repository record for Laser Surface Structuring of Alumina (opens in a new tab)

  20. Fault Seal Analysis for CO2 Storage: Fault Zone Architecture, Fault Permeability, and Fluid Migration Pathways in Exposed Analogs in Southeastern Utah

    … 1) upwards migration and leakage of injected fluids along natural fault and fracture networks, and 2) possible induced seismicity (earthquakes) resulting from increasing the pressure in reservoirs and along existing faults. We use geologic field mapping, petrographic analysis, characterization …

    utahstate Repository record for Fault Seal Analysis for CO2 Storage: Fault Zone Architecture, Fault Permeability, and Fluid Migration Pathways in Exposed Analogs in Southeastern Utah (opens in a new tab)

Page 1 of 2