Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"flume tests"”.
-
A prediction of meander migration based on large-scale flume tests in clay
… none of them are based on the physical model tests on a specific type of soil. A total of eight flume tests are conducted to develop a prediction equation of meander migration in clay. The test results of migration rate follow a hyperbolic function, and spatial distribution of the maximum …
-
Experimental Study of Bridge Scour in Cohesive Soil
… pier scour depth and the maximum abutment using flume test results. The equations are basically composed with the difference between the local Froude number and the critical Froude number. Because the scour happens when the shear stress is bigger than the critical shear stress, which is the …
-
Experimental Study and Surface Deposition Modelling of Amended Oil Sands Tailings Products
… deposition rate dependent behaviour seen in flume tests. The geometry of tailings in flume tests with relatively slow deposition is affected by the behaviour of earliest deposited tailings, which appear to have recovered structure sufficiently to manifest a large yield stress. This yield …
-
Influence of Initial State on Runout in Flume Experiments on Remoulded Leda Clay
… failure and runout. A large database of flume tests, with a range of residual and peak strengths are generated. The failure and runout from these tests are analyzed using different analytical methods. The comparison of the experiments with the analytical methods show that both residual …
-
Deposition Modelling of High Density Tailings Using Smoothed Particle Hydrodynamics
… experimental data for single and multi-layer flume tests. SPH has the advantage over simpler methods, such as Lubrication Theory, as SPH better predicts the geometry when inertia influences the flow of tailings.
-
Three-Dimensional Effects of Tsunami Impact on Bridges
… test cases were validated by existing data from flume tests to examine capabilities of OpenFOAM in modelling fluid-bridge interactions. Subsequently, three-dimensional models were developed to examine geometric modifications to the bridge including skewness, grading and superelevation of bridge …
-
Modeling of tailings flow following a dam breach using smoothed particles hydrodynamics
… To calibrate the simulation tool a series of flume tests on two different tailings pastes from two different operation stages of Bulyanhulu gold mine (Tanzania) was modeled. The flume was created in the simulation tool and more than so simulations were run to calibrate the simulation tool. …
-
Numerical model for the prediction of total dynamic landslide forces on flexible barriers
… to validate the numerical model, a series of flume tests have been performed where granular material impacts a rigid wall and a flexible rubber barrier. With some calibration, reasonable results are obtained. The model was also used to simulate forces induced during full-scale impacts by back …
-
Innovative structural systems for durable and resilient artificial reefs and other geometrically complex marine constructions
… steel tubes is examined through pushout tests, including concrete pin connectors and long-term seawater exposure. Results indicate that initial bond degradation may be counterbalanced by long-term strength gains associated with corrosion product development at the interface. Hydrodynamic …
-
Modeling and Simulation of Mudflows Impacting Railway Infrastructure Using Smoothed Particle Hydrodynamics
… on hillslope as in the real-world, a series of flume tests were modeled based on the physical large-scale experiment carried out by Bugnion et al. (2010), paved the way for implementation of the case studies' environment and properties of mudflow in the simulation tool in order to be modeled. …
-
LAGRANGIAN BEDLOAD MOVEMENT PREDICTION USING THE VIRTUAL VELOCITY APPROACH
… experimental study involved controlled flume tests where spherical particles were transported by the flow on top of a well-packed bed. The moving particles were gravel size and their diameter ranges from 0.43 to 1.35 times the diameter of the bed particles. The sediment transport stage …
-
Contraction scour in compound channels with cohesive soil beds
… soil bed is made by conducting a series of flume tests representing typical field conditions. The effect of the most crucial factors causing contraction scour namely flow velocity, depth of flow and the shape of the abutment is examined. Correction factors are developed for changes in flow …
-
Evaluation of an In Situ Measurement Technique for Streambank Critical Shear Stress and Soil Erodibility
… JTD and determine how it compares to traditional flume studies. To evaluate the repeatability, a total of 21 jet tests were conducted on two remolded soils, a clay loam and clay, compacted at uniform moisture content to a bulk density of 1.53 g/cm^3 and 1.46 g/cm^3, respectively. To determine the …
-
Pore Pressure Dissipation and Reconsolidation Observed in Large Scale Experiments of Liquefied Debris Flows
… We also present results from twelve large-scale flume tests carried out at source volumes of 0.2, 0.4, 0.6, and 0.8 m3 of a well-graded granular material with a consistent water content. Excess pore pressures were observed throughout travel and dissipated following flow arrest. Estimates of the …
-
The SRICOS-EFA method for complex pier and contraction scour
… of scour is based on an equation obtained from flume tests and the initial rate is based on an equation giving the initial shear stress obtained from numerical simulations. The initial scour rate is then read on the Erosion Function Apparatus (EFA) erosion function curve at the corresponding …
-
Experimental and Analytical Study of Helical Cross-Flow Turbines for a Tidal Micropower Generation System
… were fabricated and tested in a water flume capable of flow rates up to 0.8 m/s. Tests included performance characterization of the rotating turbines from freewheel to stall, static torque characterization as a function of azimuthal angle, performance degradation associated with …
-
Developments in photogrammetric remote sensing for grain-scale fluvial morphology studies
… interaction with flows. Initially, a series of flume tests is presented, which allowed to test, develop and optimise a solution for measuring water-worked gravel beds using digital photogrammetry, a growing technique used in the Earth Sciences. The thesis presents in detail the use and …
-
Evaluation of Cohesive Soil Erosion Parameters
… for erosion assessment have resulted from flume experiments where the flow is surface-parallel. This approach is not appropriate for the JET because the shear stress calculation based on mean flow characteristics diverges from the turbulent measures in the JET. This important aspect has …
-
Measurement of Ground Deformations during Geohazards using Magnetic Trackers
… of rigid blocks. Laboratory experiments, such as flume tests, play a very important role in investigating the involved mechanism since they provide idealised conditions in which each parameter of interest can be studied accordingly. The experiment consists of releasing dry rigid blocks on an …
-
Performance Evaluation of Two Silt Fence Geosynthetic Fabrics During and After Rainfall Event
… of studies involving controlled laboratory flume tests and outdoor tests performed in the field on construction sites with actual monitored storm events. In field tests, due to the random and uncontrollable nature of real storm events and field conditions, studies have shown difficulty in …
Page 1 of 2