Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 62 for “"foamability"”.

  1. Understanding the foamability of complex polymeric systems by using extensional

    Esta tesis se ha centrado en estudiar y entender la capacidad de espumar de diferentes poliolefinas, así como, las propiedades mecánicas de las espumas producidas con este tipo de polímeros. Con esta finalidad se ha utilizado como herramienta la técnica de reología extensional. Por un lado, se ha …

    valladolid Repository record for Understanding the foamability of complex polymeric systems by using extensional (opens in a new tab)

  2. Influence of Additives on the Foamability of Potato Starch based Biopolymers

    … biopolymer as foam-grade materials. To improve foamability, which is largely dependent on melt strength, it is possible to modify hydrolyzed starch based biopolymers by bulk modification with bi- and multi- functional epoxy chain extenders. The modification work was carried out using a twin …

    mcmaster Repository record for Influence of Additives on the Foamability of Potato Starch based Biopolymers (opens in a new tab)

  3. The effect of in situ nanofibrillar structure on the foamability of PLA/Polyester/nanoclay nanocomposites

    Ein gestiegenes Umweltbewusstsein unserer Gesellschaft und unsere zunehmende Abhängigkeit von Kunststoffen, tragen zur Entwicklung biologisch abbaubarer Polymere aus nachhaltigen Ressourcen bei. Damit verbunden sind neue Methoden zur Synthese, Modifizierung und Verarbeitung. Im Rahmen dieser Arbeit …

    bayreuth Repository record for The effect of in situ nanofibrillar structure on the foamability of PLA/Polyester/nanoclay nanocomposites (opens in a new tab)

  4. Comparison of Foaming Properties Between Chelated Reconstituted SMP and Caseinates

    … caseinate, and calcium caseinate solutions. Foamability, foam stability as well as the preferential locations of αs-casein, β-casein and !-casein in their foams were analyzed. It was hypothesized that the foamability, foam stability and the preferential locations of these three caseins in the …

    calpoly Repository record for Comparison of Foaming Properties Between Chelated Reconstituted SMP and Caseinates (opens in a new tab)

  5. Molecular Structure – Processing – Property Relationship in Polypropylene Foams Fabricated using Supercritical CO2

    … It aims to bridge the gap in research linking foamability to upstream material properties without needing additional downstream processes, focusing on the low- and high-temperature regimes. Initial studies identified crystallization temperature and gas diffusivity as key factors in PP …

    toronto-retro Repository record for Molecular Structure – Processing – Property Relationship in Polypropylene Foams Fabricated using Supercritical CO2 (opens in a new tab)

  6. Alternatives to fluorinated firefighting foams

    … did interact with the silica nanoparticles. The foamability of these systems was analysed using a standard Ross-Miles set-up, and foam degradation was measured by looking at the change in foam height over time: this was validated by surface tension measurements. It was found that high …

    bristol Repository record for Alternatives to fluorinated firefighting foams (opens in a new tab) Download PDF for Alternatives to fluorinated firefighting foams (opens in a new tab)

  7. Design Rules for Statistical Copolymer Surfactants for Foam-Forming Applications

    … promising alternatives, offering both superior foamability and a broader range of tuneable structural parameters. Nevertheless, their fundamental macromolecular nature poses significant challenges for their rigorous characterisation and the underlying structure-performance relationships remain …

    whiterose Download PDF for Design Rules for Statistical Copolymer Surfactants for Foam-Forming Applications (opens in a new tab)

  8. Foaming properties of whey protein isolate and [lambda]-carrageenan mixed systems

    … beating the solution using a KitchenAid mixer. Foamability and foam stability were determined by measuring the foam overrun and drainage 1/5 life, respectively. Foam rheological properties were determined using a Kinexus Pro Rheometer, while foam microstructures were visualized by confocal laser …

    missouri Repository record for Foaming properties of whey protein isolate and [lambda]-carrageenan mixed systems (opens in a new tab)

  9. Microstructure of Instant Coffee Foam. Confocal Microscopy Method Development and Production Related Parameters Affecting Foam Kinetics

    … bubble area to minute zero as a measure of foamability proved viable. Previously reported data of increased foamability in the pH range of 5.7-6.3 was confirmed. The results showed that higher pH values (>pH 5.0) had a negative impact on foam stability, and a lower pH increased foam …

    chalmers Repository record for Microstructure of Instant Coffee Foam. Confocal Microscopy Method Development and Production Related Parameters Affecting Foam Kinetics (opens in a new tab)

  10. Foaming in Di-Iso propanol amine solutions used in the sweetening of natural gas

    … the organic acids tested did not increase the foamability of DIPA, however n-hexane and 'residue' from degradation products did increase the foamability of DIPA at their tested concentration ranges.

    adelaide Repository record for Foaming in Di-Iso propanol amine solutions used in the sweetening of natural gas (opens in a new tab)

  11. Effect of silica particles on foam stability

    … were used in pure water to generate foam. Foamability and foam stability both increased with increasing concentration of particles. Moderately hydrophobic particles gave optimum foamability whilst no foam could be produced with fully hydrophilic particles. In the foam rheology test, a …

    birmingham Download PDF for Effect of silica particles on foam stability (opens in a new tab)

  12. The Marangoni effect and transient foam stability of low molecular weight polypropylene glycols

    … foam were in good agreement with the trend of foamability with surfactant concentration. The Gibbs elasticity, which is the ability of surfactant to generate a surface tension difference on a bubble surface, was experimentally determined. With this model, parallel relationships were found …

    adelaide Repository record for The Marangoni effect and transient foam stability of low molecular weight polypropylene glycols (opens in a new tab)

  13. EXTRACTION, CHARACTERIZATION AND FUNCTIONAL PROPERTIES OF JOJOBA PROTEINS

    … 4.0. Albumins and globulins showed very good foamability and emulsion properties. The prolamine and glutelin concentrates showed very poor foamability and emulsion properties. The buffering capacity of jojoba protein concentrates was very low.

    arizona-thes Repository record for EXTRACTION, CHARACTERIZATION AND FUNCTIONAL PROPERTIES OF JOJOBA PROTEINS (opens in a new tab)

  14. ΜΕΛΕΤΗ ΦΥΣΙΚΟΧΗΜΙΚΩΝ ΙΔΙΟΤΗΤΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΚΗ ΑΞΙΟΠΟΙΗΣΗ ΤΩΝ ΠΡΩΤΕΙΝΩΝ ΤΩΝ ΣΠΟΡΩΝ ΤΟΥ ΦΥΤΟΥ LUPINUS ALBUS, SSP. GRAECUS

    … OIL ABSORPTION, VISCOELASTICITY, EMULSIFICATION, FOAMABILITY AND EMULSION AND FOAM STABILITY. TECHNOLOGICAL EVALUATION OF LSPI WAS ACHIEVED BY ITS ADDITION TO MEAT PRODUCTS (FRANKFURTER TYPE) IN LEVELS OF UP TO 3%. THE SAUSAGES PRODUCED WITH THE INCORPORATION OF LSPI HAD BETTER PROPERTIES THAN THE …

    greece Repository record for ΜΕΛΕΤΗ ΦΥΣΙΚΟΧΗΜΙΚΩΝ ΙΔΙΟΤΗΤΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΚΗ ΑΞΙΟΠΟΙΗΣΗ ΤΩΝ ΠΡΩΤΕΙΝΩΝ ΤΩΝ ΣΠΟΡΩΝ ΤΟΥ ΦΥΤΟΥ LUPINUS ALBUS, SSP. GRAECUS (opens in a new tab)

  15. Indirect and direct thickening of hydrocarbon liquids as novel hydraulic fracturing and enhanced oil recovery fluids

    … addition of a secondary component may promote foamability or stability. Foaming additives were identified that stabilized foam in 100% diesel during the initial screening. Select additives were also successful in promoting foamability and stability in a n-pentane and crude oil mixture

    texas Repository record for Indirect and direct thickening of hydrocarbon liquids as novel hydraulic fracturing and enhanced oil recovery fluids (opens in a new tab)

  16. Egg white foam : a thesis presented in partial fulfilment of the requirements for the degree of Master of Food Technology at Massey University, Auckland, New Zealand

    … different parameters of foam properties, such as foamability after preparation and foam stability with time after foam preparation. Foam stability was also analysed by two different aspects, foam volume stability against foam collapse and foam liquid stability against liquid drainage. Another …

    massey Repository record for Egg white foam : a thesis presented in partial fulfilment of the requirements for the degree of Master of Food Technology at Massey University, Auckland, New Zealand (opens in a new tab)

  17. Bio-based Surfactants: derived from sugar beet pulp monosaccharides

    … desirable properties such as solubility, foamability and reduced surface tension. In particular, the properties of the developed surfactants from Chapters 2 and 3 are promising for household and personal care products, offering a reduced risk of allergies and toxicity, and improved skin …

    radboud Repository record for Bio-based Surfactants: derived from sugar beet pulp monosaccharides (opens in a new tab) Download PDF for Bio-based Surfactants: derived from sugar beet pulp monosaccharides (opens in a new tab)

  18. Foam as a Vehicle for Nanoparticle Delivery in Unsaturated Porous Media

    … to prepare foaming solutions, and the foamability and foam stability of the generated foams were determined. Steol CS-460 and Bioterge AS-40 were shown to have the highest foamability and foam stability and therefore, were selected for the subsequent experimental efforts. Ammonyx LO was …

    waterloo Repository record for Foam as a Vehicle for Nanoparticle Delivery in Unsaturated Porous Media (opens in a new tab)

  19. CO₂ RESPONSIVE NANOPARTICLES FOR ENVIRONMENTAL AND INDUSTRIAL APPLICATIONS

    … analyzed using analytical centrifugation, while foamability and foam stability were evaluated under CO₂ and N₂ environments using a Dynamic Foam Analyzer (DFA 100). The results demonstrate that surface chemistry, pH, and gas environment are critical parameters influencing interfacial rheology and …

    cornell Repository record for CO₂ RESPONSIVE NANOPARTICLES FOR ENVIRONMENTAL AND INDUSTRIAL APPLICATIONS (opens in a new tab)

Page 1 of 4