Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 52 for “"force/torque sensor"”.

  1. Orthoplanar Spring Based Compliant Force/Torque Sensor for Robot Force Control

    A compliant force/torque sensor for robot force control has been developed. This thesis presents methods of designing, testing, and implementing the sensor on a robotic system. The sensor uses an orthoplanar spring equipped with Hall-effect sensors to measure one component of force and two moment …

    usf Repository record for Orthoplanar Spring Based Compliant Force/Torque Sensor for Robot Force Control (opens in a new tab)

  2. Inexpensive Custom Built 6-Axis Force/Torque Sensor for Suturing Simulator

    … the design of a six degree-of-freedom low-cost force/torque sensing platform for use in a suturing simulator for surgical training. This platform is based on the Stewart Platform configuration in which the linear actuators are replaced with metal wire kept in tension by multiple elastically …

    clemson Repository record for Inexpensive Custom Built 6-Axis Force/Torque Sensor for Suturing Simulator (opens in a new tab)

  3. Design and Analysis of a Customizable 6-DOF Force/Torque Sensor

    … of a novel customizable six-degree-of-freedom force/torque sensor, called the Kustom Force/Torque Sensor (KFTS), for use in the Cal Poly Low Speed Wind Tunnel (LSWT). The KFTS was developed as an alternative to commercial multi-axis force/torque sensors that feature fixed specifications. The …

    calpoly Repository record for Design and Analysis of a Customizable 6-DOF Force/Torque Sensor (opens in a new tab)

  4. Design and developmental studies on a six-degree of freedom endoscopic force/torque sensor

    … on designing a new type of six-degree freedom force/torque sensor and developmental study on it. The proposed sensor can independently detect six components of force and moment on a test platform. The response characteristics are linear, close to the design values, and high enough to measure …

    concordia Download PDF for Design and developmental studies on a six-degree of freedom endoscopic force/torque sensor (opens in a new tab)

  5. Mechanical Redesign and Fabrication of a 12 DOF Orthotic Lower Limb Exoskeleton and 6 Axis Force-Torque Sensor

    … the design and implementation of a six axis force-torque sensor built into the foot of OLL-E. The purpose of this sensor is to provide feedback to the central control system and allow OLL-E to be self-balancing. This foot sensor design is calibrated and initial results are discussed and shown …

    vt Repository record for Mechanical Redesign and Fabrication of a 12 DOF Orthotic Lower Limb Exoskeleton and 6 Axis Force-Torque Sensor (opens in a new tab)

  6. Force Estimation Based Compliance Control of a Two Link Harmonically Driven Robotic Manipulator

    The estimation of external forces exerted on a robotic manipulator with harmonic drive gearing without a force/torque sensor is considered. Manipulator dynamics, together with motor current feedback are used to estimate external joint torques, which are transformed into estimated external end …

    maryland Repository record for Force Estimation Based Compliance Control of a Two Link Harmonically Driven Robotic Manipulator (opens in a new tab)

  7. DORA - Dexterous Robot Assistant Autonomous door opening with a mobile manipulator

    … hinge location by utilizing readings from a force/torque sensor that is located between the arm and the end-effector, and the position of said end-effector. By employing the MoveIt framework, DORA was able to follow that trajectory and successfully open the door. Testing has confirmed that …

    chalmers Repository record for DORA - Dexterous Robot Assistant Autonomous door opening with a mobile manipulator (opens in a new tab)

  8. A study of the polishing process of a turbine blade for automation

    … are done with the help of the Polaris Position Sensor and a JR3 Force-Torque sensor to study the motion and forces required to do the task of polishing turbine blades. The data for both force and motion are gathered while a worker from performs the actual polishing process. This information from …

    nus Repository record for A study of the polishing process of a turbine blade for automation (opens in a new tab) Download file for A study of the polishing process of a turbine blade for automation (opens in a new tab)

  9. Cooperative control of dual arm manipulator

    … has six separate motorized motions with position sensors. The arm has also an end effector and is provided with a six axes Force/Torque sensor. The manipulator is controlled by two TMS320C40 parallel Digital Signal Processors. The control software which is embedded on the Digital Signal Processor …

    unlv Repository record for Cooperative control of dual arm manipulator (opens in a new tab) Download PDF for Cooperative control of dual arm manipulator (opens in a new tab)

  10. Experimental Evaluation of Contact Forces during Activities of Daily Living

    … off-the-shelf tools instrumented with a 6-DOF force/torque sensor, and to enable the robot to perform specific tasks. The first three tasks to be developed and tested are hair brushing, face wiping, and shaving. Two sets of trials were conducted: static trials to extract preliminary force data …

    guelph Repository record for Experimental Evaluation of Contact Forces during Activities of Daily Living (opens in a new tab)

  11. Simulation and real-time control of a seven-degree-of-freedom manipulator

    … manipulators. A JR<sup>3</sup> force/torque sensor and an ultrasonic sensor were integrated to the RRC manipulator for force control and obstacle avoidance, respectively.</p>

    ut-knoxville Repository record for Simulation and real-time control of a seven-degree-of-freedom manipulator (opens in a new tab)

  12. The use of instrumented measures to describe lower extremity joint mechanics

    … A set of instrumented measures consisting of a force/torque sensor and an angle sensor was created to quantitatively assess the mechanics of the lower extremity joints as a possible solution to the low repeatability of commonly used clinical tests. It was shown through the use of instrumentation …

    njit Repository record for The use of instrumented measures to describe lower extremity joint mechanics (opens in a new tab)

  13. Quantifying prehension in persons with stroke post rehabilitation

    … prior to training and after training. Downward force applied to the object during grasping was assessed using Nano17TM, a force/torque sensor system that is added to the reach to grasp test paradigm for the VR trained subjects. Results from total movement time, grasping time, and average applied …

    njit Repository record for Quantifying prehension in persons with stroke post rehabilitation (opens in a new tab)

  14. Ratbot - A Surgical Robotic Solution To Enable Brain-wide Recording In Rodents

    … and intraoperative slot-drilling with real-time force-feedback control. In the planning module, users interact with a Unity-based interface to visualize a 3D reconstruction of multiple probes and skull plate, define target locations, and generate collision-free probe trajectories via a hybrid …

    jhu Repository record for Ratbot - A Surgical Robotic Solution To Enable Brain-wide Recording In Rodents (opens in a new tab)

  15. Autonomous tactile object exploration and estimation using simple sensors

    … (consisting of a trackball mounted to a force/torque sensor on a sliding mechanism) and a fuzzy logic force controller were developed to overcome the difficulties inherent in force control on a stepper motor robot. A Kalman filter based quadric shape estimator was then used to describe …

    vt Repository record for Autonomous tactile object exploration and estimation using simple sensors (opens in a new tab)

  16. Virtual Sensors Applied to a 7-degree-of-freedom Robotic Manipulator for Space Applications

    … of robotic manipulator control is modulating the force and torque at the robot's end-effector to ensure precision wrenching tasks are done to specification; therefore, some form of feedback is required for control. A common way to measure said force and torque is using a 6-axis force-torque sensor …

    mcmaster Repository record for Virtual Sensors Applied to a 7-degree-of-freedom Robotic Manipulator for Space Applications (opens in a new tab)

  17. Deep Reinforcement Learning of Variable Impedance Control for Object-Picking Tasks

    … control framework is proposed to modulate the force exerted by a manipulator for lifting an unknown object, eliminating the need for feedback from a force/torque sensor. The framework utilizes a variable impedance controller to generate the required force, and an admittance controller models …

    clemson Repository record for Deep Reinforcement Learning of Variable Impedance Control for Object-Picking Tasks (opens in a new tab)

  18. Shared control with haptic feedback for robotic-assisted minimally invasive surgery

    … a 7-dof KUKA LWR4+ robotic manipulator with a force/torque sensor (ATI Mini40) attached at its end-effector, a UR5e robot, a Force Dimension Sigma7 haptic device, and two virtual intraoperative environments

    greece Repository record for Shared control with haptic feedback for robotic-assisted minimally invasive surgery (opens in a new tab)

  19. Improved interface for deep venous thrombosis screening using B-mode ultrasound

    … images, and by using information from additional force-torque and location sensors. It is known that deep venous thrombosis (DVT) is a disease that affects the venous system, where blood clots are formed and obstruct the venous pathways, causing serious consequences such as pulmonary embolism. …

    ubc Repository record for Improved interface for deep venous thrombosis screening using B-mode ultrasound (opens in a new tab) Download PDF for Improved interface for deep venous thrombosis screening using B-mode ultrasound (opens in a new tab)

  20. Development of a virtual reality video game using principal component analysis to map isometric force efforts for haptic feedback: A proof of concept

    … The game is played by interacting with a force/torque sensor mounted onto the end effector of the robot and force feedback is given real time as participants aim to match force targets in a lower dimensional space. Preliminary results of a typically developing child indicate lower error …

    uiuc Repository record for Development of a virtual reality video game using principal component analysis to map isometric force efforts for haptic feedback: A proof of concept (opens in a new tab)

Page 1 of 3