Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"force flow"”.

  1. POD based methods for Force & Flow Structure Estimation

    Separated flows arise when boundary layers detach from solid surfaces and form shear layers that roll into vortical structures. These vortices redistribute momentum, amplify pressure fluctuations, and produce unsteady forces that govern the performance and reliability of engineering systems. …

    mcmaster Repository record for POD based methods for Force & Flow Structure Estimation (opens in a new tab)

  2. Strategic Analytical Solving Hueristic for Supply and Force Flow Logistics

    … branches of the III Marine expeditionary forces cell. We discovered that, for the first time, a model could be used in real-time planning to provide leadership with an analytically supported decision-making process, whereas previously the approach was entirely qualitative and based on …

    tamu Repository record for Strategic Analytical Solving Hueristic for Supply and Force Flow Logistics (opens in a new tab)

  3. Helical force flow: a new engineering mechanics model for biological materials

    … and zoology hints to an optimized pathway for force and/or energy transfer. His goal has been to realize an alternative approach to the standard stress analysis used in engineering in order to more efficiently and accurately deal with biological materials. Improved tools for these natural …

    must-thes Repository record for Helical force flow: a new engineering mechanics model for biological materials (opens in a new tab)

  4. Enhanced 3D strut-and-tie method for design of discontinuity regions - Validation of the method through a case study

    … by using the strut-and-tie method, where the force flow in a structure is represented as a truss system. Strut-and-tie models can be set up in three dimensions, however in structural engineering practise today the models are simplified to two dimensions in the calculations. This often results …

    chalmers Repository record for Enhanced 3D strut-and-tie method for design of discontinuity regions - Validation of the method through a case study (opens in a new tab)

  5. The Unfulfilled Promise: The Development of Operational Art in the U.S. Military, 1973-1997

    … operational art based on strategy, campaigning, force flow, and logistics, it traces the development of Active Defense and AirLand Battle in the U.S. Army, the emergence of a culture and doctrine of maneuver warfare in the U.S. Marine Corps, the Air Force's efforts to institute centralized …

    ku Repository record for The Unfulfilled Promise: The Development of Operational Art in the U.S. Military, 1973-1997 (opens in a new tab)

  6. A flexible capacitance sensor integrated micropump for precise volume control

    … system to manipulate the hydrodynamics force, flow speed, and volume per unit time with a wider range of volume control. The embedded flexible capacitance sensor showed great sensitivity and repeatability. With the advantages in adjustable pneumatic pressure and significant improvement …

    ttu Repository record for A flexible capacitance sensor integrated micropump for precise volume control (opens in a new tab)

  7. 3D strut-and-tie design recommendations for column and drilled shaft anchorages in drilled shaft footings

    … of struts and ties to reproduce the internal force flow of the footings. However, a lack of clear design guidelines and experimental verification for the anchorages of the column and drilled shaft reinforcement in drilled shaft footings hinder the practical use of the 3D STM in the design of …

    texas Repository record for 3D strut-and-tie design recommendations for column and drilled shaft anchorages in drilled shaft footings (opens in a new tab)

  8. The geomorphological dynamics of a restored forested floodplain

    … sedimentation and erosion showed that overbank flow scoured the surface and distributed sediment, and rates of erosion and deposition were higher within floodplain channels than elsewhere on the floodplain surface. These channels were therefore a major control over the spatial distribution of …

    soton Download PDF for The geomorphological dynamics of a restored forested floodplain (opens in a new tab)

  9. Development and application of a three-dimensional finite element model of spino-pelvic complex

    … mandatory to reconstruct the continuity of the force flow between the lumbar spine and the pelvis. In only few biomechanical analyses different reconstructions were compared. The aim of the study was to compare four different reconstruction methods after total sacrectomy using a …

    fu-berlin Repository record for Development and application of a three-dimensional finite element model of spino-pelvic complex (opens in a new tab)

  10. Thermal Modeling of Vacuum Assisted Steam Pasteurization for Improved Product Safety of Low Water Activity Foods

    … of the steam condensation process, a system to force flow through the package was incorporated. Single product experimentation was performed in order to develop a conduction model which predicts the product surface temperature using the measured chamber ambient steam temperature. A number of …

    vt Repository record for Thermal Modeling of Vacuum Assisted Steam Pasteurization for Improved Product Safety of Low Water Activity Foods (opens in a new tab)

  11. Wave-Induced Loading of Submerged Core-Loc Armour Units

    … Testing featured simultaneous measurement of force on this instrumented unit, pressure head at the base of the unit, and flow velocities below the SWL. Two main scenarios were tested, the isolated unit and fully armoured scenarios, under a range of regular waves and irregular sea states. …

    ottawa-retro Repository record for Wave-Induced Loading of Submerged Core-Loc Armour Units (opens in a new tab)

  12. Visualizing Load Path in Perforated Shear Walls

    … to develop a method that can help visualize load flow in perforated shear walls connected to rigid diaphragms. Rigidities are calculated using existing methods and combined as springs in series or parallel to represent a perforated wall. Loads taken by the wall segments correspond to the …

    usf Repository record for Visualizing Load Path in Perforated Shear Walls (opens in a new tab)

  13. MATRIX STIFFNESS SENSING BY NASCENT ADHESIONS AND THE ROLE OF RIAM IN ADHESION ASSEMBLY

    … of molecules within FAs by the exchange of the force between the ECM and filamentous actin (F-actin). Cells in turn respond to this stiffness by generating traction force that plays an important role in many biological events such as tissue morphogenesis, stem cell differentiation, wound …

    mtu Repository record for MATRIX STIFFNESS SENSING BY NASCENT ADHESIONS AND THE ROLE OF RIAM IN ADHESION ASSEMBLY (opens in a new tab)

  14. Shear Behaviour of Disturbed Regions in Reinforced Concrete Beams with Corrosion Damaged Shear Reinforcement

    … is to quantify the strength degradation in a reinforced concrete element caused by the corrosion of reinforcing steel. An understanding of the forces involved in the load carrying mechanisms is imperative; the transfer of shear forces in reinforced concrete beams is one of these load carrying …

    waterloo Repository record for Shear Behaviour of Disturbed Regions in Reinforced Concrete Beams with Corrosion Damaged Shear Reinforcement (opens in a new tab)

  15. Analysis and Design of Fiber Reinforced Polymer Retrofit of Reinforced Concrete Diaphragms

    In a building's lateral force resisting system (LFRS), structural elements are broadly categorized as horizontal, vertical, and foundation components. Diaphragms form the horizontal LFRS, transmitting lateral loads from earthquakes and wind events to vertical systems such as moment frames and shear …

    vt Repository record for Analysis and Design of Fiber Reinforced Polymer Retrofit of Reinforced Concrete Diaphragms (opens in a new tab)

  16. Modeling of thermomechanical and metallurgical phenomena in steel strip during hot direct rolling and runout table cooling of thin-cast slabs

    … of the temperature, deformation behavior (roll force, flow stress, strain and strain rate) and micro structural evolution (recovery, recrystallization, grain growth, austenite and ferrite grain sizes) during rolling in the Compact Strip Production (CSP) process, as well as the final mechanical …

    ubc Repository record for Modeling of thermomechanical and metallurgical phenomena in steel strip during hot direct rolling and runout table cooling of thin-cast slabs (opens in a new tab) Download PDF for Modeling of thermomechanical and metallurgical phenomena in steel strip during hot direct rolling and runout table cooling of thin-cast slabs (opens in a new tab)

  17. Modeling the Torsional Behaviour of Segmented Concrete Towers based on Warping Theory

    … of knowledge about the uneven distribution of forces in the horizontal joints also has a significant influence on the design models of the half-shell structure. Papers [B] and [C] present an engineering approach to determine the torsional behaviour of segmented concrete towers based on the …

    qucosa-diss

  18. Computational investigations of protein dynamics and its implications for biological functions

    … simulations on λ*YA with four different force fields. Two of the force fields yield compact non-native states with misplaced α-helix content within a few microseconds of the pressure drop. We conclude that the pressure-denatured state of λ*YA contains mainly residual helix and little …

    uiuc Repository record for Computational investigations of protein dynamics and its implications for biological functions (opens in a new tab)