Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 79 for “"force transfer"”.
-
Force transfer around openings in CLT shear walls
… due to development of stress concentration. Reinforcements provided to minimize this damage are designed for forces that develop at these corners known as transfer forces. In this thesis, the focus is on understanding the forces that develop around opening corners in cross laminated timber (CLT) …
-
Designing a Mechanical Linkage Capable of Decreasing Force Transfer from the Facemask to the Protective Helmet when Loading Occurs
… the facemask and helmet as a means of reducing force transfer from the facemask, through the helmet, and to the head and or neck of the athlete. Methods A novel prototype mechanical linkage of reasonable simplicity that provides 360° of freedom in motion capable of decreasing force transfer from …
-
Dynamic response of simply supported beams excited by piezoelectric actuators
… in active vibration control; however, the force transfer mechanism by which they interact with the structure to which they are attached needs to be understood to optimise the efficiency of their use. Various modelling approaches have been used over the past six (6) years to try and …
-
Identification of nonlinear and parametric systems with application to offshore structures
… is proposed. The unknown model of the restoring force or interaction force is represented in a set of base functions. The nonlinear system is decomposed into a number of no-memory nonlinear subsystems, each followed by a finite-memory linear system. These subsystems are then decoupled. A …
-
Oscillating flow about perforated cylinders
… flow in a large U-shaped water tunnel. The force- transfer coefficients (drag and inertia) were determined in the range of Keulegan-Carpenter numbers (K) from about 1 to 40. The results have shown that the effect of the perforations is to decrease the inertia coefficient and to increase the …
-
Global and local performance of prestressed girder bridges with positive moment continuity detail
… and some live load positions, and on the force transfer mechanisms through the diaphragm. The study utilized different approaches including analytical models for temperature evaluations and finite element models for structural assessments. Field data from a bridge using the new detail were …
-
The Microstructure and Material Properties of the Epicentral Tendon-Vertebra Attachment in Rainbow Trout
… shed light on their role in mediating efficient force transfer between tendon and bone, two tissues that differ vastly in their structure, composition, and material properties. Studies have also elucidated the importance of mechanical stimulation in maintaining tendon-bone attachment structures …
-
In-line forces on a slender structure subjected to combined waves and currents
… present investigation considers the hydrodynamic forces acting on a slender structure subjected to a combined wave and current flow regime. The experimental aspect of the study measured the in-line peak-to-peak forces on a vertical cylinder mounted in a wave-current flume. Although there were some …
-
Bond Strength of Ultra-High-Performance Concrete Under Direct Tension Pullout
… bars and the cover concrete and enables force transfer between the two media. Thirteen specimens comprising four distinct UHPC or ECC (Engineered Cementitious Composite) material compositions and two different values cover thicknesses to the embedded bar were tested. Experimental results …
-
Numerical analysis of oscillating flow about a circular cylinder
… a non-square grid. The analysis has produced force-transfer and fluid-damping coefficients comparable to those obtained experimentally for both types of flows (i.e., with and without current) and to those obtained with a square grid through the use of the IMSL library.
-
Ankle Mobility and Lower Extremity Functional Stability Assessment and Intervention for Collegiate Baseball Pitchers
… injuries, often associated with impaired force transfer through the kinetic chain. Limited ankle dorsiflexion may alter stride length and increase injury risk. Purpose: This study aimed to establish a screening tool to identify drive leg ankle imbalances in collegiate pitchers and examine …
-
Development of lightweight FRP bridge deck designs and evaluations
… The study found that local resistance and force transfer across the joints were the areas of potential improvement. The remainder of the study showed adequate performance of the decks.
-
Effect of Downhole Vibration on Coiled Tubing Reach in Horizontal Intervention
… the effect of vibrations to improve load transfer for a CT with a straight, a sinusoidally buckled and a helically buckled configuration. In order to capture the effect of vibration on the reduction of friction, the concept of apparent friction factor is introduced for all three types of …
-
Static pullout behaviour of soil nails in residual soil
… in residual soils under quasi-static pullout force. It seeks to address three issues involved in the prediction of pullout response and distribution of axial forces along the inclusion. The three issues are; 1. Composite behaviour of bar and grout and its collective interaction with the …
-
Active vibration control at machinery feet
… proposed here for vibration isolation is active force cancellation at points close to the vibration source. It uses force feedback for multiple-input and multiple-output control at the mounting locations. This is particularly attractive for rigid mounting of machine on relative flexible base …
-
Experimental Investigation of Sphere Slamming to Quiescent Water Surface-Pressure Distribution and Jetting Flow Field
… approach. Correlations between sphere impacting forces and jetting flow occurrences were explored. Pressure sensor was used to investigate the slamming pressures distributed around the sphere at five measuring points. The jetting flow fields were carried out using the bubble image velocimetry …
-
Methods to develop composite action in non-composite bridge floor systems: part I
… steel-concrete interface as the primary shear force transfer mechanism
-
Modeling, validation and parametric analysis of the axial dynamics of a vibration-assisted drilling tool
… the possibility of 85% increase in the impact force transfer and 125% increase in the mud flow operating range, when compared with the original design.
Page 1 of 4