Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"force-based design"”.
-
Design of Controlled Rocking Heavy Timber Walls For Low-To-Moderate Seismic Hazard Regions
… thesis proposes an adapted CRHTW in which the design and construction cost and complexity are reduced for low-to-moderate seismic hazard regions by removing supplemental energy dissipation and using cross-laminated timber (CLT) because of its positive economic and environmental potential in the …
-
Αντισεισμικός σχεδιασμός γεφυρών σκυροδέματος με βάση τις μετακινήσεις
The majority of seismic design researchers/specialists concludes that displacement-based design methodologies reduce the uncertainty of the design process and probably lead to less expensive structures. The absence of a simple displacement-based seismic design procedure for bridges that will be …
-
Collapse Safety Assessment of Steel Multi-storey Buildings with Friction Sliding Braced Frames and Backup Moment Resisting Frames as a Dual System
… the friction material used, development of the design procedure has been limited. Using a recently proposed force-based design method and considering detailed computational and modeling techniques, three types of seismic force resisting systems are presented herein: the bare Friction Sliding …
-
Seismic design and performance of steel moment resisting frame buildings designed using NBCC 2005
… including Canada feel that a performance-based design approach should be used to ensure that the structure has adequate strength and deformation capacities. Although the National Building Code of Canada (NBCC 2005) is not yet a fully performance-based code, it presents an objective-based …
-
Performance-based seismic analysis and design improvements of two precast concrete structural systems
… test results for a five story test building. In designing both precast systems, it is shown that traditional force-based design approach results in significantly higher level of design base shear compared to direct displacement-based design approach. After observing satisfactory performance in …
-
Seismic performance of multi-span RC bridge with irregular column heights
… keep bridges safe and serviceable. Modern bridge design codes include seismic detailing in order to ensure ductile behavior, which was absent in the pre-1970 codes that made older bridges vulnerable during earthquakes. The main parameters effecting the performance of bridge (tie spacing, concrete …
-
Performance based design and evaluation of reinforced concrete bridges
Performance based design (PBD) has been deemed as one of the most promising design methods in the past few decades. It reduces the uncertainties underline the tradition force based design (FBD) and acts as an efficient communication tool between technical and non-technical people. Canadian Highway …
-
Performance-based seismic design and evaluation of steel eccentrically braced frames with tubular links as bridge bents
The latest release of the Canadian Highway Bridge Design Code (CHBDC), S6-14, incorporates performance-based design (PBD) provisions for bridges in Canada for the first time. CHBDC S6-14 establishes two different design approaches, with the PBD being the standard method of design and force-based …
-
Critical seismic performance assessment of concrete bridge piers designed following Canadian Highway Bridge Design Code
Performance-based design (PBD) method is gradually taking over the traditional force-based design (FBD) for designing bridges in North America. Considering the importance of bridge structures in the transportation network, quantitative performance criteria were adopted in Canadian Highway Bridge …
-
Effects of Connections Detailing and Friction Dissipation Devices on the Seismic Response of a Hospital Steel Braced Frame Building
Hospitals are post-disaster buildings designed to withstand seismic forces that are amplified with an importance factor of IE= 1.5. Their seismic force-resisting system (SFRS) should be designed with Rd> 2.0, while the interstorey drift at each floor is limited to 1.0%hs. Herein, Rd is the …
-
Performance-based Seismic Design of Multi-Story Light-frame Wood Buildings using Adaptive Displacement-based Design Procedure
… open floor plan in the first story. The current force-based design procedure, namely the Equivalent Lateral Force (ELF) procedure, does not explicitly consider the contribution of non-structural elements. This research (1) studied soft-story deficiency in light-frame wood buildings due to …
-
Seismic response factors of code-designed high-rise buildings using 3D non-linear analysis
… recent initiatives and developments in building design provisions using performance-based design, practicing engineers frequently adopt force-based design approaches irrespective of the structural system or building irregularity. Modern seismic building codes adopt the concept of simplifying the …
-
Performance-base seismic design of woodframe buildings using non-linear time history analysis
Performance-based seismic design (PBSD) is a developing design methodology in the modern seismic design and research community and has already been applied to concrete and steel structures. However, the application to woodframe buildings, which represents the vast majority of the residential …
-
Performance-based seismic retrofit (PBSR) methodology for multi-story buildings with full-scale experimental validation
… of existing buildings. Many older buildings were designed prior to the implementation of modern seismic design codes. Although building codes have clearly evolved, the problem is still unresolved for older buildings that are code-deficient such as soft-story wood-frame buildings. Many retrofit …
-
seismic performance of reinforced masonry shear walls with different masonry boundary element configurations
Reinforced masonry (RM) shear walls are commonly used as a seismic force-resisting system (SFRS) in low and mid-rise buildings. Considerable progress has been made on the seismic performance of reinforced masonry shear walls with masonry boundary elements (RMSW+BEs). The integration of masonry …
-
Αντισεισμικός σχεδιασμός επίπεδων κατασκευών οπλισμένου σκυροδέματος με ιδιομορφικούς συντελεστές συμπεριφοράς και διάφορες στάθμες επιτελεστικότητας
In this Ph.D Thesis a performance-based seismic design method, for plane reinforced concrete (R/C) moment-resisting frames (MRF), MRF with Infills and dual system with rectangular Walls, is proposed. The method is a force-based seismic design one utilizing not a single strength reduction factor as …