Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"forced cooling"”.
-
AN EXPERIMENTAL STUDY OF FORCED COOLING ACROSS HEATED RECTANGULAR BLOCKS
Two dimensional laminar and turbulent forced convective flows over heated rectangular obstructions on insulated plates were experimentally investigated. Velocities were measured by a three beam Laser Doppler Velocimetry system operating in the backward scattering mode with a counter type signal …
-
A Flownex uncertainty analysis of a depressurised loss of forced cooling event for the PBMR
The world is currently experiencing an energy crisis. To cope with the rising demand in South Africa, nuclear power was identified as a clean, safe and reliable source of electricity. The Pebble Bed Modular Reactor (PBMR) is an inherently safe, next-generation nuclear power plant that uses pebble …
-
CFD Simulation Analyses of the Blowdown Phase of a Depressurized Loss of Forced Cooling Accident in a HTGR
This research numerically investigates the helium-air mixing in HTGR containment cavities during the blowdown phase of a simulated DLOFC accident. The results of the performed CFD simulation analyses, using the commercial code STAR-CCM+, are compared with reported measurements from an experiment …
-
Mathematical model of the forced cooling of anodes used in the aluminium industry : a thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Mathematics at Massey University
… presents a mathematical model of part of a forced cooling section of a closed furnace, where air is being sucked or blown through the flues by fans, so that the anodes cool more rapidly. Both one- and two-dimensional models are developed in order to calculate the transient temperature …
-
Macrosegregation in solidification of A356
… were produced in small moulds with natural cooling, forced cooling and insulated conditions and one casting was made in a large mould with natural cooling. The redistribution of solute in the castings has been evaluated using a novel image processing technique based on the area fraction of …
-
ALTERNATIVE MODERATOR CONCEPTS FOR MODULAR/MICRO HIGH TEMPERATURE GAS-COOLED REACTORS
… Accidents (DBAs) including Pressurized Loss of Forced Cooling and Depressurized Loss of Forced Cooling accidents for a 350-megawatt thermal prismatic-type mHTGR. Preliminary calculations of microcore neutronics and safety performance is demonstrated to illustrate a framework for designing a …
-
Manipulation of Heat Dissipation from Sides of Electrolytic Cells
… results. Both selective controlled air faced cooling and different cooling fins designs to the electrolytic cells shells were tested. Design features of a controlled air forced cooling network in term of nozzle diameters, distance from end of nozzles to the shell plate, nozzle angles and air …
-
Thermo-hydraulic analysis of the PBMR used fuel tank using computational fluid dynamics
… like a typical Light Water Reactor (LWR) when cooling of the reactor is lost. The thermo-hydraulic analysis of the Used Fuel Tank (UFT) is of great importance in the safety analysis of the PBMR. The UFT is one of two types of tanks that will be used to store fuel that has been in the reactor …
-
Assessing the Accuracy of Convective Heat Transfer from Overhead Conductor at Low Wind Speed Using Large Eddy Simulations (LES)
… Dynamics (CFD) to assess the accuracy of the forced cooling term for Real Time Thermal Rating (RTTR) of power lines in overhead conductor codes, IEEE 738 and CIGRÉ 207. The analysis is done for low wind speed, corresponding to Reynolds Number of 1,000, and 3,000. The project uses Large Eddy …
-
Effect of Cooling Circuit Duration on Formation of Solidification Shrinkage in A356 Casting Automative Wheels
… order to minimise the solidification shrinkage, forced cooling method is applied to avoid an isolated hot spot. The control of this forced cooling is achieved by cooling media, flow rate of cooling media and duration cooling circuit. Foundry experiments in industrial environment were conducted …
-
Numerical Analysis of 1/28 Scaled HTGR Reactor Building Test Facility Response to Depressurization Event
Depressurized Loss of Forced Cooling (DLOFC) accident is an important type of accident scenario in High Temperature Gas-Cooled Reactor (HTGR) design which is initiated by a break in Helium Pressure Boundary (HPB). This class of accident scenarios results in a depressurization of primary helium …
-
Avaliação das distorções de escala do sistema de refrigeração de cavidade de reator entre os reatores HTR-10 e HTR-PM, sob condições normais e de transientes
… including a reactor cavity that requires cooling owing to the high core outlet temperature. In order to ensure the integrity of the reactor cavity, a water-cooled reactor cavity cooling system (RCCS) that operates with passive heat removal processes is conceived in the project. Given the …
-
Development of a fission product release model and it's application at PBMR
… analysis. Developments in depressurized loss of forced cooling (DLOFC) accident analysis using GETTER led to the creation of FIPREX (Fission Product RElease under accident (X) conditions), and later FIPREX-GETTER. FIPREX-GETTER is designed as a wrapper around GETTER so that calculations can be …
-
CFD Modeling of an Air-Cooled Data Center
… centers are sufficiently cooled while too much forced cooling leads to economical losses and a waste of energy. The purpose of this thesis is to develop a CFD model of a server room at Fortlax data center that accurately predicts the temperature and flow field. The goal is to develop the CFD …
-
Aero-Thermal Modeling of Laser Metal Deposition with Wire (LMD-w): Development of a CFD-Based Methodology
… under realistic flow conditions. In addition, a forced cooling strategy is investigated, where argon is injected through tubes directly onto the surface, resulting in a significant improvement in the temperature distribution of the solid. The developed methodology provides a foundation for …
-
Development of MELCOR Input Techniques for High Temperature Gas-Cooled Reactor Analysis
… to input decks for a water-cooled reactor cavity cooling system (RCCS); the 400 MW Pebble Bed Modular Reactor (PBMR), the input for which is based on a code-to-code benchmark activity; and the High Temperature Test Facility (HTTF), which is currently in the design phase at Oregon State University. …
-
Electromagnetic Design and Advanced Thermal Management of Novel Modular Consequent Pole Permanent Magnet Machines
… 3) advanced thermal management using novel forced air and liquid cooling for the modular CPMs. Firstly, the influences of winding configurations on the electromagnetic performances of fractional-slot (FS-) and integer-slot (IS-) CPMs are investigated. Based on the findings, the CPMs with …
-
Informing Safety Analysis and Transient Testing for the Transformational Challenge Reactor
… levels each undergoing a pressurized loss of forced cooling accident showed greater temperature margins for the TRISO core at all power levels. Using this information and other scoping analyses, the TCR design team selected a power level of 3 MW and a TRISO-based core design. Once the …
-
CFD Modeling and Simulation of Natural Circulation in Helium- Cooled Very High Temperature Reactors
… under Pressurized or Depressurized Loss of Forced Cooling (P-LOFC or D-LOFC) events. An experimental facility inspired by the General Atomics 350 MWt Modular High Temperature Gas-Cooled Reactor (MHTGR) was developed at The City College of New York. The setup consists of a plenum-to-plenum …
-
Analysis of Intermittent Buoyancy Induced Flow in Asymmetrically Obstructed CANDU Nuclear Reactor Fuel Channels
… which help to mitigate events such as a loss of forced cooling or a loss of electrical power. During these events, decay heat must be removed using either emergency power driven active systems or through natural circulation phenomena. Depending on the configuration of the core at the time of the …
Page 1 of 2