Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 117 for “"fracture characterization"”.

  1. Natural fracture characterization, Frontier Formation, Wyoming

    Fractures can increase the permeability and producability of reservoirs by acting as fluid and gas conduits to wells. Networks of fractures are most important in reservoirs where little to no matrix permeability exists such as tight gas sandstones. Two significant variables, fracture length and the …

    texas Repository record for Natural fracture characterization, Frontier Formation, Wyoming (opens in a new tab)

  2. Fracture Characterization Using Multicomponent Elastic Waves

    Fractures impact reservoir management, drilling, and well completion. Therefore, we characterize fractures systems to understand subsurface stress and flow fields. I studied four topics on fracture characterization for both applied and earthquake seismology: (1) the effect of fractured reservoir …

    houston Repository record for Fracture Characterization Using Multicomponent Elastic Waves (opens in a new tab)

  3. Fracture characterization, structural controls and simulation

    Fracture network patterns have been studied in two areas with different structural settings: (a) Dolomitic limestones on Teton anticline, in the frontal part of the fold thrust belt in the Sawtooth Range, Montana and (b) Cedar Mesa sandstones within normal faulted structures in the Canyonlands …

    oklahoma-thes Repository record for Fracture characterization, structural controls and simulation (opens in a new tab)

  4. Viscoelastic fracture characterization of a solid propellant.

    … to be related to geometric and load parameters. Fracture characterization was then performed by experimentally relating the crack tip stress intensity factor to the crack velocity. The theory was applied to solid propellant fracture tests; however, the dewetting behavior of the propellant was not …

    nps Repository record for Viscoelastic fracture characterization of a solid propellant. (opens in a new tab)

  5. Laboratory hydraulic fracture characterization using acoustic emission

    … (AE) testing has aided in the understanding of fracture initiation and propagation in materials ranging from high strength steel to polymers to composite and geologic materials. Acoustic emissions are the phenomenon in which a material or structure emits elastic waves caused by the sudden …

    colo-mines Repository record for Laboratory hydraulic fracture characterization using acoustic emission (opens in a new tab)

  6. Fracture characterization of thin bonded asphalt concrete overlay systems

    … benefits. Conventional asphalt concrete fracture tests were developed for pavements with homogeneous asphalt concrete mixtures, and typically their thicknesses exceed two inches. The use of spray paver technology for construction of TBO leads to continuously varying asphalt binder …

    uiuc Repository record for Fracture characterization of thin bonded asphalt concrete overlay systems (opens in a new tab)

  7. Fracture characterization of a carbonate reservoir in the Arabian Peninsula

    Estimation of reservoir fracture parameters, fracture orientation and density, from seismic data is often difficult because of one important question: Is observed anisotropy caused by the reservoir interval or by the effect of the lithologic unit or multiple units above the reservoir? Often …

    texas Repository record for Fracture characterization of a carbonate reservoir in the Arabian Peninsula (opens in a new tab)

  8. Unconventional reservoir and hydraulic fracture characterization using distributed acoustic sensing

    … energy development by creating complex fracture networks and greatly expanding reservoir contact. However, the effectiveness of hydraulic fracturing depends on understanding reservoir heterogeneity and fracture propagation, which are governed by both geological conditions and completion …

    colo-mines Repository record for Unconventional reservoir and hydraulic fracture characterization using distributed acoustic sensing (opens in a new tab) Embargoed until 2027-05-09

  9. Advances in Natural Fracture Characterization in Heterogeneous and Anisotropic Reservoirs

    Natural fractures are the most common geologic structure in the Earth’s upper crust and have significant influence in a variety of geologic processes that affect many fields in geoscience and engineering related to hydrocarbon, geothermal, groundwater, and mineral resource exploration and …

    calgary Repository record for Advances in Natural Fracture Characterization in Heterogeneous and Anisotropic Reservoirs (opens in a new tab)

  10. Mechanical & fracture characterization of polymer CNT nanocomposites using atomistic simulations

    … and energy-efficient can be developed. Fracture, is identified as a critical phenomenon that must be explicitly studied to enable the proper design of new materials and structures. A material’s resistance to crack propagation is influenced by processes occurring across multiple length …

    greece Repository record for Mechanical & fracture characterization of polymer CNT nanocomposites using atomistic simulations (opens in a new tab)

  11. Constitutive and Fracture Characterization of an Anisotropic and Asymmetric Alloy Sheet

    … cubic materials) and their orientation-dependent fracture response. The present thesis aims to address some of these challenges to support the commercial implementation of these alloys. Examining ZEK100-O rare-earth magnesium rolled sheet as a model material, the constitutive plastic and fracture …

    waterloo Repository record for Constitutive and Fracture Characterization of an Anisotropic and Asymmetric Alloy Sheet (opens in a new tab)

  12. Seismic geometric attribute analysis for fracture characterization: New methodologies and applications

    … subsurface exploration, detection of faults and fractures from 3D seismic data is vital to robust structural and stratigraphic analysis in the subsurface, and great efforts have been made in the development and application of various seismic attributes (e.g. coherence, semblance, curvature, and …

    wvu Repository record for Seismic geometric attribute analysis for fracture characterization: New methodologies and applications (opens in a new tab)

  13. Fracture Characterization in Fine-Grained Sedimentary Systems: Miocene Monterey Formation, California

    … are primarily systems of interconnected fractures, faults and breccias. Fracture related data was collected from wave-cut terraces and dip-slope, beach cliff exposures along Gaviota Beach, approximately 30 miles west of Santa Barbara, off of highway 101 in Santa Barbara County, …

    boise Repository record for Fracture Characterization in Fine-Grained Sedimentary Systems: Miocene Monterey Formation, California (opens in a new tab)

  14. INTERFACE FRACTURE CHARACTERIZATION AND AN IMPROVED MULTIPHYSICS MODEL FOR RECHARGEABLE BATTERIES

    … develop novel experimental methods for interface fracture characterization in batteries and 2) to develop a comprehensive multiphysics model for rechargeable batteries.Capacity fade occurs in batteries mainly due to two different mechanisms: chemical andmechanical processes. The chemical process …

    msu Repository record for INTERFACE FRACTURE CHARACTERIZATION AND AN IMPROVED MULTIPHYSICS MODEL FOR RECHARGEABLE BATTERIES (opens in a new tab)

  15. DEVELOPMENT OF INDIRECT RING TENSION TEST FOR FRACTURE CHARACTERIZATION OF ASPHALT MIXTURES

    … have been introduced to characterize the fracture properties of hot mix (HMA); however, most are considered to be research tools due to the complexity of the test methods or equipment. This dissertation describes the development of the indirect ring tension (IRT) fracture test for HMA, …

    uky-thes Repository record for DEVELOPMENT OF INDIRECT RING TENSION TEST FOR FRACTURE CHARACTERIZATION OF ASPHALT MIXTURES (opens in a new tab)

  16. Anisotropic analysis and fracture characterization of the Haynesville Shale, Panola County, Texas

    … Shale, a proper understanding of natural fracture patterns is essential to enhancing the economic success of petroleum extraction. The spatial density of naturally occurring fracture sets affects drainage area and optimal drilling location(s), and the azimuth of the strike of the …

    texas Repository record for Anisotropic analysis and fracture characterization of the Haynesville Shale, Panola County, Texas (opens in a new tab)

  17. Natural fracture characterization of the New Albany Shale, Illinois Basin, United States

    … gas production from the shale is the natural fracture system. I test the hypothesis that a combination of outcrop and core observations, rock property tests, and geomechanical modeling can yield an accurate representation of essential natural fracture attributes that cannot be obtained from …

    texas Repository record for Natural fracture characterization of the New Albany Shale, Illinois Basin, United States (opens in a new tab)

  18. Fracture characterization of cortical bone at the micrometer and nanometer length scales

    Fracture in bone is common in a wide variety of health situations, and is of particular interest to structural engineers due to the adaptability of bone tissue in response to applied stresses. Investigations into the fracture processes within bone tissue can aid in developing medical therapies to …

    uiuc Repository record for Fracture characterization of cortical bone at the micrometer and nanometer length scales (opens in a new tab)

  19. Incorporating subcritical crack growth mechanics into natural fracture characterization for improved reservoir simulation

    … might be due to substantial flow through natural fractures unaccounted for in the simulation. Here, a method to obtain equivalent permeabilities from fracture networks generated by a geomechanical model, constrained by geologic deformation and mechanical properties of the reservoir rock, is …

    texas Repository record for Incorporating subcritical crack growth mechanics into natural fracture characterization for improved reservoir simulation (opens in a new tab)

  20. Fracture characterization of the hydraulic fracture test site HFTS2 with X-ray microtomography

    Fractures are regular features in subsurface porous media. Fractures are a critical factor in the rock’s strength, stiffness and the creation of preferential flow pathways. Although fractures are an intrinsic feature of the subsurface, current understanding of the geometry and the extent of natural …

    texas Repository record for Fracture characterization of the hydraulic fracture test site HFTS2 with X-ray microtomography (opens in a new tab)

Page 1 of 6