Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"fracture paths"”.

  1. Effects Of Bond Coat Surface Preparation On Thermal Cycling Lifetime And Failure Characteristics Of Thermal Barrier Coatings

    … with rough as-sprayed bond coats. Spallation-fracture paths depended on the lifetime of TBCs. Premature spallation of TBCs occurred at the interface between the YSZ and TGO. Longer durability can be achieved by restricting the fracture paths to the TGO/bond coat interface. Small particulate …

    ucf Repository record for Effects Of Bond Coat Surface Preparation On Thermal Cycling Lifetime And Failure Characteristics Of Thermal Barrier Coatings (opens in a new tab)

  2. Electrostatic adhesion testing of metallizations on silicon substrates

    … compounds near the interface may create easy fracture paths and can act as stress concentrators to initiate and propagate the fracture. These stressed areas may lead to localized adhesion failure under applied stress. It is shown that electrostatic adhesion testing is effective in providing …

    rice Repository record for Electrostatic adhesion testing of metallizations on silicon substrates (opens in a new tab)

  3. Multi-frac propagation in unconventional shale

    … stress shadows between adjacent stimulated fractures while maximizing fracture network and surface area in order to increase fluid production. The Zipper-Frac technique stimulates two parallel horizontally drilled wellbores, alternating between perforation clusters, while maintaining …

    texas Repository record for Multi-frac propagation in unconventional shale (opens in a new tab)

  4. Computational modeling of the transition from damage to fracture in intrinsically anisotropic porous media

    … number of numerical tools are available to model fracture propagation in brittle solids. However, the fundamental inception mechanisms at the micro-scale are not fully understood. Therefore, the goal of this doctoral research work is to understand the processes that govern the initiation and …

    gatech Repository record for Computational modeling of the transition from damage to fracture in intrinsically anisotropic porous media (opens in a new tab)

  5. Hydraulic fracturing through 3D printing and lattice modelling

    … 3D printed specimens are successfully fractured by the split Hopkinson pressure bar (SHPB) system for investigating the dynamic crack propagation and coalescence. In addition to the high accuracy and flexibility in specimen preparation, the desired fracture paths captured by the …

    unsw Repository record for Hydraulic fracturing through 3D printing and lattice modelling (opens in a new tab)

  6. Coupled geomechanics and multiphase flow modeling in naturally and hydraulically fractured reservoirs

    Fluid injection and production in highly fractured unconventional reservoirs could induce complex stress reorientation and redistribution. The strong stress sensitivity of fractured formations may also lead to non-negligible fracture opening or closure under the reservoir loading or unloading …

    texas Repository record for Coupled geomechanics and multiphase flow modeling in naturally and hydraulically fractured reservoirs (opens in a new tab)

  7. Spot Welding of Advanced High Strength Steels (AHSS)

    … Failure modes are detailed by observing weld fracture surfaces. In addition, cross-sections of partially fractured weldments were examined to detail fracture paths during static loading. Correlations between the fracture path and mechanical properties are developed using observed …

    waterloo Repository record for Spot Welding of Advanced High Strength Steels (AHSS) (opens in a new tab)

  8. Numerical Exploration of Mechanical Behavior of Damage Tolerant Architected Metamaterials

    … 3D lattices and examine for the first time the fracture toughness of 11 topologies, classified into plates, struts, and TPMS sheets, made of brittle material, under mode I and mode II loading conditions. Crack propagation paths were also explored, shedding light on dynamic fracture behavior. The …

    toronto-retro Repository record for Numerical Exploration of Mechanical Behavior of Damage Tolerant Architected Metamaterials (opens in a new tab)

  9. Investigation of the Inverse Fracture Occurrence in Drop Weight Tear Tests of X65 Q&T Pipeline Steels Under Impact Loading

    Abnormal fracture appearance (AFA) in Drop Weight Tear Testing (DWTT) constitute substantial matters of concern, particularly in sectors such as pipeline construction, where material integrity holds paramount importance for ensuring safety and reliability. AFA in DWTT refers to unexpected and …

    tamu Repository record for Investigation of the Inverse Fracture Occurrence in Drop Weight Tear Tests of X65 Q&T Pipeline Steels Under Impact Loading (opens in a new tab)

  10. Environmental & orientation effects on the ultrasonic fatigue of a single-crystal nickel superalloy

    … the fractographs suggest that opening mode fracture occurred under vacuum, likely linked to the enhanced performance, and proposed to be from significant localised heating around the crack tip under vacuum.</p> <p>The crystal orientations of the samples from EBSD were consistent and close to …

    oxford Repository record for Environmental & orientation effects on the ultrasonic fatigue of a single-crystal nickel superalloy (opens in a new tab)

  11. Multiscale failure mechanism studies on two-dimensional polymers for next-generation electronics

    … (elastic modulus of (35± 9) GPa and maximum fracture strength of (3.9± 0.5) GPa were determined using atomic force microscope (AFM)-based nanoindentation, while static crack characteristics (“secondary” crack with intergranular path) were subsequently studied. Based on insights gained from …

    qucosa-diss

  12. Dynamic Response in Transient Stress-Field Behavior Induced by Hydraulic Fracturing

    … that take part in the development of hydraulic fractures is a relatively new area of research with respect to the massive scale operations that are seen today.;The process of hydraulic fracturing relies upon understanding and exploiting the in-situ stress distribution throughout the area of …

    wvu Repository record for Dynamic Response in Transient Stress-Field Behavior Induced by Hydraulic Fracturing (opens in a new tab)

  13. Characterization and microstructure-based modeling of spot weld failure in hot stamped steel

    … of failure, post-failure energy absorption, and fracture paths are not considered. In the present work, spot weld failure for several automotive-grade press-hardening steels, Usibor®1500-AS, Ductibor®1000-AS, and Ductibor®500-AS, is investigated considering the effect of microstructure on failure …

    waterloo Repository record for Characterization and microstructure-based modeling of spot weld failure in hot stamped steel (opens in a new tab)

  14. Mechanisms Of Lifetime Improvement In Thermal Barrier Coatings With Hf And/or Y Modification Of Cmsx-4 Superalloy Substrates

    … TBCs on Hf- and/or Y-modified CMSX-4. The fracture paths changed from the YSZ/TGO interface to the TGO/bond coat interface when rumpling was suppressed. The geometrical incompatibility between the undulated TGO and EB-PVD YSZ lead to the failure at the YSZ/TGO interface for TBCs with …

    ucf Repository record for Mechanisms Of Lifetime Improvement In Thermal Barrier Coatings With Hf And/or Y Modification Of Cmsx-4 Superalloy Substrates (opens in a new tab)

  15. Innovative mix design of cementitious materials for enhancing strength and ductility

    … characteristics in terms of strength, ductility, fracture energy and crack growth pattern by incorporating micro sized inert carbonized particles in the mix design of cementitious composites. To achieve these objectives the micro sized inert carbonized particles were prepared from organic waste …

    poli-torino Repository record for Innovative mix design of cementitious materials for enhancing strength and ductility (opens in a new tab)

  16. Biomineralized Composites: Material Design Strategies at Building-Block and Composite Levels

    … slips under low loads, and shifts to cleavage fracture under high loads. In comparison, the P. placenta composites, composed of micro-sized single-crystal laths and extensive intercrystalline organic interfaces, exhibit better crack resistance. In contrast, the single-crystal A. rigida prisms …

    vt Repository record for Biomineralized Composites: Material Design Strategies at Building-Block and Composite Levels (opens in a new tab)