Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 376 for “"fracture surface"”.

  1. Constraining fracture permeability by characterizing fracture surface roughness

    Open and connected fractures, where present, control fluid flow and dominate solute transport. Flow through fractures has major implications for water resource management, underground waste repositories, contaminant remediation, and hydrocarbon exploitation. Complex fracture morphology makes it …

    texas Repository record for Constraining fracture permeability by characterizing fracture surface roughness (opens in a new tab)

  2. The Evolution of Fracture Surface Roughness and its Dependence on Slip

    … compression, impingement of opposing rough surfaces of a fracture can force the walls of the fracture apart during slip. Therefore, a fracture’s surface roughness exerts a primary control on the amount of dilation that can be sustained on a fracture since the opposing surfaces need to remain …

    temple Repository record for The Evolution of Fracture Surface Roughness and its Dependence on Slip (opens in a new tab)

  3. Shale Gas Well Fracture Surface Area Calculation Re-visited for Dynamic Formation Permeability

    … reservoir parameters such as the flow parameter, fracture half-length and total fracture surface area. However, the derivation of these methods neglects the stress dependent nature of formation permeability and the effects of molecular transport mechanisms on gas production. In this work, a …

    tamu Repository record for Shale Gas Well Fracture Surface Area Calculation Re-visited for Dynamic Formation Permeability (opens in a new tab)

  4. Biogeochemical Factors Impacting the Habitability of the Soudan Formation: Iron and Sulfur Cycling, Biofilms, and Fracture Surface Alteration

    Fractured-rock networks in the continental crust constitute one of the largest microbial habitats on earth. These environments are generally low in oxygen and are cut off from surface-derived carbon; bacteria and archaea instead derive their energy from the oxidation and reduction of inorganic …

    umn Repository record for Biogeochemical Factors Impacting the Habitability of the Soudan Formation: Iron and Sulfur Cycling, Biofilms, and Fracture Surface Alteration (opens in a new tab)

  5. An experimental investigation of the effects of elastic modulus and yield strength on fracture surface interference in shear loaded cracks

    … to study the effects of material properties on fracture surface interference in Mode II loaded cracks in 7075 aluminum. 4340 and 8642 steels. Factors studied included elastic modulus, yield strength, mode mixity and fracture surface geometry. An asymmetric four point bend specimen and fixture …

    unh-thes Repository record for An experimental investigation of the effects of elastic modulus and yield strength on fracture surface interference in shear loaded cracks (opens in a new tab)

  6. Establishing the perimortem interval: correlation between bone moisture content and blunt force trauma characters

    … macroscopic and microscopic blunt force trauma fracture characteristics as they varied when created every 28 days throughout a 141 day period. I determined how those changes correlated with bone moisture content and the postmortem interval. Results indicate that there is a significant …

    missouri Repository record for Establishing the perimortem interval: correlation between bone moisture content and blunt force trauma characters (opens in a new tab)

  7. A Study of Decarburization in SAE 1042 Steel: Its Effect on Fatigue Life, Tensile Properties, and Fatigue Fractography

    … was used to determine the effects of-increased surface decarburization on the fatigue life of SAE 1042 steel. This test was conducted on three series of test specimens: (1) specimens having no surface decarburization (series D-1), (2) specimens having a 0.038 inch (0. 97 mm) decarburized surface …

    ut-knoxville Repository record for A Study of Decarburization in SAE 1042 Steel: Its Effect on Fatigue Life, Tensile Properties, and Fatigue Fractography (opens in a new tab)

  8. The Origin and Nature of Flash Weld Defects in Iron-Nickel Base Superalloys

    … the nature and morphology of weld defects on the fracture surfaces of flash welded high temperature, high strength alloys. Emphasis is on the material-related phenomena instead of the more commonly studied welding process variables.</p> <p>Samples were fractured in a slow bend test using …

    ut-knoxville Repository record for The Origin and Nature of Flash Weld Defects in Iron-Nickel Base Superalloys (opens in a new tab)

  9. A microstructural study of the extension-to-shear fracture transition in Carrara Marble

    … a continuous transition from extension to shear fracture on the basis of mechanical behavior, macroscopic fracture orientation and fracture morphology where hybrid fractures with extension and shear fracture characteristics are formed at the intermediate stress conditions. Extension fracture …

    tamu Repository record for A microstructural study of the extension-to-shear fracture transition in Carrara Marble (opens in a new tab)

  10. Analysis of corrosion products in stress corrosion cracks

    … products formed on the stress corrosion fracture surface were analyzed by electron diffraction and energy dispersive x-ray analysis. Electron diffraction of corrosion products, both in situ and stripped from the fracture surface, showed the corrosion product was a spinel oxide in all …

    ubc Repository record for Analysis of corrosion products in stress corrosion cracks (opens in a new tab) Download PDF for Analysis of corrosion products in stress corrosion cracks (opens in a new tab)

  11. Fracture Conductivity With Application of 3D Printing Technology

    Fracture conductivity is a measure of the success of completion designs and subsurface fracturing treatments from fractured well performance. Conductivity can be evaluated from experimental investigation. Traditionally, samples for conductivity experiments involve fracturing downhole or outcrop …

    tamu Repository record for Fracture Conductivity With Application of 3D Printing Technology (opens in a new tab)

  12. Fracture Conductivity With Application of 3D Printing Technology

    Fracture conductivity is a measure of the success of completion designs and subsurface fracturing treatments from fractured well performance. Conductivity can be evaluated from experimental investigation. Traditionally, samples for conductivity experiments involve fracturing downhole or outcrop …

    tamu Repository record for Fracture Conductivity With Application of 3D Printing Technology (opens in a new tab)

  13. Fracture Conductivity With Application of 3D Printing Technology

    Fracture conductivity is a measure of the success of completion designs and subsurface fracturing treatments from fractured well performance. Conductivity can be evaluated from experimental investigation. Traditionally, samples for conductivity experiments involve fracturing downhole or outcrop …

    tamu Repository record for Fracture Conductivity With Application of 3D Printing Technology (opens in a new tab)

  14. An electron fractography (SEM)investigation of heat-affected zone in the newly developed Climax low-carbon Mn-Mo-Nb Steel

    … 52 ft lbs impact energy absorbed at 10 per cent fracture appearance. The 50% shear fracture appearance transition temperature was about -80&deg;f for the 1l50&deg;F and the 1600&deg;F peak temperature cycles, and for the 1350&deg;F and the 2400&deg;F cycles was about 0&deg;F and 70&deg;F, …

    ut-knoxville Repository record for An electron fractography (SEM)investigation of heat-affected zone in the newly developed Climax low-carbon Mn-Mo-Nb Steel (opens in a new tab)

  15. Crack-Particle Interactions in Brittle Composites

    <p>A study was made of the fracture in a model composite containing nickel spheres in a glass matrix. The macroscopic fracture characteristics of the system were determined by fracture surface energy, strength and elastic modulus measurements. The microstructures of the composites were defined …

    mcmaster Repository record for Crack-Particle Interactions in Brittle Composites (opens in a new tab)

  16. Three-dimensional Modeling of Acid Transport and Etching in a Fracture

    Acid fracture stimulation generates higher well production but requires engineering design for treatment optimization. To quantify the cost and benefit of a particular acid fracture treatment an engineer must predict the resulting fracture’s conductivity, which is based on the etched width created …

    tamu Repository record for Three-dimensional Modeling of Acid Transport and Etching in a Fracture (opens in a new tab)

Page 1 of 19