Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 71 for “"fracture testing"”.

  1. Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition

    … to ensure such Zr components operate safely, fracture analysis of Zr alloys has been widely studied. Considering the high cost and difficulties associated with using neutron-irradiated Zr specimens for fracture analysis, proton irradiated testing has been proposed to reduce the cost and …

    queens Repository record for Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition (opens in a new tab)

  2. Characterization of Mixed-Mode Fracture Testing of Adhesively Bonded Wood Specimens

    … energy release rates (G) for mixed-mode (I/II) fracture of wood adhesive joints. The aims of the study were: (1) quantifying the fracture properties of two material systems, (2) analyzing the aspects that influence the fracture properties of bonded wood, (3) refining test procedures that …

    vt Repository record for Characterization of Mixed-Mode Fracture Testing of Adhesively Bonded Wood Specimens (opens in a new tab)

  3. Crack Tip Micromaching by Femtosecond Laser for Fracture Testing of Metal Laminates

    … cracks for SEM in-situ mini cantilever fracture testing. A parameter space is defined to attempt to capture an acceptable set of laser settings which both reduce the heat affected zone and create an etched geometry mimicking a crack into the sample to facilitate crack propagation in bend …

    unm Repository record for Crack Tip Micromaching by Femtosecond Laser for Fracture Testing of Metal Laminates (opens in a new tab)

  4. Characterizing the Durability of PF and pMDI Adhesive Wood Composites Through Fracture Testing

    … using the double-cantilever beam (DCB) method of fracture testing. The relative durability of phenol-formaldehyde (PF) and isocyanate (pMDI) adhesives was compared using a 2-hour boil test and an environmental test. The feasibility of using oriented strandboard (OSB), oriented strand lumber (OSL) …

    vt Repository record for Characterizing the Durability of PF and pMDI Adhesive Wood Composites Through Fracture Testing (opens in a new tab)

  5. Aspects of Wood Adhesion: Applications of 13C CP/MAS NMR and Fracture Testing

    … A new test geometry for the evaluation of the fracture toughness of wood-adhesive bonds was developed. Consistent and reliable results were obtained. It was found that low molecular weight PF possessed enhanced durability over high molecular weight.

    vt Repository record for Aspects of Wood Adhesion: Applications of 13C CP/MAS NMR and Fracture Testing (opens in a new tab)

  6. Optimized Evaluation of Bone Tissue Material Properties by Inverse Finite Element Analysis and Femur Fracture Testing

    … cadaveric femora that were previously tested to fracture in a fall on the hip loading configuration. Recorded force-displacement data are used to determine stiffness, yield force, and femoral strength values. Finite element (FE) models of the femora are developed from the quantitative computed …

    ndsu Repository record for Optimized Evaluation of Bone Tissue Material Properties by Inverse Finite Element Analysis and Femur Fracture Testing (opens in a new tab)

  7. The Use of a Tuning Fork and Stethoscope Versus Clinical Fracture Testing in Assessing Possible Fractures

    Traditional fracture testing in the field of athletic training relies heavily on subjective responses of the athlete. Percussion and compression type tests rely on the athlete stating an increase in pain which represents a positive symptom of a possible fracture. The tuning fork and stethoscope …

    vt Repository record for The Use of a Tuning Fork and Stethoscope Versus Clinical Fracture Testing in Assessing Possible Fractures (opens in a new tab)

  8. Mode-I Fracture in Bonded Wood: Studies of Adhesive Thermal Stability, and of the Effects of Wood Surface Deactivation

    … the common theme in each was the use of mode-I fracture testing to evaluate wood adhesion. In the first study, mode-I fracture testing was used to compare the thermal stability of polyurethane (PUR) and resorcinol-formaldehyde (RF) wood adhesives. Bonded specimens for both adhesives were …

    vt Repository record for Mode-I Fracture in Bonded Wood: Studies of Adhesive Thermal Stability, and of the Effects of Wood Surface Deactivation (opens in a new tab)

  9. Combined loading fracture trajectories of viscoelastic materials.

    The critical stress intensity factors and fracture trajectories for both filled and unfilled viscoelastic plane stress specimens were experimentally determined by controlled crack elongation. Fracture testing included combined displacement loadings both of single and bi-material specimens with …

    nps Repository record for Combined loading fracture trajectories of viscoelastic materials. (opens in a new tab)

  10. An experimental investigation of mixed-mode fracture I/II/III of PMMA and aluminium 7075-T6

    This thesis has studied the mixed-mode I/II/III fracture of the specimens made of PMMA and Al7075-T6 materials. In doing so, a hybrid experimental-numerical approach using a custom-made hardware/software test-bed and Finite Element Analysis (FEA) was employed. To apply mixed-mode I/II/III loading …

    unsw Repository record for An experimental investigation of mixed-mode fracture I/II/III of PMMA and aluminium 7075-T6 (opens in a new tab)

  11. Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach

    … hardness, modulus, yield strength and fracture toughness were measured and calculated for all composite materials. The indentation modulus and fracture toughness values were compared and correlated with the test data obtained from the conventional three-point bend test method. The …

    nus Repository record for Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach (opens in a new tab) Download file for Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach (opens in a new tab)

  12. Three-Dimensional Mixed-Mode Fracture of the Four-Point Shear Specimen

    Traditionally, fracture testing has focused on the fracture toughness of specimens undergoing pure mode I loading, often simplified by 2D assumptions of plane strain or plane stress. In reality, components have finite-thickness, and often see complex loading configurations. To study this complex …

    carleton Repository record for Three-Dimensional Mixed-Mode Fracture of the Four-Point Shear Specimen (opens in a new tab)

  13. Effects of deformation modes on the susceptibility of delayed fracture of advanced high strength steels

    … modes on the susceptibility to delayed fracture in advanced high strength steels (AHSSs) were evaluated using four types of commercially-produced sheet steels (DP780, DP980, TRIP780 and TRIP980). Specimens were strained by either uniaxial tension or bending prior to hydrogen charging and …

    colo-mines Repository record for Effects of deformation modes on the susceptibility of delayed fracture of advanced high strength steels (opens in a new tab)

  14. Crack propagation in isotropic materials

    … on Gurney and Hunt's quasi-static method of fracture testing.<br/><br/>The applicability of the finite element method of analysis to problems of fracture mechanics is demonstrated for the simple cases where a theoretical solution is obtainable. The comparison of both solutions gives good …

    southwales Repository record for Crack propagation in isotropic materials (opens in a new tab) Download PDF for Crack propagation in isotropic materials (opens in a new tab)

  15. Carboxymethylcellulose Acetate Butyrate Water-Dispersions as Renewable Wood Adhesives

    … light and fluorescence microscopy, and mode I fracture testing. Thermal analyses showed that the polymer glass transition temperature significantly increased when bonded to wood. CMCAB dispersions produced fairly brittle adhesive-joints; however, it is believed toughness can likely be improved …

    vt Repository record for Carboxymethylcellulose Acetate Butyrate Water-Dispersions as Renewable Wood Adhesives (opens in a new tab)

  16. Damage Analysis of Aluminum Structure Repaired with A Composite Patch

    … patch repaired structures. The compact tension testing of aluminum, four-point bend and fracture testing of composite repaired structures are employed to investigate the yielding and cracking in aluminum, fiber breakage, matrix cracking and delamination in the composite patch, and disbond of the …

    utk-theses Repository record for Damage Analysis of Aluminum Structure Repaired with A Composite Patch (opens in a new tab)

  17. Study of composite interface strength and crack growth monitoring using carbon nanotubes

    … composite layers was studied using Mode II fracture strength testing. Both carbon fiber and glass fiber composites were used with the vinyl ester resin. First, the single-step cured (i.e., co-cured) composite interface strength was compared to that of the two-step cured interface as used in …

    nps Repository record for Study of composite interface strength and crack growth monitoring using carbon nanotubes (opens in a new tab)

  18. Investigating the Surface Energy and Bond Performance of Compression Densified Wood

    … using opening mode double cantilever beam fracture testing and cyclic boiling of one half of all fracture samples. Phenol formaldehyde film (PF-film) and polymeric diphenylmethane diisocyanate (pMDI) were the two different adhesives used to bond fracture samples. Hygro-thermal samples …

    vt Repository record for Investigating the Surface Energy and Bond Performance of Compression Densified Wood (opens in a new tab)

  19. Regenerated spider silk as a new biomaterial for microelectro-mechanical systems ((MEMS) applications

    … the film on silicon substrate, and by fracture testing of the microbridge. Once these mechanical properties were obtained, the magnetic properties were added to the spider silk film to add more hnctionality to the material. This was done by blending the film with ferromagnetic materials …

    ubc Repository record for Regenerated spider silk as a new biomaterial for microelectro-mechanical systems ((MEMS) applications (opens in a new tab) Download PDF for Regenerated spider silk as a new biomaterial for microelectro-mechanical systems ((MEMS) applications (opens in a new tab)

Page 1 of 4