Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 83 for “"friction stir processing"”.

  1. Statistical Investigation of Friction Stir Processing Parameter Relationships

    Friction Stir Welding (FSW) is an emerging joining technology in which basic process understanding is still inadequate. Knowledge of FSW parameter relationships is needed to better understand the process and implement proper machine control. This study utilized a 3-factor, 3-level factorial design …

    byu Repository record for Statistical Investigation of Friction Stir Processing Parameter Relationships (opens in a new tab) Download PDF for Statistical Investigation of Friction Stir Processing Parameter Relationships (opens in a new tab)

  2. Multiple pass friction stir processing for high strain rate superplasticity and the addition of nanotubes into aluminum through friction stir processing

    Friction stir welding (FSW) is a recently developed process for welding aluminum alloys that has expanded into applications other than welding by the concept of friction stir processing (FSP). Through FSP, it has been found that the properties of materials can be enhanced whether by inserting …

    must-thes Repository record for Multiple pass friction stir processing for high strain rate superplasticity and the addition of nanotubes into aluminum through friction stir processing (opens in a new tab)

  3. An Alternative System Identification Method for Friction Stir Processing

    Temperature control has been implemented in friction stir processing and has demonstrated the ability to give improved process control. In order to have optimal control of the process, the parameters of the system to be controlled must be accurately identified. The system parameters change with …

    byu Repository record for An Alternative System Identification Method for Friction Stir Processing (opens in a new tab) Download PDF for An Alternative System Identification Method for Friction Stir Processing (opens in a new tab)

  4. Friction stir processing of AS-CAST AA5083 Superplastic response

    … of continuously cast AA5083 were subjected to friction stir processing (FSP) by three overlapping plunge and traverses. The FSP used a threaded pin tool with a pin diameter of 3 mm, pin length of 3 mm and a shoulder diameter of 10 mm. The process was run at constant tool rotation and traverse …

    nps Repository record for Friction stir processing of AS-CAST AA5083 Superplastic response (opens in a new tab)

  5. Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing

    Friction stir processing has been employed to produce metal matrix composites by incorporating reinforcement particles in an Al 5059 matrix. Various particles with sizes from 130 nm to 4.3 um, and different process parameters, were examined to obtain a uniform distribution of particles within the …

    waterloo Repository record for Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing (opens in a new tab)

  6. Predictive relationships in friction stir processing of nickel-aluminum bronze

    Friction Stir Processing (FSP), a hot working materials processing technology, and various analytical and computational models for it are reviewed. A simulation is used to develop a new predictive relationship for power dissipated during FSP of Ni-Al bronze according to tool traversing velocity and …

    nps Repository record for Predictive relationships in friction stir processing of nickel-aluminum bronze (opens in a new tab)

  7. Friction stir processing and fusion welding in nickel aluminum propeller bronze

    Friction Stir Processing (FSP) is currently being developed for applications including as-cast Nickel- Aluminum Bronze (NAB). Fabrication and repair of the United States Navy's NAB propellers involve fusion welding of as-cast NAB and so it is probable that FSP is likely to encounter as deposited …

    nps Repository record for Friction stir processing and fusion welding in nickel aluminum propeller bronze (opens in a new tab)

  8. Friction Stir Processing of Cobalt-Chromium-Molybdenum for Improvements in Biomedical Applications

    Friction Stir Processing (FSP) has been investigated as a means of microstructural modification aimed at improving mechanical properties such as corrosion resistance and wear resistance of biomedical-grade cobalt-chromium-molybdenum (CoCrMo) alloy. FSP was successfully completed on high-carbon ASTM …

    byu Repository record for Friction Stir Processing of Cobalt-Chromium-Molybdenum for Improvements in Biomedical Applications (opens in a new tab) Download PDF for Friction Stir Processing of Cobalt-Chromium-Molybdenum for Improvements in Biomedical Applications (opens in a new tab)

  9. Friction stir processing parameters and property distributions in cast nickel aluminum bronze

    … combined with acceptable mechanical properties. Friction stir processing (FSP) can be used to improve the alloyâ s mechanical properties by localized microstructure modification in the cast material. FSP converts an as-cast microstructure to a wrought condition in the absence of macroscopic shape …

    nps Repository record for Friction stir processing parameters and property distributions in cast nickel aluminum bronze (opens in a new tab)

  10. Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties

    <p>Friction stir processing (FSP) is an energy efficient solid-state material processing technique for microstructure modification of commercial high-strength Al alloys. Many variant techniques were developed in recent years that enabled light-weight and high-strength structure fabrication. …

    utk-theses Repository record for Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties (opens in a new tab)

  11. Microstructure Evolution and Mechanical Response of Material by Friction Stir Processing and Modeling

    … allows the identification and correction of processing deficiencies when the desired properties are not achieved, depending on the microstructure. Hence, the co-relation between process-microstructure-properties helped reduce the number of experiments, materials & tool costs and saved much …

    unt Repository record for Microstructure Evolution and Mechanical Response of Material by Friction Stir Processing and Modeling (opens in a new tab)

  12. Microstructure modification for improved mechanical properties in A356 Al using friction stir processing

    … A356. The third paper examines the influence of processing parameters on process loads, temperature, microstructure and the corresponding static mechanical properties. The fourth and final paper deals with crack growth rates in FSP A356"--Research Objective, pages 29-30.

    must-thes Repository record for Microstructure modification for improved mechanical properties in A356 Al using friction stir processing (opens in a new tab)

  13. Microstructural effects of multiple passes during friction stir processing of nickel aluminum bronze

    Friction Stir Processing (FSP) is an emerging technology based on Friction Stir Welding that allows the near surface regions of a material to be selectively processed to improve the material properties. Single and multiple pass samples of nickel aluminum bronze were examined and their …

    nps Repository record for Microstructural effects of multiple passes during friction stir processing of nickel aluminum bronze (opens in a new tab)

  14. Friction stir processing of nickel aluminum propeller bronze in comparison to fusion welds

    Friction Stir Processing (FSP) is currently being considered for use in manufacture of the Navy's NiAl bronze propellers. Incorporating this technology may improve service performance and enable reduction of manufacturing time and cost. This program of research has employed miniature tensile sample …

    nps Repository record for Friction stir processing of nickel aluminum propeller bronze in comparison to fusion welds (opens in a new tab)

  15. The isothermal deformation of nickel aluminum bronze in relation to friction stir processing

    … strain rate and temperature gradients during Friction Stir Processing (FSP) render measurement of key parameters in the stir zone infeasible with common methods. The objective of this research was to separate the effects that temperature and deformation in an experimental study of the …

    nps Repository record for The isothermal deformation of nickel aluminum bronze in relation to friction stir processing (opens in a new tab)

  16. Modeling of Fracture Toughness of Magnesium Alloy WE43 Before and After Friction Stir Processing

    … of a magnesium alloy WE43 before and after friction stir processing (FSP) is developed, and the results are compared to those produced by a digital image correlation (DIC) system during an experiment from another paper. The model results of the material before FSP matched well with the DIC …

    unt Repository record for Modeling of Fracture Toughness of Magnesium Alloy WE43 Before and After Friction Stir Processing (opens in a new tab)

  17. Crack Healing in 304L Stainless Steel Using Additive Manufacturing and Friction Stir Processing (FSP)

    … steel trials also showed hardening in the FSP stir zone. Three-point bend tests were performed to show that an existing crack underneath the FSP zone would not propagate through the nugget. All evaluations supported a substantial increase in yield strength increased after FSP.

    byu Repository record for Crack Healing in 304L Stainless Steel Using Additive Manufacturing and Friction Stir Processing (FSP) (opens in a new tab) Download PDF for Crack Healing in 304L Stainless Steel Using Additive Manufacturing and Friction Stir Processing (FSP) (opens in a new tab)

  18. Evaluation of Friction Stir Processing of HY-80 Steel Under Wet and Dry Conditions

    … and mechanical property changes associated with Friction Stir Processing(FSP) of HY-80 steel under dry and underwater conditions. HY-80 is a low-carbon alloy steel that is used in a quenched and tempered condition and is highly susceptible to hydrogen assisted cracking associated with …

    nps Repository record for Evaluation of Friction Stir Processing of HY-80 Steel Under Wet and Dry Conditions (opens in a new tab)

  19. Modeling of thermal and mechanical effects during friction stir processing of nickel-aluminum bronze

    Friction Stir Processing (FSP), although relatively simple in concept, results in an extremely complex thermomechanical treatment to the material being processed. Previous studies of FSP have shown that the process results in extremely high strain, strain rates and temperatures as well as gradients …

    nps Repository record for Modeling of thermal and mechanical effects during friction stir processing of nickel-aluminum bronze (opens in a new tab)

Page 1 of 5