Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 73 for “"frictional heating"”.
-
The role of frictional heating in the development of catastrophic landslides
In this work, a new thermo-mechanical model is developed by improving on an existing one, applicable to large deep seated landslides and rockslides consisting of a coherent mass sliding on a thin clayey layer. The considered time window is that of catastrophic acceleration, starting at incipient …
-
Joint degradation, energy balance and frictional heating of rocks under cyclic shear
… model was developed, explicitly incorporating frictional work as a heat source. Validation against infrared thermography confirmed the capacity of the model to reproduce spatiotemporal temperature fields and link joint degradation with frictional heating. Finally, physics-informed …
-
Modelling the combined effects of creep and frictional heating in the development of landslides
… the creep and collapse regimes, beyond which frictional heating leads to the final failure.<br/><br/>A different thermo-poro-mechanical model for landslides based on a constitutive theory that combines a thermo-plasticity model with a creep model for soils was also developed. The model was …
-
The effects of frictional heating on the thermal, hydrologic, and mechanical response of a fault
… of excess heat and fluid pressures generated by frictional heating. In this study a numerical model is formulated which incorporates the effects of frictional heating on the thermal, hydrologic, and mechanical response of a small patch of the failure surface. This model is used to examine the …
-
Structure, Mineralogy, Vitrinite Reflectance, and Shear Heating of the 3067 m MD Fault from Safod: An Investigation of Off-Fault Frictional Heating
… determine if there was evidence of slip-induced frictional heating using vitrinite reflectance gethermometry of organic material in the host rock and shear zone. The 3067 m MD fault juxtaposes a siltstone and an arkosic sandstone across the shear zone that displays inhomogeneous deformation. The …
-
A redetermination of the specific heat of water between 10ºC and 20ºC
… result of his discovery of the Law of Electrical Heating and were made by the electrical heating of water; but the large differences between the results given by this method and those obtained by the more direct method of frictional heating, led him to believe that the absolute values of the …
-
Evolution of Frictional Behavior of Punchbowl Fault Gouges Sheared at Seismic Slip Rates and Mechanical and Hydraulic Properties of Nankai Trough Accretionary Prism Sediments Deformed at Different Loading Paths
Frictional measurements were made on natural fault gouge at seismic slip rates using a high-speed rotary-shear apparatus to study effects of slip velocity, acceleration, displacement, normal stress, and water content. Thermal-, mechanical-, and fluid-flowcoupled FEM models and microstructure …
-
TRIBOLOGY AND PROPERTY CHARACTERISATION OF BULK METALLIC GLASS (BMG)
… major findings of the thesis are as follows: (1) Frictional heating plays a central role in the variation of tribological properties of a BMG during contact sliding. The BMG deforms superplastically or becomes nanocrystalline depending on the amount of frictional heating. Under this heating, the …
-
F-region Dusk Ion Temperature Spikes at the Equatorward Edge of the High Latitude Convection Region
… were the result of electric elds increasing the frictional heating between ions and neutrals. By then examining geophysical data, it was found that these events were temporal and related to changes in magnetic indices. One possible explanation for the observations is that the electric eld is at …
-
From Friction to Decarbonation: Unraveling Carbonate Rock Dynamics Under Seismic Velocity
… of dolomite, calcite, and siderite due to frictional heating (~600ºC). Key reactions, such as CaCO3 ↔ CaO + CO2, produce carbon dioxide in gaseous or supercritical fluid forms, drastically reducing friction along fault planes and controlling the mechanical behavior of seismogenic faults. …
-
On developing a graphitic white iron for metal-to-metal wear systems
… layers were formed on the wearing surface due to frictional heating and surface deformation. These white layers were extremely brittle and could be fractured easily during use, which in turn led to micro-galling defects that caused parts leakage. Increasing thermal diffusivity of the material was …
-
An Evaluation Of UHPLC-MS Technology Encompassing Elevated Temperatures, Low Viscosity Operation and Recently Developed Stationary Phase Materials
… for installation, and due to the effects of frictional heating associated with operation at ultra-high pressures. An attempt to reduce the effect of frictional heating by modifying the column hardware was evaluated, however only slight improvements were observed. This system has benefits to …
-
On the thermal behaviour of gas turbine filament seals
… of the seal installation response to frictional heat generated at the point of filament-rotor contact during operation has limited the ability to predict engine closures and hence seal behaviour and life. The resulting temperature rises may compromise the mechanical integrity of the …
-
Design and performance assessment for a novel friction smoke generator : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Chemical and Bioprocessing at Massey University, Palmerston North, New Zealand
… against a spinning wheel, roughened to provide frictional heating. The heating raises the interface temperature above 240 °C, where smouldering occurs. The primary objective of this project was to understand the dynamics of a novel friction smoke generator, designed in a prior project, but …
-
Structural features of coal measures of the Kootenay formation, southeastern Canadian Rocky Mountains
… in the laboratory for short durations, that frictional heating during shearing may have resulted in temperatures of up to 450°C. . Adjacent to and within other shear zones there is no evidence for frictional heating. The presence or absence of frictional heating may be the result respectively …
-
Correlation between heat input and residual stresses from friction stir welding of AA5052 plate
… that there is a complex relationship between frictional heating and mechanical stirring of the material. As a result, there is a rotational speed, which requires minimum torque during welding.
-
The effects of isothermal deformation and annealing on the microstructure of nickel-aluminum-bronze propeller material
… and sticking friction result in a combination of frictional heating and adiabatic heating due to plastic deformation. A stirring effect results in the formation of a zone of severe shear deformation and local temperatures approaching 90% of the melting temperature. FSP results in local …
-
Thermal analysis of sliding contact systems using the boundary element method
… is developed to determine the distribution of frictional heat and the ensuing surface or subsurface temperature rise caused by frictional heating between sliding solids. The theoretical model consists of two semi-infinite substrates each coated with a film of arbitrary thickness and thermal …
-
A thermal instability mechanism for glacier surges
… of the Crank-Nicholson method. Geothermal and frictional heating are shown to dominate the melting of ice from the base of the glacier, and the water that is formed is assumed to flow in an approximately uniform sheet between glacier and bedrock. The sliding theory developed by Weertman is used …
-
A model of magnetic hyperthermia
… fields (H < 250 Oe) are used, the mechanism of heating is not well understood and can be due to losses in a hysteresis cycle, susceptibility loss, or frictional heating due to particle rotation in a liquid environment. In this work a theoretical study has been undertaken of hysteresis loss using …
Page 1 of 4