Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"front contact"”.
-
Growth and Characterization of ZnO for the Front Contact of Cu(In,Ga)Se2
ZnO window layers for CIGS solar cells are grown with a DC sputtering technique instead of a conventional RF sputtering technique. Transparent window layers and buffer layers are sputtered from the Zn target in the presence of Oxygen. The window layer is doped with Aluminum in order to achieve high …
-
Optimization of the front contact to minimize short-circuit current losses in CdTe thin-film solar cells
… can further lower the cost of these modules. The front contact of the CdTe thin-film solar cell is critical to device efficiency for three important reasons: it must transmit light to the CdTe absorber to be collected, it must form a reasonably passive interface and serve as a growth template for …
-
Simulation of solar cell losses depending on cell design
… method. The layout and layer thicknesses of the front contact were considered as well as the back contact conductivity. It was concluded that the transparent conductive oxide in the front contact and the opaque, highly conductive grid printed on top, should be optimised to give a maximal …
-
LAYER BY LAYER NANOASSEMBLY OF COPPER INDIUM GALLIUM SELENIUM (CIGS) NANOPARTICLES FOR SOLAR CELL APPLICATION
… molybdenum (Mo), and ITO were used as back contacts and ITO was used as front contact for all the devices. The devices were characterized the Keithley semiconductor characterization instruments and micromanipulator probing station. For a CIGS and n-ZnO films device with PEDOT as back contact …
-
Modeling of QE, I-V Characteristics of MSM (Metal-Semiconductor-Metal) Mercuric Iodide Thin Films with MEDICI<sup>TM</sup>
… coating which acts as the growth surface and front contact. The back contact, Palladium (Pd), is deposited by sputtering through a shadow mask. The films are circular in shape with an approximate diameter of 2.5 cm and thicknesses ranging from 50-600 micro m. The film has seven contact points …
-
Formation of screen-printed contacts on multicrystalline silicon (mc-Si) solar cells
… for depositing both the Ag paste based gridded front and Al based back (whole area) metal contacts.. This thesis relates to experimental and theoretical studies of contact formation mechanisms in silicon solar cells. Temperature distribution studies during optical processing by. attached …
-
Optical Response of Polycrystalline Mercuric Iodide Photoconductive Detectors
… surface for the films and also functions as the front contact of the detector.Palladium which is sputtered on top of this film acts as the back contact. There are a total of seven contacted devices on each film sample and each device has been tested for its optical response in terms of Spectral …
-
Heterosandūros tarp Si ir 2D MoS2 sluoksnių tiesioginis formavimas ir fotovoltinių charakteristikų tyrimas /
… type Silicon with 2 MoS2 layers and with Ag back contact and Ti/Au front contact. From Raman spectra we can see that formed MoS2 layers have a lot of Mo oxides and other impurities.
-
Electronic and photonic devices: experimental investigations of hydrogenated amorphous silicon substrate n+/i/p+ solar cell and fundamental properties of quantum wells with cylindrical geometry and applications to electronics and photonics
… (ITO) conductive transparent film for the front contact. Semi-transparent chromium (Cr), deposited by thermal evaporation, is used as an Ohmic front contact to the boron-doped a-(Si,C):H p[superscript]+ layer. The p[superscript]+ layer was smoothly connected to the i layer by an a-(Si,C):H …
-
Development and application of novel thermomechanical cleave technique for CDTE solar cells
… that as the bulk continues to improve, the front interface becomes a bottleneck for performance. Because CdTe is stan- dardly grown in the superstrate configuration, however, the front interface is buried under microns of material and difficult to access. Moreover, the high temperatures and …
-
Titanium dioxide as minority charge carrier separating contact to crystalline p-type silicon
… recombination rate at the metal / semiconductor contacts is one of the last remaining obstacles in order to improve the conversion efficiency of crystalline silicon solar cells. One of the most promising approaches are passivated carrier selective contacts which enable a selective charge carrier …
-
Sol-gel processed zinc oxide for third generation photovoltaics
… efficiency through the modification of the front contact/polymer interface using zinc oxide buffer layers. This improved the charge selectivity of the electrodes and energy level alignment at the interface while reducing the recombination of separated charges and the device's series …
-
Ανάπτυξη και ιδιότητες επαφών σε ηλεκτρονικές διατάξεις
… the development and the characterization of the front ohmic contact (window layer - metal contact) of such a solar cell device (ZnO / ZnSe / chalcopyrite / Mo / Glass). Specifically, intrinsic ZnO and Al such as In doped ZnO thin films were deposited on soda lime glass substrates by the pulsed …
-
Development and study of a dense array Concentration PhotoVoltaic (CPV) system
… of the cell soldering and the realization of front contact connections.
-
Investigating CdTe solar cell performance through glass/TCO selection and CdSe-based window layer engineering
… These results underscore the importance of front contact optimization and buffer layer engineering in advancing CdTe photovoltaic efficiency.
-
Processing of high efficiency silicon solar cells
… optimization of emitter diffusion and Cr/Cu front contact metallization. During three years, several hundreds of single and multicrystalline silicon wafers have been processed to solar cells. Best conversion efficiencies were 15,1 % (mc-Si), 16,4 % (c-Si) and 14,5 % (RTP mc-Si).
-
Advanced metallization for screen-printed solar cells
… 1) high metal shading; 2) high recombination at front contact regions and rear surface; and 3) parasitic light absorption at the rear surface. This thesis investigates methods to improve front and rear metallization to overcome these limitations and increase the cell efficiency. On the front …
-
ELECTRICAL AND OPTICAL CHARACTERIZATION OF GaAs NANOWIRE ARRAYS
… between NWs to support a low sheet resistance front contact and prevent shunts. An In/ITO contact was developed to achieve a lower contact resistance to n-GaAs NWs than an ITO contact, while it had a similar transmittance as ITO. A crack test also showed that insertion of a thin indium layer …
-
Incorporation of 3-Dimensional ZnO Nanowire Arrays in Bulk Heterojunction Solar Cells
… a method for incorporating a 3-dimensional front-contact extension composed out of ZnO nanowires in P3HT:PCBM bulk heterojunction solar cells as a way of further replicating the charge collection advantages of the pillared nano-morphology was investigated. This structure should increase …
-
Chemical and Electronic Structure of Surfaces and Interfaces in Cadmium Telluride Based Photovoltaic Devices
… The interface of a CdS buffer layer and SnO2:F front contact was investigated as a function of CdCl2-treatment. In order to measure the fully formed interface, after subsequent layer deposition and heat treatments, mechanical stressing of the layer stack resulted in physical separation at the …
Page 1 of 3