Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 64 for “"fuel distribution"”.
-
Increasing the efficiency level of loading operation in a fuel distribution plant
Este artículo tiene como objetivo solucionar el problema de ineficiencia, representado por el bajo nivel de servicio en el sistema de distribución de la planta de combustible, ya que se han presentado retrasos desde el inicio del proceso hasta el final de este. Por este motivo, se analizó todo el …
-
Liquid Hydrogen Fuel Distribution System Performance for Short Medium Range Civil Aircraft
… reduction is to use other options than fossil fuels, like liquid Hydrogen. This project is based on the Airbus model A321 as a twin-engine civil aircraft candidate. Liquid Hydrogen is in cryogenic condition (22K, 1.6bar), and it needs to be pumped during Maximum Take-Off (MTO) to a pressure of …
-
Optimal initial fuel distribution in a thermal reactor for maximum energy production
Using the fuel burnup as objective function, it is desired to determine the initial distribution of the fuel in a reactor in order to obtain the maximum energy possible, for which, without changing a fixed initial fuel mass, the results for different initial fuel and control poison configurations …
-
DEVELOPMENT OF SYSTEM-LEVEL REQUIREMENTS AND EFFECTIVENESS MEASURES FOR AN AMPHIBIOUS FUEL DISTRIBUTION SYSTEM
… of Effectiveness (MOE) for an amphibious fuel distribution system (AFDS) in the context of the expeditionary advanced base operations (EABO) concept. EABO entails small, distributed operations, under the threat umbrella of enemy detection and fires, with amphibious maneuvers initiated from …
-
Investigation of PPC in an Optical Engine : With focus on Fuel Distribution and Combustion Characterization
… combustion is a combustion concept where the fuel is often ignited during the injection event and while it gives a high combustion efficiency, the combustion mode is also characterized by high emission of NOx and soot. The transports also contributes to greenhouse gas emissions and to …
-
ANALYSIS OF FUEL DISTRIBUTION WITH ALLIED AND COMMERCIAL PARTNERS WITHIN THE INDO-PACIFIC AREA OF RESPONSIBILITY
… and trade-offs of integrating modular refueling technologies, such as the improved modular fuel delivery station (IMFDS) and modular consolidated cargo operation adapter kit (MCAK), across a spectrum of forces. The findings emphasize that network design and asset orchestration, rather …
-
Multicomponent Liquid and Vapor Fuel Distribution Measurements in the Cylinder of a Port -Injected, Spark -Ignition Engine
The engine results show that large-scale charge motion induced during intake is paramount to good mixing during intake and compression. High intake port velocity is important for initial droplet atomization, but does not guarantee complete mixing. Liquid wall impingement can lead to significant …
-
Fuel Preparation in the Cylinder of a Port-Injected, Spark Ignition Engine
Liquid fuel in the cylinder was found to be the primary cause of inhomogeneity in the fuel distribution and therefore a principal contributor to HC emission. Much more liquid enters the cylinder with open-valve injection than with closed-valve injection. For some conditions a significant amount of …
-
Development and Characterization of Direct Formic Acid Fuel Cell for Potable Power Applications
… Imaging (MRI) is used to determine the spatial distributions of water and fuel in the membrane and GDL's of operating DFAFC. MRI images taken with a 14.7 T imaging system, show that the fuel distribution with the operating fuel cell is non-uniform. Generally, there is more fuel in the bottom of …
-
Intake flow analysis of a pulsed detonation engine
… a primitive intake manifold system with a single fuel injector located approximately 10 feet upstream of the primary intake valve. Constant fuel mass flow rate at the injector end creates local variations in equivalence ratio throughout the PDE that may have significant impact on overall engine …
-
Flow visualization and experimental optimization of three inlet-side-dump liquid-fuel ramjet combustors
… optimum flame-stabilization dome lengths and fuel-injection locations. The results were in good agreement with the results from previous studies. The optimum dome lengths which provided good fuel distribution and steady mixing all had lengths between 0.31 D and 1.4 D. Fuel injection in a …
-
FUEL LOGISTICS PLATFORM REQUIREMENTS TO SUPPORT DISTRIBUTED MARITIME OPERATIONS IN THE INDO-PACIFIC AREA OF RESPONSIBILITY
This project focuses on determining the current fuel requirements of the force and comparing them against current organic and contracted capabilities, culminating in a recommended fuel distribution concept to move fuel into theater. Research includes a comparison of JP-5 and its previously …
-
OPTIMAL POSITIONING OF REMOTELY PILOTED FUEL BLADDERS TO SUPPORT DISTRIBUTED MARITIME OPERATIONS
… problem of optimally routing a remotely piloted fuel bladder (RPB) to effectively serve distributed maritime forces. In response to changes in the global threat environment, the U.S. Navy is developing new concepts that involve distributed surface forces operating in large threat areas over …
-
Movement of fuel ashore: storage, capacity, throughput, and distribution analysis
… problem is defined by a limited capacity to move fuel ashore from tactical and seabased assets, coupled with increasing rates of end-user consumption. In the absence of host-nation support, sustaining the MEB during operations ashore requires joint interoperability of several fuel distribution …
-
Neutronics analysis for cylindrical assembly using Green's functions
… the neutron flux, criticality condition, or distribution of material in the assembly. It is possible to obtain an analytic solution for the neutron flux for a reactor represented in cylindrical coordinates using a Green's function or Green's function matrix method for both one group and two …
-
Combustion efficiency in a dual-inlet side-dump ramjet combustor
A dual, axially-in-line, side-dump, liquid-fueled ramjet combustor was designed and tested with varying fuel-air ratios, atomizer types, and air distributions between the two inlets. Particle size distributions produced by the atomizers were measured at the inlet duct plane. When operated in a …
-
A methodology for the solution of nonlinear two-point boundary value inverse problems in physics and engineering
… buildup in a nuclear reactor, the optimal fuel distribution in a slab reactor and to solve the stationary Schrodinger equation, (b) computer simulation, to determine the heat transfer coefficients in a sodium to water heat exchanger, and (c) applied quantum physics, to design semiconductor …
-
Fully Burdened Cost of Fuel Using Input-Output Analysis
… 2009 mandates that the Fully Burdened Cost of Fuel, including the total cost of procuring and transporting fuel, infrastructure operating costs, and the cost of force protection for the logistics tail, be applied in trade-off analyses for all Defense systems that create a demand for energy. …
-
Quantifying vegetation structure and fire fuels in montane pine forests impacted by mountain pine beetle using remotely piloted aircraft system multi-spectral, photogrammetric and lidar technologies
… associated with Mountain Pine Beetle (MPB), dry fuels, and the potential for fire in the Athabasca and Miette Valleys is of significant concern to the park. Measuring forest fire fuels in the field is difficult and time-consuming, and field plots do not measure all the spatial variability of fuel …
Page 1 of 4