Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 119 for “"full scale test"”.

  1. Full Scale Test Case For Sailing Yacht Performance

    … investigates the possibilities of producing a full scale test case of the performance of sailing yachts. With such a test case, it is believed that instantaneous and absolute performance of sailing yacht evolving in real conditions can be investigated. An out-put of this study is the ability to …

    chalmers Repository record for Full Scale Test Case For Sailing Yacht Performance (opens in a new tab)

  2. Flow visualization techniques for full-scale test objects in a wind tunnel: Evaluation of a novel flow visualization technique

    … low complexity. ProCap measurements around a full-scale car in a commercial wind tunnel are compared against an existing pressure-based traversegear system and CFD simulations. The findings show that ProCap is not sufficiently accurate or consistent for CFD method validation, but can be a …

    chalmers Repository record for Flow visualization techniques for full-scale test objects in a wind tunnel: Evaluation of a novel flow visualization technique (opens in a new tab)

  3. A Comparison of Predicted Brace Loads in Temporary Retaining Structures and Observed Brace Loads in Two Full Scale Test Sections

    … the construction schedule, the geotechnical testing apparatus and instrumentation, and the data produced from the geotechnical instrumentation program. In this thesis, several theoretical approaches available for estimating the strut loads in braced excavations were examined and used to …

    uno Repository record for A Comparison of Predicted Brace Loads in Temporary Retaining Structures and Observed Brace Loads in Two Full Scale Test Sections (opens in a new tab)

  4. Fatigue life determination of a damage-tolerant composite airframe

    … proposed in this research extends the current full-scale test approach based on the life factor and the load enhancement factor, and provides information necessary to define inspection intervals for composite structures by studying the effects of extremely improbable, high-energy impact damage. …

    wichita-thes Repository record for Fatigue life determination of a damage-tolerant composite airframe (opens in a new tab)

  5. Some physical characteristics and exposure loss estimates of pea vine silage in a horizontal silo

    … were investigated by field observation on a full scale test silo. Density, dry matter, permeability and some proximate analyses of the silage are tabulated. Observed dry matter losses in order of magnitude are fermentation losses, sub surface losses, surface losses, and losses in runoff and …

    ubc Repository record for Some physical characteristics and exposure loss estimates of pea vine silage in a horizontal silo (opens in a new tab) Download PDF for Some physical characteristics and exposure loss estimates of pea vine silage in a horizontal silo (opens in a new tab)

  6. Assessment of Local Strains in Geomembranes at Gravel Indentations

    … on how the strains are calculated and what testing methods are used to obtain the deformed shape of the geomembrane. This involved the use of established test methods and apparatuses but using a 3D laser scanner to obtain the deformed shape and a recently developed theoretical technique to …

    queens Repository record for Assessment of Local Strains in Geomembranes at Gravel Indentations (opens in a new tab)

  7. Behaviour of ultra-high performance concrete as a joint-fill material for precast bridge deck panels subjected to negative bending

    … deck panels subjected to negative bending. Two full-scale test specimens were constructed. The transverse joints between the panels, the shear pockets, and the deck haunches were all filled with UHPC. A total of four tests were performed including two static tests to failure and two fatigue …

    manitoba Repository record for Behaviour of ultra-high performance concrete as a joint-fill material for precast bridge deck panels subjected to negative bending (opens in a new tab)

  8. Analysis and Design of a New Generation GFRP Wind Turbine Tower

    … reinforced polymer (GFRP) wind turbine tower for full scale prototype testing. The study includes the finite element analyses of different tower section configurations, the parametrical study of different variables, the selection of appropriate configuration and dimensions, and the finalization of …

    manitoba Repository record for Analysis and Design of a New Generation GFRP Wind Turbine Tower (opens in a new tab)

  9. A linear programming model for naval officer distribution

    … the technique, The author recommends that a full scale test problem be constructed with an activity configuration which resembles that of the current ODP in order to better estimate the value of this approach to officer personnel planning.

    nps Repository record for A linear programming model for naval officer distribution (opens in a new tab)

  10. EARTHQUAKE PERFORMANCE EVALUATION OF PVC PIPELINES WITH RESTRAINED JOINTS

    Full-scale test results to evaluate the earthquake performance of 6-in. (150-mm) PVC pipelines with restrained bell-and-spigot joints under water pressure of at least 80 psi (550 kPa) are summarized for material properties, axial joint tension and compression, four-point bending, and axial pullout …

    cornell Repository record for EARTHQUAKE PERFORMANCE EVALUATION OF PVC PIPELINES WITH RESTRAINED JOINTS (opens in a new tab)

  11. Fracture Characteristics of Asphalt Concrete in Mode I, Mode II, and Mixed-Mode

    Three mixtures from the full-scale test sections discussed above were used to develop and validate a new Mode II test for asphalt concrete. No previous literature was found that attempted to capture Mode II fracture energy in asphalt concrete, so a test was developed from an extensive review of …

    uiuc Repository record for Fracture Characteristics of Asphalt Concrete in Mode I, Mode II, and Mixed-Mode (opens in a new tab)

  12. NUMERICAL, ANALYTICAL AND EXPERIMENTAL STUDY OF THE THERMAL BEHAVIOUR OF INNOVATIVE ENERGY GEOSTRUCTURES

    … soil and open water. This study builds upon a full-scale EQW test installed in Delft, the Netherlands, which incorporated three distinct types of steel heat exchangers: (1) shallow loops and (2) add-on panels, both installed at a depth of 3 m, and (3) deep loops, positioned at a depth of 15 m. …

    milano Repository record for NUMERICAL, ANALYTICAL AND EXPERIMENTAL STUDY OF THE THERMAL BEHAVIOUR OF INNOVATIVE ENERGY GEOSTRUCTURES (opens in a new tab)

  13. Spatial Variability and Terminal Density -Implications in Soil Behavior-

    … an extensive field monitoring component. This full scale test lasts one year and includes four blasting events.

    gatech Repository record for Spatial Variability and Terminal Density -Implications in Soil Behavior- (opens in a new tab)

  14. Impact of added insulation on the hygrothermal performance of leaky exterior wall assemblies

    … The procedure involves the construction of a full-scale test hut exposed consecutively to climatic conditions representing winter and late spring, inside the environmental chamber. Two re-insulation strategies are studied, with three different air leakage patterns, and compared to an insulated …

    concordia Download PDF for Impact of added insulation on the hygrothermal performance of leaky exterior wall assemblies (opens in a new tab)

  15. In-situ mechanical behaviour of Huntly coal

    … of Huntly coal are investigated. Laboratory tests on core specimens and small scale in-situ pressuremeter testing are used to determine elastic properties and failure criteria of the coal and coal measure rocks. The in-situ stress field that exists in the Waikato basin and in particular in …

    auckland-ms Repository record for In-situ mechanical behaviour of Huntly coal (opens in a new tab)

  16. The Design of Daylight Transporting Systems for Deep Space Illumination

    … window opening on one side was constructed as a test cell. Inside, sensors were set up to allow light measurement at task level along the depth of the room. Light rays were deflected by the geometry of the ceiling cavity, through a number of internal reflections on the highly reflective film …

    vt Repository record for The Design of Daylight Transporting Systems for Deep Space Illumination (opens in a new tab)

  17. Laboratory and full-scale pavement sections testing for evaluating frost action in cold regions

    A comprehensive laboratory testing plan was conducted as part of this project to select two frost-susceptible soils for use in constructing three full-scale test strips. A total of 16 soils were obtained from various suppliers in NJ and were evaluated to determine their frost-susceptibility. The …

    rowan Repository record for Laboratory and full-scale pavement sections testing for evaluating frost action in cold regions (opens in a new tab)

  18. DEVELOPMENT OF ELECTRICALLY CONDUCTIVE ASPHALT PAVEMENTS FOR DEICING APPLICATIONS IN COLD REGIONS

    … to mixture with 30% graphite. Subsequently, full-scale test strips were constructed in New Jersey and Alaska using the ECA mixtures to further evaluate the deicing effectiveness and mechanical performance on a structural level. The deicing performance indicated that the ECA test strips could …

    rowan Repository record for DEVELOPMENT OF ELECTRICALLY CONDUCTIVE ASPHALT PAVEMENTS FOR DEICING APPLICATIONS IN COLD REGIONS (opens in a new tab)

Page 1 of 6