Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 76 for “"full-core"”.

  1. Time Dependent Full Core Coupled Multiphysics Analysis of Nuclear Thermal Propulsion Reactors

    A novel full-core multiphysics analysis framework for Nuclear Thermal Propulsion (NTP) Reactors is developed in this dissertation. To achieve the high specific impulses and thrust levels required for crewed space exploration missions NTP systems operate at very high temperatures, rely on complex …

    gatech Repository record for Time Dependent Full Core Coupled Multiphysics Analysis of Nuclear Thermal Propulsion Reactors (opens in a new tab)

  2. Developing a full core model of the North Anna Reactor using SCALE 6.2.3, NESTLE and MCNP 6.2

    … multigroup (few-group) neutron diffusion reactor core simulator code that utilizes the nodal expansion method (NEM). The primary aim of this study was to develop a full core (FC) T-NEWT/NESTLE calculation input model for the NA PWR using the North-West University Reactor Code suite (NWURCS) …

    nwu-za Repository record for Developing a full core model of the North Anna Reactor using SCALE 6.2.3, NESTLE and MCNP 6.2 (opens in a new tab)

  3. Detailed analysis of phase space effects in fuel burnup/depletion for PWR assembly & full core models using large-scale parallel computation

    … have become effectively sized to enable full core simulations using highly-detailed 3d mesh models. In this work, the capability for modeling 3d reactor models is researched with PENBURN, a burnup/depletion code that couples to the PENTRAN Parallel Sn Transport Solver and also to the …

    gatech Repository record for Detailed analysis of phase space effects in fuel burnup/depletion for PWR assembly & full core models using large-scale parallel computation (opens in a new tab)

  4. Modeling and Sensitivity/Uncertainty Analyses of ZED-2 Benchmark Experiments Using DRAGON, DONJON & SUSD3D

    … design, stacked vertically in the center of the core (K0 site) and surrounded by natural uranium fuel.</p> <p>The simulation of these experiments using the transport code DRAGON coupled with the diffusion code DONJON is presented. DRAGON is initially used to model two lattices and the full cores …

    mcmaster Repository record for Modeling and Sensitivity/Uncertainty Analyses of ZED-2 Benchmark Experiments Using DRAGON, DONJON & SUSD3D (opens in a new tab)

  5. The impact of homogenized cross-section correction mechanisms in OSCAR-4 as applied to SAFARI-1 research reactor

    … (nonlinear extensions) which aim to correct the full-core nodal calculation (mostly via corrections to the homogenised cross-sections) for typical errors induced during coarse-mesh homogenisation and group condensation. These schemes are intended to correct the nodal diffusion result as compared …

    nwu-za Repository record for The impact of homogenized cross-section correction mechanisms in OSCAR-4 as applied to SAFARI-1 research reactor (opens in a new tab)

  6. Initial implementation of the neutronics codes DRAGON and DONJON at the North-West University

    … codes openly available, and fuel assembly and full core models were developed. These models were based on the North Anna reactor. DRAGON was used in modelling and performing lattice neutronics calculations for the fuel assemblies of the North Anna reactor. DONJON was used in modelling and …

    nwu-za Repository record for Initial implementation of the neutronics codes DRAGON and DONJON at the North-West University (opens in a new tab)

  7. The x-ray edge in alkali metals and alloys, an ab-initio study

    … of environments and results are compared to full core Hartree Fock results and experiment. It is found that this methodology reproduces experimental results as accurately as the full core Hartree Fock theory. Correlation corrections are included using many body Raleigh Schrodinger …

    uiuc Repository record for The x-ray edge in alkali metals and alloys, an ab-initio study (opens in a new tab)

  8. The X-Ray Edge in Alkali Metals and Alloys: An Ab-Initio Study

    … of environments and results are compared to full core Hartree Fock results and experiment. It is found that this methodology reproduces experimental results as accurately as the full core Hartree Fock theory. Correlation corrections are included using many body Raleigh Schrodinger …

    uiuc Repository record for The X-Ray Edge in Alkali Metals and Alloys: An Ab-Initio Study (opens in a new tab)

  9. Neutronic analysis of pebble-bed cores with transuranics

    … variations. The development of several realistic full-core 3D models and validation of all modeling techniques used was a major part of this research effort. In addition, investigating design sensitivities helped identify the parameters of primary interest. The full-core 3D models representing the …

    tamu Repository record for Neutronic analysis of pebble-bed cores with transuranics (opens in a new tab)

  10. Power Transient in a CANDU Reactor

    … Rod System a CANDU Reactor was investigated. A full core simulation was done, to study the neutronic power transient following a change in coolant conditions.

    mcmaster Repository record for Power Transient in a CANDU Reactor (opens in a new tab)

  11. Reflector modelling of MTR cores making use of normalised generalised equivalence theory

    … present some challenges to the usual approach to full-core calculational models. Diffusion theory is standardly used in full-core calculations and is known to be inaccurate in regions where the flux is anisotropic, for example within the reflectors. Thus, special consideration should be given to …

    nwu-za Repository record for Reflector modelling of MTR cores making use of normalised generalised equivalence theory (opens in a new tab)

  12. Improved 3D modelling of CANDU reactors using transport-fitted diffusion coefficients

    To model the neutronic physics behavior of the core in CANDU pressure tube type heavy water reactors with natural-uranium fuel, two levels of calculations are required. Initially, lattice-level transport calculations are carried out to obtain, with high detail and accuracy, the flux distribution …

    uoit Repository record for Improved 3D modelling of CANDU reactors using transport-fitted diffusion coefficients (opens in a new tab)

  13. Low-Order Multiphysics Coupling Techniques for Nuclear Reactor Applications

    … from a 2D pin cell to a massively parallel 3D full core problem. Initially, JFNK was implemented only as an eigenvalue solver without any feedback enabled. However this led to greatly increased runtimes without any obvious benefit. When multiphysics problems were investigated with both JFNK and …

    utk-theses Repository record for Low-Order Multiphysics Coupling Techniques for Nuclear Reactor Applications (opens in a new tab)

  14. Investigation of sub-cell homogenization for PHWR lattice cells using superhomogenization factors

    To avoid the computational effort associated with full-core neutron transport calculations, full-core neutronics calculations for Pressurized Heavy-Water Reactors (PHWRs) are usually performed in diffusion theory using an approximate core model, whereby only two energy groups are utilized and …

    uoit Repository record for Investigation of sub-cell homogenization for PHWR lattice cells using superhomogenization factors (opens in a new tab)

  15. Monte Carlo methodologies for neutron streaming in diffusion calculations - Application to directional diffusion coefficients and leakage models in XS generation

    … multi-group diffusion calculations at core level. In this thesis, the Serpent 2 Monte Carlo reactor physics burnup calculation code is used in order to test a set of diffusion coefficient models, as well as neutron leakage methodologies at assembly level. The tests include novel …

    aalto Repository record for Monte Carlo methodologies for neutron streaming in diffusion calculations - Application to directional diffusion coefficients and leakage models in XS generation (opens in a new tab)

  16. Advanced online fuel reprocessing simulation for thorium-fueled molten salt breeder reactor

    … composition (when multiplication factor of the full-core model and the U-233 concentration in the fuel salt are invariant in time); (2) determining the effect of the fuel salt irradiation with online reprocessing on MSBR operations; and (3) estimating MSBR fuel cycle performance by computing the …

    uiuc Repository record for Advanced online fuel reprocessing simulation for thorium-fueled molten salt breeder reactor (opens in a new tab)

  17. Monte Carlo and Depletion Reactor Analysis for High-Performance Computing Applications

    … \stretch goal" to this is the ability to perform full-core depletion analysis and spent fuel isotopic characterization. This dissertation thus presents the research and development of a coupled Monte Carlo transport/isotopic depletion implementation with the Exnihilo framework geared for …

    utk-theses Repository record for Monte Carlo and Depletion Reactor Analysis for High-Performance Computing Applications (opens in a new tab)

  18. Multi-physics and technical analysis of high-temperature gas-cooled reactors for hydrogen production

    … accuracy. The following analysis focuses on the full-core problem and compares different aspects of the simulations, concluding that Moltres obtains reasonably accurate results. The final study on stand-alone neutronics describes Moltres results of Phase I Exercise 1 of the OECD/NEA MHTGR-350 …

    uiuc Repository record for Multi-physics and technical analysis of high-temperature gas-cooled reactors for hydrogen production (opens in a new tab)

  19. Three dimensional heterogeneous finite element method for static multi-group neutron diffusion

    Because current full-core neutronic-calculations use two-group neutron diffusion and rely on homogenizing fuel assemblies, reconstructing pin powers from such a calculation is an elaborate and not very accurate process; one which becomes more difficult with increased core heterogeneity. A …

    uoit Repository record for Three dimensional heterogeneous finite element method for static multi-group neutron diffusion (opens in a new tab)

  20. Modeling Integral Fuel Burnable Absorbers Using the Method of Characteristics

    <p>Modern core designs that utilize Westinghouse fuel technology employ the use of Integral Fuel Burnable Absorbers (IFBA) that consists of very thin coatings of boron absorber material on the fuel pellets. While IFBA has proven to be an effective burnable absorber, it does present a neutronics …

    ut-knoxville Repository record for Modeling Integral Fuel Burnable Absorbers Using the Method of Characteristics (opens in a new tab)

Page 1 of 4