Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 53 for “"gProms"”.
-
Dynamic Scheduling and Control of MEA Absorption Processes for CO2 Capture Using gProms
… and includes six PI controllers implemented in gProms v5.1. 80% of the energy cost requirements by post combustion carbon capture system (PCCCS) are for the solvent regeneration. Due to the fluctuation in the electricity demand, appropriate scheduling of the PCCCS can reduce operating costs …
-
Neural network based hybrid modelling and MINLP based optimisation of MSF desalination process within gPROMS: Development of neural network based correlations for estimating temperature elevation due to salinity, hybrid modelling and MINLP based optimisation of design and operation parameters of MSF desalination process within gPROMS
… state MSF process model is developed using gPROMS modelling tool embedding the NN based correlation. gPROMS provides an easy and flexible platform to build a process flowsheet graphically. Here a Master Model connecting (automatically) the individual unit model (brine heater, stages, etc.) …
-
Ανάλυση χαρακτηριστικών παραμέτρων λειτουργίας, ανάπτυξη λογισμικού παρακολούθησης και βελτιστοποίησης βαθμού απόδοσης μονάδων
… simulation and non-linear optimization software (gPROMS) has been applied. Three models have been simulated (simplified water-steam cycle detailed boiler complete plant) for steady state full load with success. At no point was the deviation greater than 5% compared to measured data. Optimization …
-
Model predictive control of industrial crystallisation processes
… balance model (PBM) was parameterised in gPROMS FormulatedProducts software (Siemens-PSE Ltd.) for the hexamine-ethanol crystallisation system, using kinetics reported by Myerson et al. (1986). Seeded batch crystallisation experiments were run to validate the model, and scope out suitable …
-
Simulation, optimisation and flexible scheduling of MSF desalination process under fouling. Optimal design and operation of MSF desalination process with brine heater and demister fouling, flexible design operation and scheduling under variable demand and seawater temperature using gPROMS.
… supporting correlations for physical properties. gPROMS software is used to develop the model which is validated against the results reported in the literature. The model is then used in further investigations. Based on actual plant data, a simple dynamic fouling factor profile is developed which …
-
Commercial-Scale Conversion of Algae to Biofuel
… ASPEN PLUS, the ASPEN Process Economic Analyzer, gPROMS, and AIMMS. The two most important findings from this model were that: (1) cultivation represented 90% of the total capital expense because of the massive fields required to grow the algae, and (2) extraction of the oil from algae had highly …
-
Modelling and Optimization of Conventional and Unconventional Batch Reactive Distillation Processes. Investigation of Different Types Batch Reactive Distillation Columns for the Production of a Number of Esters such as Methyl Lactate, Methyl Decanoate, Ethyl Benzoate, and Benzyl Acetate using gPROMS
… in the optimisation framework within gPROMS (general PROcess Modelling System) software. It is found that for the methyl lactate system, the i-SBD operation outperforms the classical batch operations (CBD or SBD columns) to satisfy the product constraints. While, for the methyl …
-
Optimal design and operation of multivessel batch distillation with fixed product demand. Modelling, simulation and optimisation of design and operation parameters in multivessel batch distillation under fixed product demand scenario and strict product specifications using simple dynamic model in gPROMS.
… with the multivessel system in both separations. gPROMS, a user-friendly, software is used for the modeling, simulation, and optimisation.
-
MSF process modelling, simulation and optimisation : impact of non-condensable gases and fouling factor on design and operation. Optimal design and operation of MSF desalination process with non-condensable gases and calcium carbonate fouling, flexible design operation and scheduling under variable demand and seawater temperature using gPROMS.
… the results reported in the literature using gPROMS software. The model is then used for further investigation. First, a steady state calcium carbonate fouling resistance model has been developed and implemented in the full MSF mathematical model developed above using gPROMS modeling tool. …
-
NOVEL DESIGN FOR PRODUCTION OF LIQUID FUELS WITH NEGATIVE EMISSIONS
… based mathematical model was developed in gPROMS modeling environment for the integrated HTGR/SMR process. The results for a large scale design of this system indicate that hydrogen rich syngas with H2/CO ratio in the range of 6.3 can be achieved. To meet the desired H2/CO ratio (around 2) …
-
Struvite crystallization from nutrient rich wastewater
… of struvite growth kinetic parameters using gPROMS.
-
Modelling and optimisation of oxidative desulphurization process for model sulphur compounds and heavy gas oil. Determination of Rate of Reaction and Partition Coefficient via Pilot Plant Experiment; Modelling of Oxidation and Solvent Extraction Processes; Heat Integration of Oxidation Process; Economic Evaluation of the Total Process.
… Optimisation problem is formulated using gPROMS modelling tool to optimise some of the design and operating parameters (such as reaction temperature, residence time and splitter ratio) of integrated process while minimising an objective function which is a coupled function of capital and …
-
Drying of Pharmaceutical Powders Using An Agitated Filter Dryer
… way. The model equations are implemented in gPROMS software and the models are applied to simulate the experiments carried out in the 5 L AFD. The vacuum contact drying experiments were also simulated using a DPM embedded in the gPROMS software. The modelling results of LPM were compared with …
-
Estimating Parameters for a Doyle Fuller Newman Model of a Graphite Half Cell Battery
… were put into a Doyle Fuller Newman model in gPROMs and the simulation output was compared to experimental discharge data. These estimates can be used as a starting point for fitting the model to experimental data to find a final set of parameters for the model.
-
Modelagem e simulação da câmara de reação de uma caldeira a carvão pulverizado
… Este modelo foi implementado no simulador gPROMS e seus parâmetros foram estimados utilizando o módulo gEST deste software (método da máxima verossimilhança), com base em dados de operação da Usina e dados cinéticos de literatura. Para a simulação dinâmica da câmara de reação foi utilizado …
-
Towards a Software Prototype for Synthesis of Operable Process Intensification Systems
… DWSIM® & ASPEN® for process simulation, and gPROMS® & MATLAB® for dynamic analysis, process operability, and process control. The capabilities of the prototype are demonstrated through a case study on the process design and intensification of pentene metathesis reaction/separation systems.
-
Modelling and Simulation of Carbon Dioxide Transportation in Pipelines: Effects of Impurities
… studied using simulation software; Aspen HYSYS, gPROMS and HydraFlash. The results show that all impurities impacted negatively on transportation. At equal concentrations, hydrogen had the greatest effect on fluid properties and hydrogen sulphide the least impact. At the specified allowable …
-
Feasibility of a solar panel-powered liquid desiccant cooling system for greenhouses
… of heat and mass transfer were modelled using gPROMS® advanced process modelling software. The model was validated against the experimental results. Consequently it was used to model a commercials-scale greenhouse in several hot coastal areas in the tropics and sub-tropics. These case studies …
-
Adsorptive Thermochemical Energy Storage and it’s Impacts on Space Heating
… The simulation was carried out by using gPROMS (general Process Modelling System) software. It incorporates single dimension heat and mass transfer equations where the radial changes along the column are neglected. The simulation uses the Guggenheim-Anderson-de Boer (GAB) isotherm model …
Page 1 of 3