Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 830 for “"gage"”.

  1. A Soil Stress Gage Evaluation.

    … evaluation of a recently developed soil-stress gage, primarily designed for laboratory use in dry cohesionless soils, is presented. Two variations of the same basic soil stress gage design are discussed. Tests were performed to evaluate the gage linearity, temperature sensitivity, and electrical …

    unm Repository record for A Soil Stress Gage Evaluation. (opens in a new tab)

  2. Light gage steel folded plates

    A light gage steel folded plate model structure was fabricated and tested under a uniform pressure to determine the relative stiffness of this type of structure. Deflections at mid and quarter spans were measured and compared with values determined by a rational method of analysis. A different …

    vt Repository record for Light gage steel folded plates (opens in a new tab)

  3. Rain Gage Network Design Using Neural Networks

    … algorithm to the problem of selecting candidate gages for removal from a rain gage network. A network is defined using a modified Hopfield neural network. The Hopfield architecture is modified by allowing node activations to assume the discrete values of either 1 (gage present) or 0 (gage …

    sdstate Repository record for Rain Gage Network Design Using Neural Networks (opens in a new tab)

  4. An investigation of the S/N fatigue gage

    The S/N Fatigue life gage is a device which resembles an ordinary metal fail atrain gage. Its distinguishing characteristic is that its electrical resistivity increase as a function of the cumulative cyclic strain history of the material to which it is bonded. This gage was introduced in September, …

    nps Repository record for An investigation of the S/N fatigue gage (opens in a new tab)

  5. Bore Waviness Measurement Using an In-Process Gage

    … parts are usually equipped with measurement gage heads having tactile probes. Until now, these in-process gages have been used to measure only the average diameter of the part. This research focused on the use of these tactile probes to measure bore waviness in precision-ground parts. The …

    gatech Repository record for Bore Waviness Measurement Using an In-Process Gage (opens in a new tab)

  6. Analysis of strain gage data from submarine MSW piping.

    … assessing the integrity of experimental strain gage data taken on piping in which gage rosettes are arranged in circumferential patterns at several sections of a piping system. The method of least squares is used to obtain "best" values for strain per unit loading for each gage element. This …

    nps Repository record for Analysis of strain gage data from submarine MSW piping. (opens in a new tab)

  7. An investigation of the S/N fatigue life gage

    The S/N fatigue life gage is a small sensor which is similar in appearance to a foil strain gage. The S/N fatigue life gage is bonded to the surface of a mechanical structure using standard strain-gage techniques. The S/N gage changes resistance permanently as a continuous function of fatigue …

    nps Repository record for An investigation of the S/N fatigue life gage (opens in a new tab)

  8. Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements

    … presented to wire, calibrate, and measure strain gages for rotor blade testing that will provide more information and is robust to individual gage loss. The additional information can be used in several ways. including reducing redundancy, offering rapid identification of damage locations, and in …

    odu Repository record for Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements (opens in a new tab)

  9. Characterization of stem rust resistance in wheat cultivar gage

    … its derivative races with additional virulence. ‘Gage’, a USDA-University of Nebraska developed hard red winter wheat cultivar, was released in 1963 mainly for its excellent field resistance to leaf rust caused by Puccinia triticina Eriks and stem rust which was superior to another stem rust …

    nebraska Repository record for Characterization of stem rust resistance in wheat cultivar gage (opens in a new tab)

  10. Floating head skin friction gage measurements in supersonic flows

    Two floating head skin friction gages have been designed and tested to directly measure the skin friction coefficient for the undefined flow in a SCRAM-jet engine. The skin friction gage designs contain a floating head that is supported by ball bearings which allow it to move in any horizontal …

    vt Repository record for Floating head skin friction gage measurements in supersonic flows (opens in a new tab)

  11. Dynamic Monitoring and Life Prediction of Internal Strain-Gage Balances

    … to monitor the health of a wind tunnel strain-gage balance has been developed. The objective of this methodology is to define the stress limits of the balance and monitor these limits so the balance can be safely tested without failure of the balance. A balance failure could result in costly …

    ut-knoxville Repository record for Dynamic Monitoring and Life Prediction of Internal Strain-Gage Balances (opens in a new tab)

  12. A study of the stud-welded vibrating wire strain gage

    … stability of a stud-welded vibrating wire strain gage. The lack of previously published information and the nature of the instrument required an origonal design. When undesirable conditions were noted, an attempt has been made to eliminate such conditions through a change in design of gage …

    rice Repository record for A study of the stud-welded vibrating wire strain gage (opens in a new tab)

  13. Interaction of Shear and Bending on Light Gage Steel Diaphragms

    … noted that, in recent years, the use of light gage steel has been increasing in construction. Civil engineers are beginning to recognize that many portions of a structural framework can participate as a unit in resisting all of the forces as well as local forces applied to single members. The …

    sdstate Repository record for Interaction of Shear and Bending on Light Gage Steel Diaphragms (opens in a new tab)

  14. A minicomputer-based system for the calibration of strain gage balances

    <p>Strain gage balances and angular position indicators are used to measure the aerodynamic loads acting on aircraft, missiles, and space vehicles during wind tunnel testing. A calibration of these balances and indicators furnishes data which represent the response of the devices to certain loads …

    ut-knoxville Repository record for A minicomputer-based system for the calibration of strain gage balances (opens in a new tab)

  15. Quantification of Pain Thresholds in Orthodontic Patients Using Strain Gage Techniques

    … A simple pressure algometer utilizing strain gages was produced to apply and measure the force required to reach the pain threshold of incisor teeth (central-lateral pairs) for three consecutive days. Fifteen orthodontic patients were used (nine females, six males) with incisors in good …

    iupui Repository record for Quantification of Pain Thresholds in Orthodontic Patients Using Strain Gage Techniques (opens in a new tab)

  16. Application of Deep Learning on Gage R&R for Anomaly Detection

    … models, to enhance anomaly detection within Gage Repeatability and Reproducibility (Gage R&R) studies—an essential component of Measurement System Analysis (MSA) in quality engineering. Traditional Gage R&R methodologies, while effective for linear and low-dimensional data, exhibit …

    etsu Repository record for Application of Deep Learning on Gage R&R for Anomaly Detection (opens in a new tab) Download PDF for Application of Deep Learning on Gage R&R for Anomaly Detection (opens in a new tab)

Page 1 of 42