Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"gain margin"”.
-
A nonlinear study of the gain margin of a third order regulator system
… after initial loss of stability. The effective gain of the system is used as the main bifurcation parameter, since this is directly related to the gain margin for linear systems. It is shown that the nonlinear characteristics of the system may significantly affect the practical significance of …
-
Controller Modeling and Stability Analysis of Multiple Input Single Output DC-DC Converter
… such as overshoot, undershoot, rise time, phase margin and gain margin were measured to evaluate and analyze the stability of the converter. These metrics were measured with the original model including the current sharing network that allows load sharing between multiple MISO modules. The …
-
Control Theory Oriented Analysis and Design of Optimisation Algorithms
… control theory, including the circle criterion, gain margin optimization, and the internal model principle, are employed to establish global convergence guarantees, identify fundamental performance limits, and develop algorithms that attain these limits. We begin by developing a gradient-based …
-
Modern Design of Classical Controllers
… described. When classical specifications such as gain margin, phase margin, bandwidth, and time-delay tolerance are imposed, the achievable performance can be easily determined graphically. The objective of this research is to determine the controller gains, contained in the stabilizing set, which …
-
Ultra Low Power Cap-Less LDO with Fast Startup
… and a Class AB second stage to provide high loop gain and faster response. It uses an active compensation feedback loop that stabilizes the LDO and regulates the output voltage during fast load transients. In order to save power based on the load conditions, the design uses two current detector …
-
Effects of observer dynamics on motion stability of autonomous vehicles
… variations in the heading angle control gain are studied. Particular emphasis is placed on analyzing the effects of observer design on system response after initial loss of stability of straight line motion. It is shown that the dynamics of the observer may have a significant effect on …
-
Stability analysis of a phase plane control system
… phase plane control robustness, stability margin prediction methods must be developed. While PWM has been used to predict stability margins, in this research, describing functions and absolute stability are extended to predict stability margins. Time domain simulations demonstrate all …
-
Adaptive resonant mode control for high frequency tonal noise
… controller requires no design iterations and the gain margin can be specified ahead of time (phase margin is always infinite). This controller differs from standard resonant control in that it acts directly on a disturbance rather than damping resonant poles of the system plant. This allows for a …
-
AUTOMATIC TUNING OF PROCESS CONTROLLERS : PRACTICAL APPROACHES
… analytical tuning formulas based on gain margin and phase margin are derived. These analytical formulas are particularly useful in the context of adaptive control and auto-tuning where the controller parameters have to be computed on-line. Unlike other analytical formulas, the desired …
-
Analysis and control of nonlinear vibration in inertial actuators
… significantly reduce the closed-loop gain margin by exploiting regions of potential instability that are present in the underlying linear closed-loop system. Therefore, the relationship between the actuator nonlinearities and the closed-loop stability depends on the choice of …
-
A Low-Cost Loop Measurement Tool for DC-DC Converters
… ability of the proposed tool to perform phase margin, gain margin, and cross-over frequency measurements of DC-DC converters. These results are then shown to be comparable with those obtained from a network analyzer. The procedure used to perform loop measurements with the proposed tool will be …
-
Stability and Performance for Two Classes of Time-Varying Uncertain Plants
… tracking. Our second class is a time-varying gain margin problem: we consider an reasonably general, uncertain, time-varying function at the input of an otherwise linear time invariant nominal plant. In this second context, we consider the tracking problem wherein the signal to be tracked is …
-
Stability and Performance Comparisons of Infinite Impulse Response Digital Filters with Rounded Coefficients
… of the proposed filter, a calculation of the gain and phase margin, a calculation of the filter's bandwidth and ripple, and plots of filter performance. The program also determines the maximum amount of rounding the filter coefficients will tolerate before driving the system to instability, …
-
Genetic design of robust predictive control systems
… to conventional robustness measures such as Gain-margin, Phase-margin, Delay-margin and Modulus-margin, which make them suitable for comparison with conventional PID type controllers.The application of Evolutionary Algorithms to process control systems constitutes a new methodology within the …
-
Adaptive controller design for Internet traffic: A control theoretical approach
… in network parameters have caused the phase margin or the gain margin of the AQM control system to drift outside a specified interval. Using the same control theoretical framework, we have provided different controllers to support best-effort streaming media traffic under different network …
-
Rotor speed control for a demonstrator helicopter engine
… design goals were selected to include a phase margin in excess of 45°, gain margin of 6 dB, and steady-state accuracy within 15%. The uncompensated plant was analyzed first and different types of simple compensation were selected to fulfill the design goals. A second order notch filter was …
-
PID CONTROL : PERFORMANCE AND ROBUSTNESS
… an approximation of the industrial process. Gain margin and phase margin are traditional measures of robustness. Designing a PID controller to meet gain and phase margin specification is a well-known design technique. If the gain and phase margin are not specified carefully then the design …
-
Communication Protocol Design Considerations For Highway Vehicle Platoons And Enhanced Networked Robustness By Stochastic Dithers
… is introduced to enhance feedback robustness against communication gain uncertainties. The method employs a fundamental property in stochastic differential equations to add a scaled stochastic dither under which tolerable gain uncertainties can be much enlarged, beyond the traditional …
-
PID controller tuning methods for process industry applications
… Iterative Feedback Tuning. For a given range of gain and phase margins, graphical methods are developed that show the viable gain margin and phase margin design pairings that are achievable by the use of a PI controller as the compensation element in a closed loop control system. Two further …
Page 1 of 2