Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"gear-box"”.

  1. Two Techniques For Improving Renewable Energy Performance: Fast Charging Of Li-Ion Batteries And Electrostatic Filtration Of Wind Turbine Gear Box Oil

    … and competitiveness. Although wind turbines have gearboxes that offer well-known benefits, they also pose a potential source of failure. Lubrication plays a vital role for wind turbine gearboxes, and its contamination and degradation is one of the main reasons for wind turbine failure. To solve …

    nodak Repository record for Two Techniques For Improving Renewable Energy Performance: Fast Charging Of Li-Ion Batteries And Electrostatic Filtration Of Wind Turbine Gear Box Oil (opens in a new tab)

  2. Control of drive trains incorporating magnetic gears

    This is a thesis about the control of magnetic gears. A decade ago (2001) the first modern prototype magnetic gear box was constructed using rare earth magnets (NdFeB). Magnetic gear boxes have some desirable properties not found in their mechanical gear box counterparts, these include: …

    whiterose Download PDF for Control of drive trains incorporating magnetic gears (opens in a new tab)

  3. Fatigue-Induced Failure in Horizontal-Axis Wind-Turbine (HAWT) Blades and HAWT Drivetrain Gears

    … Wind Turbines (HAWTs). Turbine blades and the gearbox are perhaps the most critical components/subsystems in the present designs of HAWTs. The combination of high failure rates (particularly those associated with turbine-blades and gear-boxes), long downtimes and the high cost of repair remains …

    clemson Repository record for Fatigue-Induced Failure in Horizontal-Axis Wind-Turbine (HAWT) Blades and HAWT Drivetrain Gears (opens in a new tab)

  4. Designing and modeling a split torque hydrostatic transmission in series with a manual transmission for an automotive application

    … Transmission (HHT). HHT consists of a manual gear box that is mounted in series with a split torque device. The output from the power split device delivers power to the two power paths then combines again via a downstream spur gear. A Proportional-Integral control was designed to make the …

    missouri Repository record for Designing and modeling a split torque hydrostatic transmission in series with a manual transmission for an automotive application (opens in a new tab)

  5. Investigation of a wave energy converter with a flywheel and a corresponding generator design

    … to a ywheel with a rotational inertia, a gear box and finally a generator. The whole system, except for the buoy, is placed at the bottom of the sea. A 3 meters high and 5 seconds long wave together with an assumed current density for the generator, gives the input data for the generator …

    chalmers Repository record for Investigation of a wave energy converter with a flywheel and a corresponding generator design (opens in a new tab)

  6. An analysis of an interlock mechanism for small running skyline yarders

    … yarder which utilizes an automotive-type bevel gear differential. It proposes to place this differential inside the haulback drum, which also acts as a gear box/oil bath. A hydrostatic transmission is used to control the speed ratio across the differential. The resulting interlock permits the …

    ubc Repository record for An analysis of an interlock mechanism for small running skyline yarders (opens in a new tab) Download PDF for An analysis of an interlock mechanism for small running skyline yarders (opens in a new tab)

  7. Modeling and Tuning of CVT Systems for SAE® Baja Vehicles

    … transmitting power while offering a variable gearing ratio. The difference lies in the CVT’s ability to change ratio continuously between a minimum and maximum without halting power transfer. They offer many benefits of an automatic transmission while being significantly lighter. For this …

    wvu Repository record for Modeling and Tuning of CVT Systems for SAE® Baja Vehicles (opens in a new tab)

  8. Dynamics and control of fast automated guided vehicles for high load applications.

    … comprises the effect of actuators, differential gear box, steering and tractive gear boxes. The model is validated through simulations and comparison with other models. A dynamic-based approach to the control of a typical transport interfactory AGV in a semi structured environment is studied. The …

    ottawa-retro Repository record for Dynamics and control of fast automated guided vehicles for high load applications. (opens in a new tab)

  9. Acquisition, design modification, assembly, and ground test of NPS Hummingbird remotely piloted helicopter

    … rotor head assembly and tailboom with tail rotor gear box and rotor. The task undertaken by this thesis was to fabricate one complete fully operable RPH and to design, fabricate and install whatever new assemblies that were required for its NPS mission and to make up for deficiencies in the …

    nps Repository record for Acquisition, design modification, assembly, and ground test of NPS Hummingbird remotely piloted helicopter (opens in a new tab)

  10. The reliability optimization of mechanical systems using metaheuristic approach

    … its application to the reliability design of gearbox. The problems involve the selection of components with multiple choice and redundancy levels that produce maximum benefit, and are subject to the cost and weight constraints at the system level. These are very common and realistic problems …

    ets-quebec Download PDF for The reliability optimization of mechanical systems using metaheuristic approach (opens in a new tab)

  11. Analysis of a fuel cell-internal combustion engine series hybrid vehicle

    … cell, power bus, electric motor, generator and gear box. Modifications were made to the default series control logic and Matlab sub-routines were written to plot the fuel use data from the simulation. Various degrees of hybridization (in increments of 10% power from fuel cell) from conventional …

    unlv Repository record for Analysis of a fuel cell-internal combustion engine series hybrid vehicle (opens in a new tab) Download PDF for Analysis of a fuel cell-internal combustion engine series hybrid vehicle (opens in a new tab)

  12. Optimised parametric gear system design.

    … author on the development of methods of optimum gear design and shaft design for gear boxes, and the integration of the methods into one software package together with parametric layout drawing. The objective of the optimum gear design is to minimise the gear centre distance with a fixed aspect …

    sheffield-hallam Download PDF for Optimised parametric gear system design. (opens in a new tab)

  13. Molecular characterization of several genes involved in gluconate transport and phosphorylation, and induction of the gluconate peripheral pathway in Escherichia coli

    … region contains a CAP binding site and a gear box, a stationary-phase induced promoter. The gntT gene is monocistronic, coding for a gluconate transport protein with a molecular weight of 48.07 kDa. Northern blot analysis indicate that gntT is transcribed from a single gluconate inducible …

    nebraska Repository record for Molecular characterization of several genes involved in gluconate transport and phosphorylation, and induction of the gluconate peripheral pathway in Escherichia coli (opens in a new tab)

  14. Mounting System Design for Drive Trains of Hybrid Electric Vehicles

    … between Internal Combustion Engine (ICE) and Gear Box (GB). The resulting Hybrid Electric Drive Train (HEDT) differs from the original one with respect to mass distribution, inertia moments and cg position, for example, thus requiring an adaptation of the mounting system in order to maintain a …

    chalmers Repository record for Mounting System Design for Drive Trains of Hybrid Electric Vehicles (opens in a new tab)

  15. Modelling Strategies to Examine the Influence of Fidelity Levels on Dynamic Behavior of Multi-MW Wind Turbine Gearbox

    … related to immature failure of wind turbine gearboxes. In most cases, these failures are traced back to gears and bearing malfunctions, such as gear micro-pitting and bearing skidding. Previous studies suggest that transmission of transverse and bending loads from the rotor to the gearbox can …

    clemson Repository record for Modelling Strategies to Examine the Influence of Fidelity Levels on Dynamic Behavior of Multi-MW Wind Turbine Gearbox (opens in a new tab)

  16. Nano Oil Additives And Their Effect On UH-60 Auxiliary Power Unit Performance

    … oils were tested in an AH-64 Apache Intermediate Gear Box (IGB). Testing was conducted on two separate test stands, one applying torque through an absorption motor and one where no torque load was applied. These tests provide additional data for determining the effects of friction by measuring …

    south-carolina Repository record for Nano Oil Additives And Their Effect On UH-60 Auxiliary Power Unit Performance (opens in a new tab)

  17. Development, optimization and simulation of hybrid electric heavy duty truck with self-propelled trailer.

    … engine, electric motor, batteries, automatic gear box, clutch and final drive unit. The model has been developed using the specifications of commercially available sub-components. IV The braking energy analysis for different standard driving cycles has been conducted to demonstrate the …

    uoit Repository record for Development, optimization and simulation of hybrid electric heavy duty truck with self-propelled trailer. (opens in a new tab)

  18. Modelling, control and investigation of an HVDC transmission for an offshore wind farm

    … induction generator, the non-stiff shaft with a gear-box and the wind energy conversion is derived and is implemented in MATLAB/Simulink and PSCAD/EMTDC. In the next step, a control strategy based on the induction machine V/Hz control principles is derived which is aimed to maximize the …

    chalmers Repository record for Modelling, control and investigation of an HVDC transmission for an offshore wind farm (opens in a new tab)

Page 1 of 3