Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"generated voltage"”.

  1. Coherence study of geomagnetic fluctuations in frequency range .04 - 0.6 Hz between remote land sites

    … at two land sites separated by 4 km. Computer generated voltage vs time and magnetic field vs time plots failed to reveal the presence of dominant micropulsations . A coherence study between the two sites revealed coherence values of 0.6 - 0.8 in the frequency range 0.04 - 0.6 Hz. This is …

    nps Repository record for Coherence study of geomagnetic fluctuations in frequency range .04 - 0.6 Hz between remote land sites (opens in a new tab)

  2. Comprehensive Study of Energy Capturing, Conversion, and Transportation Behaviors in a Piezoelectric Vibration Energy Harvesting System

    … of the proof mass effect indicated that the generated voltage linearly increased with the weight ratio of the proof mass over the FPEH while the resonance frequency linearly decreased with the square root of the mass ratio. The resonant electrical impedance behaviors were studied through both …

    odu Repository record for Comprehensive Study of Energy Capturing, Conversion, and Transportation Behaviors in a Piezoelectric Vibration Energy Harvesting System (opens in a new tab)

  3. The dynamic analysis and control of a self-excited induction generator driven by a wind turbine

    … driven by a variable speed wind turbine. The voltage build up process of an isolated induction generator excited by AC capacitors starts from charge in the capacitors or from a remnant magnetic field in the core. A similar voltage build up is obtained when the isolated induction generator is …

    unsw Repository record for The dynamic analysis and control of a self-excited induction generator driven by a wind turbine (opens in a new tab)

  4. Metamedžiaga su integruota energijos surinkimo funkcija aukštiem dažniams /

    … was adopted – the ratio between the harvester generated voltage and power density. The best result was shown in single harvester using HE polarization 41,8 V∙m¬2/W, and the best result of 103 V∙m¬2/W was demonstrated for harvester 3 x 1 array when the harvesters were placed one after another. …

    vilnius Repository record for Metamedžiaga su integruota energijos surinkimo funkcija aukštiem dažniams / (opens in a new tab)

  5. 1.1V Supply Vth based CMOS voltage reference and analog multiplier for low power applications

    … next-generation power-efficient applications. A voltage-reference is widely used in integrated circuits to generate an on-chip reference voltage. The generated voltage-reference is used for building blocks like analog-to-digital converter (ADC) and digital-to-analog converter (DAC). Because …

    texas Repository record for 1.1V Supply Vth based CMOS voltage reference and analog multiplier for low power applications (opens in a new tab)

  6. Utility interface design for distributed renewable energy sources

    … solar energy, which are used to generate DC voltage. It is proposed to exploit this energy to create AC power, which is then fed into the utility. Besides, this energy could also be used to independently power some low-rated installations (a sixty-Watt light bulb is being used in our case). …

    ttu Repository record for Utility interface design for distributed renewable energy sources (opens in a new tab)

  7. Printable thermoelectric devices for energy harvesting

    … TEG with 4 thermocouples was presented with a generated voltage of 23 mV and an output power of 194 nW when ΔT=20°C. Moreover, a dispenser printed structured TEG was also demonstrated for its ability to achieve 3D structured thermocouples with a thickness of 500 µm.<br/><br/>The objective of …

    soton Download PDF for Printable thermoelectric devices for energy harvesting (opens in a new tab)

  8. Advanced Active Output Filter for Low Acoustic Noise Adjustable Speed Drive (ASD) System

    … by mitigating the pulse-width modulation (PWM) generated voltage/current harmonics in the audible noise range. However, the bulky passive filters contribute to additional volume and cannot effectively eliminate harmonics at low switching frequency. In this thesis, an active output filter (AOF) …

    tamu Repository record for Advanced Active Output Filter for Low Acoustic Noise Adjustable Speed Drive (ASD) System (opens in a new tab)

  9. Voltage and frequency regulation of a stand-alone self-excited induction generator with an unregulated prime mover

    … However, the magnitude and the frequency of the generated voltage depend upon the rotor speed, the amount of capacitive excitation, and the load in stand-alone systems with unregulated prime movers. A common approach for providing regulated voltage and frequency to the load is the use of an …

    concordia Download PDF for Voltage and frequency regulation of a stand-alone self-excited induction generator with an unregulated prime mover (opens in a new tab)

  10. Characterization of a piezoelectric transformer plasma source

    … with a small aperture in the center the generated output voltage is larger than the applied voltage. Near the resonant frequency, the voltage step-up ratio can be very large. The large induced RF voltage in the aperture results in ionization of gas to produce plasma due to the high …

    missouri Repository record for Characterization of a piezoelectric transformer plasma source (opens in a new tab)

  11. Precision in Traffic Monitoring : Harnessing Piezoelectric Sensors for Tire Analysis and Vehicle Classification

    … the induced mechanical strains on the sensors generated voltage outputs that provided detailed tire information. A machine-learning model was developed to categorize trucks based on distinct signal patterns. The simulated behavior of the EPDM strip integrated with sensors yielded essential …

    msu Repository record for Precision in Traffic Monitoring : Harnessing Piezoelectric Sensors for Tire Analysis and Vehicle Classification (opens in a new tab)

  12. Skärmning av benledare B250 vid hörselundersökningar - En utvärdering av passiva och aktiva skärmningsmetoder för möjliggörandet av pålitliga mätningar vid benledd hjärnstamsaudiometri för 250 Hz.

    … When using bone-conducted sound, magnetic fields generated by the bone conductor interfere with the electrode measurements, and therefore air-conducted sound is primarily used. The purpose of this study is to present a method for shielding these aforementioned magnetic fields, particularly those …

    chalmers Repository record for Skärmning av benledare B250 vid hörselundersökningar - En utvärdering av passiva och aktiva skärmningsmetoder för möjliggörandet av pålitliga mätningar vid benledd hjärnstamsaudiometri för 250 Hz. (opens in a new tab)

  13. Study on piezoelectric energy generation under high frequency excitation

    … device is considered to accurately calculate the generated voltage from the piezoelectric patch during operation. Inspired by frictional contact during the braking process between the rotor and frictional layer, a shear mode PEG is proposed to explore its performance under self-excited …

    manitoba Repository record for Study on piezoelectric energy generation under high frequency excitation (opens in a new tab)

  14. Nanoscale Thermoelectrics: A Study of the Absolute Seebeck Coefficient of Thin Films

    … Seebeck coefficient is defined as the amount of voltage generated by a thermal gradient. Measuring a thermally generated voltage by traditional methods gives, V = (Ssample - Slead)ΔT. If accurate values of, Slead, are available, simple subtraction provides the answer. This is rarely the case in …

    denver Repository record for Nanoscale Thermoelectrics: A Study of the Absolute Seebeck Coefficient of Thin Films (opens in a new tab)

  15. Integrated Actuation And Energy Harvesting In Prestressed Piezoelectric Synthetic Jets

    … as a response variable. Furthermore, energy generated by the system oscillations is harvested with a prestressed composite and a piezo-polymer. Using response surface methodology the process is optimized under different temperatures and pressures to simulate harsh environmental conditions. …

    vcu Repository record for Integrated Actuation And Energy Harvesting In Prestressed Piezoelectric Synthetic Jets (opens in a new tab)

  16. Low Frequency Microscale Energy Harvesting

    … decreases. Electromagnetic induction is another voltage generation mechanism that has been utilized for VEH. However, the electromagnetic induction based VEH is limited by the magnet and coil size and the decrease in power density at the micro scale. Hybrid energy harvesting is a novel concept …

    vt Repository record for Low Frequency Microscale Energy Harvesting (opens in a new tab)

  17. Ferroelectret nanogenerator (FENG) for mechanical energy harvesting and self-powered flexible electronics

    … device shows that the magnitudes of the generated voltage and current signals are doubled each time the device is folded, and an increase with magnitude or frequency of the mechanical input is observed. The developed FENGs is sufficient to light twenty commercial green and blue …

    msu Repository record for Ferroelectret nanogenerator (FENG) for mechanical energy harvesting and self-powered flexible electronics (opens in a new tab)

  18. Global Nonlinear Analysis of Piezoelectric Energy Harvesting from Ambient and Aeroelastic Vibrations

    … is investigated. The power levels that can be generated from these vibrations and the variations of these levels with the freestream velocity are determined. A mathematical model that accounts for the coupled lift force, cylinder motion and generated voltage is presented. Linear analysis of the …

    vt Repository record for Global Nonlinear Analysis of Piezoelectric Energy Harvesting from Ambient and Aeroelastic Vibrations (opens in a new tab)

  19. Innovative Control And Modulation Methods Exploiting Logic-Equations For Novel Multilevel Converter Topologies

    … multilevel converters to reduce the voltage diversity and stored energy of the flying-capacitors within switching-power-cells in order to improve the multilevel converter integrity and modularity. Chapter III provides general solutions for nonlinear transcendental equations of the …

    clemson Repository record for Innovative Control And Modulation Methods Exploiting Logic-Equations For Novel Multilevel Converter Topologies (opens in a new tab)

  20. Thermally Driven Spin Transport in Ferromagnetic Metals

    … angle via the inverse spin hall effect (ISHE). A voltage signal is generated since the nonmagnetic material converts the spin current into a charge current in the direction orthogonal to both the spin current and spin polarization directions. Ferromagnetic (FM) metals can also convert the spin …

    denver Repository record for Thermally Driven Spin Transport in Ferromagnetic Metals (opens in a new tab)

Page 1 of 2