Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 150 for “"gleeble"”.
-
Superalloy Metallurgy a Gleeble Study of Environmental Fracture in Inconel 601
… properties with unexpected early failure. The Gleeble is a valuable tool for investigation and simulation of thermo-mechanical properties of an alloy in various regimes up to the threshold of melting. In this study, four regimes of temperature and strain rate were simulated in an argon …
-
Estudo das deformações em ensaio de compressão plana no simulador físico Gleeble
… valores de deformação programados via simulador Gleeble nos corpos de prova envolvidos nos ensaios.
-
Simulation of hot-rolled advanced high strength sheet steel production using a Gleeble system
Includes bibliographical references (pages 141-149).
-
A Quantitative Study of the Weldability of Inconel 718 Using Gleeble and Varestraint Test Methods
… 718 was tested and compared to Haynes 230 using Gleeble and Varestraint mechanical test methods. Hot cracking susceptibility was examined in either alloy using a sub-scale Varestraint test method at 5 augmented strain levels: 0.25%, 05.%, 1%, 2%, and 4%. Maximum crack length, total crack length, …
-
The Viability of using a Gleeble for Physical Simulation of High Frequency Induction Welded TRIP 690 AHSS
… process in thin sheets of TRIP 690 AHSS using a Gleeble 3500 thermomechanical simulator. The results of this work demonstrated that the Gleeble could reproduce the microstructure across the bond line and heat affected zone of the HFIW produced welds. Mechanical characterization of the welds …
-
Characterization of Inconel 718: Using the Gleeble and Varestraint Testing Methods to Determine the Weldability of Inconel 718
… to actual fabrication. These are the Gleeble hot-ductility test and the Variable-Restraint (Varestraint) weld test. Varestraint samples were prepared as per standard preparation techniques and tested longitudinally with a GTAW. At a predetermined location a strain was applied …
-
Mathematical modelling of the high temperature constitutive behaviour of as-cast AA5182 aluminum alloy
… compression-tension tests were done using the Gleeble 1500 thermomechanical simulator at the University of British Columbia to measure the constitutive behaviour in an as-cast AA5182 aluminum alloy. The temperatures (i.e., 250-500°C) and strain rates (1E-5 – 1s⁻¹) used for the tests were chosen …
-
An Investigation into the Austenite Decomposition Behaviour and Post-Forming Tempering Response of Two 1800 MPa Grades of Press Hardening Steels
… of bainite, martensite, and ferrite. The Gleeble experiments were simulated using LS-Dyna and a thermal-mechanical-microstructural model. In the second investigation (Part II – Short Cycle Tempering), both steels were fully quenched in the Gleeble to produce a fully martensitic …
-
Effect of Manganese (Mn) Content and Homogenization Treatment on Hot Deformation of AA3xxx Aluminum Alloys
… deformation of the alloys was conducted using Gleeble 3500 machine, under plane strain conditions up to a final strain of 0.5. The deformation strain rate was selected as 0.1, 1.0 and 10 s-1, and deformation temperature was ranged between 300-500°C with 100°C temperature steps. Using the flow …
-
Fragilidade a têmpera em aços SAE 5160
… e tratamentos térmicos especiais realizados na Gleeble 1500. Com o tratamento térmico convencional microestruturas martensíticas e bainítica foram obtidas. Para os aços martensíticos as temperaturas de austenitização variaram entre 830 e 1100 oC com o revenido variando entre como temperado até …
-
An electron fractography (SEM)investigation of heat-affected zone in the newly developed Climax low-carbon Mn-Mo-Nb Steel
… zone in this new steel was investigated via the Gleeble technique. The grain refined region of the heat-affected zone showed excellent toughness at impact test temperatures of as low as -60°F, the upper-shelf extending to about -25°F. The grain coarsened region showed inferior toughness, …
-
Evaluation of the hot cracking sensitivity of 316 NG, 347 and 304 stainless steels using the hot ductility test and the modified subscale varestraint test
… The hot ductility test was conducted on the Gleeble using standard parameters.</p> <p>Both, the varestraint test and Gleeble test were utilized to evaluate the hot cracking susceptibility of base metal HAZ in austenitic stainless steels. In addition, the fusion zone and weld metal HAZ …
-
A study of directionally solidified Rene 80 subjected to short-term overtemperature
… overtemperature on Rene 80 DS were studied using Gleeble thermo-mechanical simulation apparatus. Volume fraction of gamma prime to gamma matrix was quantified and used to assess the effects of time, temperature and stress. Volume fraction was found to decrease with increasing temperature and time. …
-
Characterization of the cooling and transformation of steels on a run-out table of hot-strip mill
… of the model predicted cooling conditions on a Gleeble high temperature testing machine showed that the transformation was occurring at approximately 730°C. The empirical transformation start time, obtained from cooling rate versus transformation start time tests, which was used in the phase …
-
The effect of non-metallic particles on as-cast austenitic structure of low carbon steel
… cooling and helium quenching were performed on a Gleeble 1500 Thermo mechanical Simulator. Two low alloy types of steel were used; both had basically the same basic chemical composition, but contained different amounts of titanium and calcium. The as-cast austenite grain size was characterized in …
-
HIGH-TEMPERATURE PHYSICO-MECHANICAL PROPERTIES OF AS-RECEIVED STRUCTURES IN DUAL-PHASE ADVANCED HIGH-STRENGTH STEELS
… ends, high-temperature tensile tests using a Gleeble thermomechanical simulator have been conducted to determine the stress/strain behaviour at temperatures between 1250 to 1480 C in order to quantify the tensile strength and ductility. The results of both as-cast and transfer-bar material …
-
An Experimentally Generated Constitutive Model for Peak Stress (σ_peak) in Compression Samples
… by hot-compression deformation tests on the Gleeble 1500 thermo-mechanical simulator at true strain values of -0.143 and -0.405, true strain rate values of 0.01 and 0.1, and working temperatures of 900°C and 1000°C. The tests show that a lower working temperature and lower true strain value …
-
Effect of Preheating Condition on Strength of AA6060 Aluminium Alloy for Extrusion
… were conducted by hot compression testing (Gleeble test), to measure the combination of strengthening effects during deformation at elevated temperatures. The room temperature tests have shown that hardness, yield strength (YS) and ultimate tensile strength (UTS) are minimised at …
-
Weldability and Liquid Metal Embrittlement Susceptibility of Martensitic Ultra-High Strength Steels
… using hot ductility testing (HDT) conducted on a Gleeble thermo-mechanical simulator. Detailed analysis of the lath martensitic microstructure was performed, and it was found that there is a correlation between the microstructure and the observed LME response. It was discovered that the three MS …
-
Microstructure evolution during extrusion of AA3xxx aluminum alloys
… on the recrystallization behavior. In addition, Gleeble tests were conducted on a low iron AA3102 alloy using a Gleeble 3500 Thermo-mechanical Simulator at strain rates of 0.1s-1, 1s-1 and 10s-1 and deformation temperature of 400oC, 500oC, and 600oC. The yield stress, work hardening and flow …
Page 1 of 8