Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 155 for “"gold electrode"”.
-
Gold electrode electrochemistry in protein based solar cells
… transfer the photo-generated charges to the electrodes upon illumination. So far such protein-based devices have shown low overall power conversion efficiency. Previously it has been shown that slow charge transfer limits the efficiency of these devices. Moreover, it has been observed that …
-
Development of a Nerve Cell Interface Using Gold Electrode Array and PDMS
… cell interface using biocompatible substrate and electrodes: Poly(dimethylsiloxane) (PDMS) and Gold. The PDMS substrate has a cylindrical groove on the center of the top surface for placement of a nerve cell root, and the Gold electrode array is fabricated across the groove. To deposit Gold …
-
Electroreductive Desorption of Alkanethiols on Metal Surfaces Using In-situ Second Harmonic Generation
… Coupling with cyclic voltammetry (CV), the electrodesorption of three alkanethiols was observed for a gold and copperUPD-gold electrode. The SH response, as a function of potential, was sensitive to changes at the electrode surfaces as alkanethiols were reductively desorbed. After 30 CV …
-
Using Electrochemical Method to Study the Interaction Between DNA and a compound Known to Have Anticancer Property.
… acid (DNA) had been studied on a modified gold electrode by self-assembled monolayer using cyclic voltammetry. K4Fe (CN)6 was used as a probe to obtain electrochemical information on the electrode surface.A bare gold (Au) electrode was modified with cysteamine and our results showed no …
-
Modified Electrodes for Amperometric Determination of Glucose and Glutamate Using Mediated Electron Transport
… oxidizable by the heterogeneous reaction at the electrode surface. ISAMs were then assembled on a 2 mm gold electrode and on a gold fiber microelectrode using FePAA and glucose oxidase. Using cyclic voltammetry, these ISAMs were shown to be able to oxidize glucose in solution. The LOD was …
-
Light emission from microstructured tunnel junctions
… tunnel junctions of aluminum-aluminum oxide-gold are fabricated with silver particulates positioned above the gold electrode by means of a magnesium fluoride spacer. The particulates are formed on the spacer by annealing a thin film of silver. Light emission is observed from these junctions …
-
Development of Nanomaterial-Based Electrochemical Sensors for the Detection of Pharmaceutical Compounds
… For my final project, a hierarchical nanoporous gold electrode was fabricated using a unique dissolution, disproportion and deposition procedure. In consideration of optimal sensitivity and reproducibility, the most suitable nanoporous gold electrode was employed for the detection of …
-
Electrochemical Studies of The Interaction Between DNA and a Compound Having Anticancer Properties.
… properties. A DNA modified nanometer-sized gold electrode was prepared by surface modification of a bare gold electrode using cysteamine. These electrodes have been characterized using electrochemical techniques and were used to study the interaction between DNA and the compound. Our results …
-
Towards the development of a forensic DNA biosensor
… to methylene blue onto the surface of gold screen-printed electrodes. Prior to this, the surface characteristics of the screen-printed gold electrode are examined through the use of a well-known redox probe Ru(NH3)62+/3+. Cyclic voltammetry (CV) and Square Wave voltammetry (SWV) were …
-
The development of pulsed waveforms for the electrochemical detection of inorganic and organic compounds in flow-injection analysis and liquid chromatography
… with an asymmetric two-step waveform at a gold electrode in alkaline media, without a loss in sensitivity in comparison to three-step waveforms. PAD schemes based upon the use of a gold electrode instead of platinum are presented with special emphasis on the amperometric detection of …
-
Synthesis of N-Heterocyclic Carbene and N-Heterocyclic Nitrene Ligands for Organometallic Chemistry
… effective self-assembled monolayers (SAM) on gold which is an excellent application for gold electrode modification. Challenges remain with making an effective SAM on the electrode and we propose new NHCs to improve the stability for biochemical detection. Due to the effectiveness of NHCs, …
-
Electron transfer kinetic studies of 1-electron, 1-proton redox couples attached to electrodes
… as applied to redox couples attached to electrodes. Specifically, this work focuses on the 1-electron, 1-proton (1e1H) system. Derivation of the potential-dependence of the transfer coefficient comes from the Marcus density-of-states model of heterogeneous electron transfer. Two 1e1H …
-
Theory of Electron Transport through a Single Molecule
… alignment of molecules sandwiched between metal electrodes is essential in the design of applicable molecular electronic devices. Orbital alignment is determined both by the molecular backbone structure and the molecule-electrode interface. This thesis presents a series of studies into the …
-
Comparison of Molecular-Wires for Enhancing Charge Transport of Enzymatic Electrode Assemblies: A Glycerol Bioanode Model
… conventional biomolecules to tether enzymes onto electrode supports and to shuttle electrons between the enzyme and the electrode suffer from charge dissipation. This results in bioanondes with decreased current-voltage responses as a result of ohmic losses. Reducing the internal resistance is the …
-
Development of BioMEMS Device and Package for a Spatially Programmable Biomolecule Assembly
… ports to guide the assembly onto the patterned gold electrode sites within the channel. Facile post-fabrication in-situ biomolecule assembly of internal electrodes is demonstrated using electrodeposition of a chitosan film on a patterned gold electrode. Both in situ fluorescence and ex situ …
-
In Situ Vibrational Spectroscopic and Electrochemical Study of Electrodeposition Additives on Copper Surfaces
… alpha-SiW 12O404-, on copper, silver, and gold electrode surfaces was investigated using SERS and PM-IRRAS. The results show that silicotungstate interacts with Cu surfaces. This interaction is shown to be potential-dependent; alpha-SiW12O404- associates with the Cu surface to a greater …
-
Fabrication of microfluidic devices with application to membraneless fuel cells
… channel structures are developed to enable electrode patterning and current collection in the enzymatic and co-laminar fuel cells of interest. A variety of electrode patterning methods are developed. Gold electrode patterning by etching and lift-off techniques are investigated for the …
-
Exploring the Structural and Functional Characteristics of a Catalytic DNA
… developed by conjugating a ferrocene moiety to a gold electrode immobilized DNAzyme system.
-
Nanoscale electrostatic actuators in liquid electrolytes: analysis and experiment
… at mechanical equilibrium and the voltage versus electrode separation behavior including the instability. The analytical results predict that the system may not be a good actuator because the displacement has a very limited stable range, although the actuator would be suitable for bistable …
-
Optical and electrochemical platforms for detection of insulin secreted by human islets
… an electrochemical biosensor based on a modified gold electrode. The biointerfaces were designed using a range of surface modification strategies; the biosensor’s performance was evaluated using either interferometric reflectance spectroscopy or electrochemical impedance spectroscopy, …
Page 1 of 8