Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 8 of 8 for “"gold electroplating"”.

  1. Gold Surfaces for Dropwise Condensation

    Gold surfaces were investigated as promoters of dropwise condensation of steam at atmospheric pressure. Seven gold electroplating baths, one electroless immersion gold plating bath, and vacuum gold vapor deposition were used as deposition techniques. Five different surface preparation techniques of …

    uiuc Repository record for Gold Surfaces for Dropwise Condensation (opens in a new tab)

  2. Fabrication of high aspect ratio vibrating cylinder microgyroscope structures by use of the LIGA process

    … a combination of thick film photolithography and electroplating (nickel and gold) on a silicon substrate covered with silicon nitride and a tri-layer plating base; aligned X-ray lithography and nickel electroplating were used to build the high aspect ratio cylinders and electrodes. Deficiencies in …

    lsu-thes Repository record for Fabrication of high aspect ratio vibrating cylinder microgyroscope structures by use of the LIGA process (opens in a new tab)

  3. Improved Fabrication and Quality Control of Substrate Integrated Microelectrode Arrays

    … deterioration and breakdown, (2) and loss of gold at the gold electroplated indium-tin oxide (ITO) electrodes. The objective of this investigation was to correct these major problems. Quality control measures were employed to monitor MMEP fabrication variables. The phenotypes of polysiloxane …

    unt Repository record for Improved Fabrication and Quality Control of Substrate Integrated Microelectrode Arrays (opens in a new tab)

  4. 1.3micron quantum dot lasers and superluminescent light emitting diodes

    … incorporating a shallow ridge etch and selective gold electroplating. This improved fabrication technique allowed higher temperature ground state operation of the laser and an improvement of 10K in the characteristics temperature at a temperature range higher than 60°C. Later a novel method to …

    whiterose Download PDF for 1.3micron quantum dot lasers and superluminescent light emitting diodes (opens in a new tab)

  5. Development of Novel Thin Membrane Electrode Assemblies (MEAs) for High-Efficiency Energy Storage

    … pore morphologies have been identified. (b) The gold electroplating is a promising method for the PEMEC performance enhancement by surface modifications. (c) The microporous layers (MPLs) offer some improved PEMEC performance under specific conditions, but may not be required for optimum …

    utk-theses Repository record for Development of Novel Thin Membrane Electrode Assemblies (MEAs) for High-Efficiency Energy Storage (opens in a new tab)

  6. 3D complex shaped- dissolvable multi level micro/nano mould fabrication

    … also create the desired device structure using electroplating deposition techniques. The mould is constructed of many thin layers using a photoresist material that is dissolvable and sensitive to UV light. At the same time the device is created in the emerging mould layers using Gold …

    glasgow Download PDF for 3D complex shaped- dissolvable multi level micro/nano mould fabrication (opens in a new tab)

  7. MEMS impedance biosensor for accurate and rapid detection of E.coli 0157:H7 /

    … The first biosensor consists of two set of gold IDE arrays embedded in a SU8-PDMS microchannel. Positive dielectrophoresis (p-DEP) is used to focus and concentrate the E.coli cells into the centre of the microchannel, using the first IDE array. The concentrated cells are then guided towards …

    missouri Repository record for MEMS impedance biosensor for accurate and rapid detection of E.coli 0157:H7 / (opens in a new tab)

  8. Výroba optických zrcadel pro vysokofrekvenční antény

    Tato práce se zabývá problematikou výroby vysokofrekvenčních eliptických a hyperbolických optických zrcadel, které tvoří jednu z nejdůležitějších funkčních součástí parabolických satelitů určených pro největší a na světě nejvýše položený mezinárodní astronomický radioteleskop ALMA, realizovaný na …

    brno-tech Repository record for Výroba optických zrcadel pro vysokofrekvenční antény (opens in a new tab)