Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 154 for “"grain orientation"”.
-
An investigation of dimensional grain orientation in a sandstone
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science, 1958
-
Controlling piezoelectric properties through grain orientation in tapecast PZT multilayers
… defects, difficulty in reproducing desired grain morphologies, and the complexity of the synthesis procedure necessitates the use of commercially available BaTiO3 (BT) templates as a suitable alternative. Successful templated grain growth (TGG) of [001]-textured Pb(ZrxTi1-x)O3 (PZT) …
-
Grain Orientation Texture Control and Its Effects on the Hardness and Abrasion Resistance of Sintered Carbides
… of control over the surface and sub-surface grain orientation texture of spark plasma sintered carbides and to investigate its effects on the hardness and abrasion resistance of the material. The composite material used in this investigation is a mixture of tungsten carbide (90% WC) and …
-
An Experimental Investigation of Structural Composite Lumber Loaded by a Dowel in Perpendicular to Grain Orientation at Yield and Capacity
… analysis of beams loaded perpendicular to grain at midspan by a bolted double-shear laterally-loaded connection. Connection specimens were loaded monotonically until capacity was reached. Variables of consideration included the loaded edge distance of the connection main member, the …
-
Study of Void Growth in Commercially Pure Titanium
… pure (CP) titanium. In particular, the effect of grain orientation on void growth is investigated. The fracture process of CP titanium was visualized in model materials containing artificial holes. These model materials were fabricated using a femtosecond laser coupled with a diffusion bonding …
-
Assessment of some wood properties by near infrared spectroscopy
… to the effect of wood surface condition and grain orientation. This study therefore used NIRS to assess wood density, modulus of elasticity, modulus of rupture, grain angle, and annual ring width, studying whether and how surface condition and grain orientation affected the measurement of …
-
Tensile Properties of Loblolly Pine Strands Using Digital Image Correlation and Stochastic Finite Element Method
… the effect of the intra-ring properties and grain angles on the modulus of elasticity (MOE) and ultimate tensile strength (UTS) of different orientation wood strands and to analyze the sensitivity of the MOE and UTS of wood strands with respect to these variables. Tension testing …
-
Growth of ferroelectric thin films through metallo-organic decomposition
… polycrystalline and often randomly oriented. Grain orientation along (104) was observed on Si(100). An attenuation of 2.8 dB/cm was observed on performing optical waveguiding on films grown on sapphire. Capacitance-voltage measurements yielded dielectric constants of about 28-32 for …
-
Characterization of polycrystalline silicon films grown by LPCVD of silane
… include film crystallinity and resulting grain orientation that determine the optical and electrical properties of the films and their suitability for particular applications. An empirical approach was taken to characterize the growth process and resulting film quality. Polycrystalline …
-
Shale Characterization and Size-effect study using Scanning Electron Microscopy and X-Ray Diffraction
… image the rock sample at microscale and estimate grain properties such as grain size, grain shape and grain orientation. Statistical analysis was performed to identify the extent of correlation between these parameters and strength and size of sample. From the analysis, it was observed that there …
-
Thermal stress induced voids in nanoscale Cu interconnects by in-situ TEM heating
… where the Ta diffusion barrier meets a Cu grain boundary. In order to understand void formation in 180 nm lines, the grain orientation and local stresses are determined. In particular, Nanobeam Diffraction (NBD) in the TEM is used to obtain the diffraction pattern of each grain, from which …
-
Multiscale Microstructure Modeling and Design of Electrochemomechanics in Lithium-Ion Batteries
… in polycrystalline microstructures with varying grain size, grain boundaries and crystallographic orientations. It is found that the chemical diffusion coefficients increase with increasing grain orientation angle and decrease with the decrease of the grain boundary diffusivity. For small grain …
-
Electrochemical corrosion evaluation of niobium and its alloys as metallic bio-implants
… techniques. The effect of microstructure and grain orientation on the corrosion behavior and properties of the passive film was also discussed. Surface treatments were carried out to further increase the corrosion resistance and bioactivity of Nb. The results showed that Nb alloys exhibit …
-
Generalization of a kinematic model of non-spherical grains with application to hopper flows
… extended from sorting, packing, and transporting grains and pharmaceutical particles to the study of avalanches and soil erosion. Most of the studies focused on spherical grains. However, most grains in actual applications are geometrically ellipsoidal. Despite being common, the behaviour of the …
-
Microstructure and oxidation behaviour of Inconel 625 manufactured by laser powder bed fusion
… cooling. Internal oxide (Al2O3) was detected at grain boundaries in the sub-scale. Significant fractions of Coincident Site Lattice (CSL) boundaries formed in L-PBF IN625 following heat-treatment and oxidation (up to 70%). Nucleation of internal oxide was strongly influenced by grain boundary …
-
ADVANCEMENT OF MOIRÉ INTERFEROMETRY FOR RATE-DEPENDENT MATERIAL BEHAVIOR AND MICROMECHANICAL DEFORMATIONS
… to apply a controlled loading to single-grain solder joints. After measuring the grain orientation by electron backscatter diffraction (EBSD), detailed in-situ deformation evolutions and accumulated deformations of solder alloys are documented during a thermal cycle of -40 °C to 125 °C. …
-
Using advanced correlative microscopy techniques to investigate the behaviour of Zirconium alloys
… A methodology for correlative mapping of grain orientation and Work Function (WF) using Energy-Filtered Photoemission Electron Microscopy (EF-PEEM), allowing for large area WF mapping in an Omicron NanoESCA II, demonstrating the close link of WF to grain orientation in ZIRLO™, and leading …
-
Einfluss der Korngefüge industriell hergestellter mc- Siliziumblöcke auf die rekombinationsaktiven Kristalldefekte und auf die Solarzelleneffizienz
… the solar cell efficiency is af-fected by the grain structure of mc-silicon wafers, i.e. grain size, grain orientation and type of the grain boundaries between adjacent grains. For that purpose a new characterization method was developed which allows the measurement of the grain orientation and …
-
Investigating Wood Welding Parameters Using a Prototype Welding Machine
… welding frequency and duration interaction, grain orientation effects, alternative welding completion metrics, and strength development over time. During the wood welding process, three distinct phenomena were repeatedly observed: smoke creation, welding residue formation, and an audible …
Page 1 of 8