Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 168 for “"hardness testing"”.
-
Dynamic Brinell hardness testing
… the reliability and adaptability of a portable hardness testing device, to commercial testing. The device, a product of the Sheffield works of Brown-Bailey Co., is the property of the Canadian National Railways. The formula supplied with the instrument had been lost, and Mr. J. Gilchrist, Chief …
-
Multi-Scale Indentation Hardness Testing; A Correlation and Model
… and model based on nano and macroindentation hardness measurements. The materials used to develop and test the correlation include bulk tantalum and O1 tool steel. Following the literature review and a detailed description of the experimental techniques, the results of the nanoindentation …
-
X-Ray Microscopy & Microtomography and Hardness Testing of Titanium Versus Stainless Steel Orthodontic Brackets
… determine differences in microstructure and microhardness of titanium orthodontic brackets in comparison to traditional stainless steel brackets. Four different types of orthodontic brackets were tested, consisting of two titanium and two stainless steel brackets. The brackets were subjected to …
-
Relationship Between Percent Density and Micro-Hardness in Compacted Powder Metal Green Parts
The relationship between micro-hardness testing and local density percentages in compacted powder metal green parts was studied in this research. Specimens were studied utilizing image analysis software to produce local density percentages, and microhardness testing to investigate what …
-
Characterization of residual stresses and mechanical performance of gas tungsten arc welded aluminum alloy 6061-T6
… conducted numerous experiments quantifying the hardness and tensile strength of the weld area, however there is very little done on time dependent trials other than hardness testing. Because welded AA 6061-T6 ages naturally over the first month after welding, these changes must be accounted for …
-
Tensile Bond Strength of Light-Activated Glass Ionomer for Bonding Metal and Ceramic Brackets
… time of 30 seconds was evaluated by Knoop hardness testing. Specimens cured for 30 and 60 seconds were evaluated with Knoop hardness testing at various time intervals over a 24-hour period. An evaluation of the data indicated that the manufacturer's recommended cure time was adequate. Human …
-
Optimizing the Cold Spray Process Performance: Influence of the Initial Substrate, Coating, and Particle Impact Temperatures
… the converging section. Single-particle impact testing and splat adhesion strength testing are carried out to evaluate the effect of the initial substrate temperature on individual particles. This is investigated using pure aluminum as the feedstock powder material. A finite element modeling is …
-
Irradiation effects on the deformation of oxide dispersion strengthened steels
… using the following experimental techniques: nanohardness indentation, Vickers hardness testing, micropillar compression, microcantilever bending, transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX).</p> <p>These techniques were used to compare the properties of …
-
Evaluation of Effect of 17% EDTA and 5.25% Sodium Hypochloride Irrigating Solutions on Surface Hardness of Brasseler Endosequence Root Repair Material
… hypochlorite irrigating solutions on surface hardness of Endosequence Root Repair Material Putty (ERRM). Method: ERRM, 5.25% Sodium Hypochlorite, 17% EDTA and Deionized water were used. 42 samples were prepared and divided into 2 groups. Each group was divided in three sub groups. Sub Groups …
-
Precipitate coarsening during overaging of 2519 A1-Cu alloy: application to superplastic processing
… times, with and without prior induced strain. Hardness testing and scanning electron microscopy techniques were used to characterize evolution of microstructure during overaging. The further development of microstructure during the thermomechanical processing by warm rolling was also assessed …
-
Mechanical Properties of an Inconel Dissimilar Metal Weld
… length-scales using optical microscopy, micro-hardness testing, small and large scale tensile testing and digital image correlation (DIC). This thesis successfully achieved it goals of determining the mechanical properties and creating a model of the Inconel dissimilar metal weld. It partially …
-
Relationship Between Facies and Fracture Characteristics, Cardium Formation, Western Alberta, Canada
… from four outcrop locations supplemented by hardness testing from two cores and well completion data from 14 horizontal multi-stage hydraulically fractured wells reveal three unique mechanical facies in the Cardium reservoir and reservoir analogues studied. Mechanical Facies (MF) 2; intensely …
-
Analysis of Variable Insensitive Friction Stir Welding Parameters
… Tensile Strength, Yield Strength, Elasticity and Hardness. The strengths were evaluated by tensile testing, with the Elasticity being measure post break. Specimens were then polished where macrograph and micrograph analysis was completed. Micro-hardness testing was then completed on the weld …
-
Polyamide-imide and Montmorillonite Nanocomposites
… properties of PAI respectively. Micro-hardness testing of PAI nanocomposites was also performed. A concentration dependent state of dispersion was obtained. The glass transition (Tg), degradation and mechanical properties were found to correlate to the state of dispersion.
-
REDUCTION EXPANSION SYNTHESIS OF NICKEL-BASED CERMETS AND POTENTIAL MILITARY AND AEROSPACE APPLICATIONS
… such as scanning electron microscopy, Vickers hardness testing, energy dispersive spectroscopy, and light reflection analysis. It was found that 1% silica mixtures would produce the most effective cermet parts and that these mixtures can be applied to films on several metal substrates. These …
-
Effect of post-fabrication processing on the tensile properties of centrifugally cast silicon carbide particulate reinforced aluminum composites
… the resulting properties were studied. Tensile testing, hardness testing and optical microscopy were conducted. This study included evaluations of the mechanical properties of the composite following rolling at varying strains, temperature, strain per pass and aging treatments. The effects of …
-
PLA and PLA-Composites in 3D Printing: Evaluating PLA-Based Materials for Dental Model Fabrication
… characterized through flexural, compressive, and hardness testing on standardized specimens, while digital scans of oral structures were printed to analyze dimensional accuracy. The experimental data revealed superior flexural modulus (2055 ± 217.70 MPa) and compression modulus (2.40 ± 0.14 GPa) …
-
Effect of heat treatment and batch-to-batch material variations on microstructure of C38 steel
… batches were light optical microscopy as well as hardness testing. Some differences were observed between the batches before heat treatment but after the heat treatment had been performed there were no differences that could be discerned with an optical microscopy. The hardness tests showed a very …
-
Understanding the Phase Transformations of a Medium Manganese Steel as a Function of Carbon Content
… microanalysis (EPMA), optical microscopy, and hardness testing. This thesis will discuss how the microstructure and hardness of these medium manganese steels is influenced by the carbon content.
-
Effects of blended hydrogen enriched natural gas on the microstructure and mechanical properties of a X42 steel pipeline and Grade 290 weld
… area reduction, fracture surface, microhardness, and phase compositions were all tested on both the X42 base and Vintage Grade 290 welded material. These properties were obtained through tensile tests, Vickers hardness testing, and analysis on a scanning electron microscope. Tensile test …
Page 1 of 9