Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"harmonic forcing"”.
-
Effect of harmonic forcing on turbulent flame properties
… and whose relative significance depends upon forcing frequency, amplitude of excitation, and flame stabilization dynamics. An in-depth study on the effect of acoustic forcing on the turbulent flame properties was conducted in a turbulent Bunsen flame using PIV measurements. The results showed …
-
Response mechanisms of attached premixed flames to harmonic forcing
The persistent thrust for a cleaner, greener environment has prompted air pollution regulations to be enforced with increased stringency by environmental protection bodies all over the world. This has prompted gas turbine manufacturers to move from non-premixed combustion to lean, premixed …
-
Numerical computation of perturbation solutions of nonautonomous systems
… for solving the van der Pol equation with a harmonic forcing term.
-
Periodic solutions of Duffing's equation with forcing term containing first and third harmonics
… with damping has been considered when the forcing function is composed of a harmonic term of frequency w and a higher harmonic term of frequency 3w. The existence of subharmonics of order 1/3 and ultra-harmonics of order 2,5,7,9 was shown. The existence of other subharmonics, …
-
Experimental Nonlinear Dynamics and Snap-Through of Post-Buckled Thin Laminated Composite Plates
… work, an electrodynamic shaker was used to apply harmonic loads and the dynamic response of plate specimens was measured using a single-point displacement-sensing laser, a double-point laser vibrometer (velocity-sensing), and a set of digital image correlation cameras. Both chaotic and periodic …
-
Exploration of Vibrational Control of Two Underactuated Mechanical Systems
… that uses high-frequency, high-amplitude forcing to control underactuated mechanical systems. This thesis is concerned with exploring two underactuated mechanical systems that are controlled using vibrational inputs. The first system, a 3 degrees of freedom (DOFs) 2-link mechanism with 1 …
-
Extending Nonlinear Frequency Analysis to Flight Dynamics and Control Problems
… the past 40 years. On the other hand, the use of harmonically-forced bifurcation analysis in fixed-wing flight dynamics studies is almost unexplored. The advantage of this method is its ability to capture non-stationary nonlinearities, including but not limited to rate limiting, nonlinear damping, …
-
Experimental investigation of the wake behind an axisymmetric bluff body
… the body base of 30% of the base diameter. Harmonic forcing was accomplished using eight individual piston pump actuators providing blowing and suction disturbances into the boundary layer close to the body base, or into the wake at the base of the body. This setup allowed the excitation of …
-
Numerical investigation of transitional and turbulent backward-facing step flows
… evaluated, for both LES and RANS. By employing harmonic forcing of the shear layer and a Fourier analysis in time and in the lateral direction the generation of coherent structures was linked to specific hydrodynamic instabilities. Comparison with references in the literature, resolution and …
-
Numerical investigation of forced transitional and turbulent wall jets
… flow transition, beginning with receptivity to harmonic forcing, followed by linear and nonlinear disturbance development, and 2D secondary instability. It is shown that the disturbance development in the turbulent flow parallels the one in the transitional flow in many respects. In particular, …
-
Surface and Subsurface Physical and Chemical Characterization of Materials at the Nanoscale
… of material characteristics. By applying a multi-harmonic mechanical forcing to the probe and</p> <p>another multi-harmonic forcing to the sample, we obtain, via frequency mixing a series of new operational modes. By varying the nature of the excitations, using elastic or photonic coupling, it is …
-
Forced Capillary-Gravity Waves in a 2D Rectangular Basin
… with water. To generate the surface waves, a harmonic forcing is applied to the vertical side walls of the basin. The dissertation consists of four parts which work with different assumptions on the frequencies of the forcing. The first part discusses the linearized model with Hocking's edge …
-
Dynamics of harmonically forced, turbulent premixed flames
Dynamics of finite thickness and harmonically forced, turbulent premixed flames Sukruth Somappa 102 Pages Directed by Dr. Tim Lieuwen Turbulent combustion investigates the interactions of broadband fluid dynamic disturbances and combustion. It plays an important role in the design and operation of …
-
Input-output analysis of high-speed turbulent jet noise
… ability to spatially separate near-field input forcing (driven by nonlinear turbulence) from far-field acoustic output. Precisely the same idea, namely the separation of sources and outputs, forms the basis of traditional acoustic analogies. Different from the usual statistical descriptions of …
-
BIMODAL FORCING OF A SHARP-EDGED IMPINGING JET WITH CONSIDERATION OF WALL COOLING
… The flow excitation approach, known as bi-modal forcing, utilizes two excitation frequencies: the initial instability frequency of the jet shear layer and its subharmonic. This type of forcing involves several parameters: the intermodal phase (?), the modal amplitude ratio (??), and the overall …
-
Numerical predictions of the radiated sound power from submerged shells
… of a fully submerged pressure hull under harmonic forcing functions. The pressure hull is simplified as a cylindrical shell with hemispherical end closures. The structure is modelled using finite elements while the surrounding water is modelled using boundary elements. The simultaneous …
-
A Study Of Compressive Sensing For Application To Structural Health Monitoring
… an impact. In the latter, the system is excited harmonically and damage is detected by a change in amplitude of the system's vibration. As systems in real world applications are predominantly multi-DOF, CS is tested on a 2-DOF system excited with a harmonic forcing. Here again, damage detection …