Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 879 for “"heat source"”.

  1. Natural convection above a horizontal heat source

    An investigation of natural convection heat transfer from a flush mounted heater on a larger horizontal substrate in water has been conducted. The focus of the present investigation was on the buoyant flow above the heat source. Temperature measurements i

    nps Repository record for Natural convection above a horizontal heat source (opens in a new tab)

  2. IR-Hot Gas Heat Source for Automated Tow Placement

    … in the nip region. Since the torches could not heat effectively in the nip region, the roller temperature was the dominant influence on interlaminar bond strength. The roller temperatures required for high bond strength caused resin and fiber on the panel top surface to adhere to the compaction …

    odu Repository record for IR-Hot Gas Heat Source for Automated Tow Placement (opens in a new tab)

  3. Boundary Element Method for Solving Inverse Heat Source Problems

    … method (BEM) is applied for solving inverse source problems for the heat equation. Through the employment of the Green’s formula and fundamental solution, the BEM naturally reduces the dimensionality of the problem by one although domain integrals are still present due to the initial …

    whiterose Download PDF for Boundary Element Method for Solving Inverse Heat Source Problems (opens in a new tab)

  4. Thermomechanical Interaction Analysis of Bodies Subjected to Oscillatory Heat Source

    Surface heating by application of a moving heat source is a common problem in most manufacturing processes as well as in many tribological applications. The existing literature on studies of moving heat source problems primarily concentrates on unidirectional moving heat sources. Yet, a more …

    lsu-thes Repository record for Thermomechanical Interaction Analysis of Bodies Subjected to Oscillatory Heat Source (opens in a new tab)

  5. Point Heat Source Correlation to Microstructural Evolution in Advanced Manufacturing

    … can be performed, the use of single-point heat sources has become the standard to control a final product’s properties. It is imperative to understand how the heat source used in the different advanced manufacturing processes affect the microstructure of interest. The intimate relationship …

    nebraska Repository record for Point Heat Source Correlation to Microstructural Evolution in Advanced Manufacturing (opens in a new tab)

  6. Propagation of fire generated smoke in shipboard spaces with heat source

    The propagation of fire generated smoke and heat transfer into a shipboard space has been computationally modeled using a commercial code generated by Computational Fluid Dynamics Research Corporation (CFDRC). The space modeled was 1-158-1-L of an Arleigh Burke Class Flight IIA Destroyer. Three …

    nps Repository record for Propagation of fire generated smoke in shipboard spaces with heat source (opens in a new tab)

  7. Revealing the heterogeneity in weld microstructures using the thermomechanical dissipative heat source

    … by the dissipation of energy in the form of heat as a result of thermodynamically irreversible processes occurring at the microscale. This is applicable to deformation in both elastic and plastic regime so long as the thermodynamically irreversible processes are activated. It follows that …

    soton Download PDF for Revealing the heterogeneity in weld microstructures using the thermomechanical dissipative heat source (opens in a new tab)

  8. Analytical Thermal Model of Friction Stir Welding with Spatially Distributed Heat Source

    Friction stir welding (FSW) has been studied extensively for the past two decades. Thermal modeling has been of particular interest, as the quality of the weld is dependent upon the temperature history of the work piece during the process. Since direct temperature measurements of the welded zone …

    byu Repository record for Analytical Thermal Model of Friction Stir Welding with Spatially Distributed Heat Source (opens in a new tab) Download PDF for Analytical Thermal Model of Friction Stir Welding with Spatially Distributed Heat Source (opens in a new tab)

  9. Design of the velocity measurement system using a heat-source and IR detectors

    … the second IR detector or due to conduction of heat from the hotspot to the rest of the body of the moving object, are implemented using the microprocessor based design.</p>

    ut-knoxville Repository record for Design of the velocity measurement system using a heat-source and IR detectors (opens in a new tab)

  10. Heat source transfer functions and their application to low temperature radiant heating systems

    Radiant heating systems have been identified by segments of the HVAC industry as technology which can potentially reduce the energy consumption of buildings. As a result of higher mean radiant temperatures within radiantly heating structures, it has been hypothesized that these systems can provide …

    uiuc Repository record for Heat source transfer functions and their application to low temperature radiant heating systems (opens in a new tab)

  11. Thermal modeling for calculation of formation temperatures for deep water wells with chemical heat source

    … depleted zones is becoming more common as the resources are exhausted and the fields mature. To be able to access deeper sections of the reservoirs, it is essential to drill through depleted zones effectively. This need brings around the challenges including severe lost circulation and poor zonal …

    texas Repository record for Thermal modeling for calculation of formation temperatures for deep water wells with chemical heat source (opens in a new tab)

  12. Aerodynamic and thermal analysis of a heat source at the underside of a passenger vehicle

    … phenomena using a 2005 Chevrolet Aveo5 with a heat source affixed to it to create a baseline. The results show that irrespective of the yaw angle used, only temperatures in the vicinity of the heat source increased. The rear suspension also deflected the airflow preventing heat transfer. The …

    uoit Repository record for Aerodynamic and thermal analysis of a heat source at the underside of a passenger vehicle (opens in a new tab)

  13. Development of a hybrid heat source radiant system using an embedded concentric tube heat exchanger

    … space thermal environment control system using a heated or cooled surface of building components such as floor, wall, and ceiling. The systems have been reported to have advantages in improving occupants’ thermal comfort and reducing heating and cooling energy consumption. Although the system has …

    uiuc Repository record for Development of a hybrid heat source radiant system using an embedded concentric tube heat exchanger (opens in a new tab)

  14. Studies in the development of SCWO vessel reactor with hydrothermal flame as an internal heat source

    La oxidación en agua supercrítica (OASC) es una tecnología prometedora para la destrucción de residuos, pero su comercialización se ha retrasado por los problemas de corrosión y el depósito de sal asociados a esta tecnología así como por su alto consumo energético. el uso de reactores con una llama …

    valladolid Repository record for Studies in the development of SCWO vessel reactor with hydrothermal flame as an internal heat source (opens in a new tab)

  15. Rapid Thermo-mechanical Modeling of Laser Powder-Bed Fusion Additive Manufacturing using an Effective Heat Source

    … computational time and implementing a proper heat source model are some of the existing challenges in the modeling and simulation of LPBF. Due to micro-scale features of the LPBF melt pool zone, as well as the high-speed process (up to 5 m/s), the computational cost of the simulation process …

    waterloo Repository record for Rapid Thermo-mechanical Modeling of Laser Powder-Bed Fusion Additive Manufacturing using an Effective Heat Source (opens in a new tab)

  16. A Study of Thermal Responses of a Body of Complex Geometry to a Moving Heat Source

    … and the crystalline structure is determined by heating and cooling rates. Thus the knowledge of temperatures, and heating and cooling rates, becomes the key to understanding these effects of heating. Since the greatest part of fusion welding is done using a gas torch or an electric arc, the …

    byu Repository record for A Study of Thermal Responses of a Body of Complex Geometry to a Moving Heat Source (opens in a new tab) Download PDF for A Study of Thermal Responses of a Body of Complex Geometry to a Moving Heat Source (opens in a new tab)

  17. An Experimental Evaluation of Low Calorific Value Gaseous Fuels as a Heat Source for Stirling Engines

    … of Low Calorific Value Gaseous Fuels as a Heat Source for Stirling Engines, was written by Johan Westerberg as a Master's thesis at Chalmers University of Technology. It covers the topic of MILD combustion of liquid propane gas, G25 natural gas, synthesis gas and landfill gas, of which the …

    chalmers Repository record for An Experimental Evaluation of Low Calorific Value Gaseous Fuels as a Heat Source for Stirling Engines (opens in a new tab)

Page 1 of 44