Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"heat transfer correlation"”.

  1. A fuel independent heat transfer correlation for premixed spark ignition engines

    … and conflicting optimization targets. The heat transfer model, which computes the heat losses to the cylinder walls inside the engine is one of the most important sub-models, because it has an influence on the main three optimization targets (efficiency, emissions and power output). …

    ghent Repository record for A fuel independent heat transfer correlation for premixed spark ignition engines (opens in a new tab)

  2. Development of a heat-transfer correlation for supercritical water in supercritical water-cooled reactor applications

    … data, obtained in Russia, was analyzed and a new heat-transfer correlation for supercritical water was developed. This experimental dataset was obtained within conditions similar to those for proposed SuperCritical Water-cooled nuclear Reactor (SCWR) concepts. Thus, this new correlation, for …

    uoit Repository record for Development of a heat-transfer correlation for supercritical water in supercritical water-cooled reactor applications (opens in a new tab)

  3. A Development Of A General Heat Transfer Correlation For Boiling Two-Phase Flow Of Pure Ethanol Based On Experimental Datasets And Correlations

    Two-phase flow heat transfer has gained an extensive focus over the past decades in many industrial applications and thermal systems. Flow involving phase change due to boiling or condensation exhibits much higher heat transfer coefficient compared to single-phase flow when it is only sensible heat …

    nodak Repository record for A Development Of A General Heat Transfer Correlation For Boiling Two-Phase Flow Of Pure Ethanol Based On Experimental Datasets And Correlations (opens in a new tab)

  4. AN ASSESSMENT OF FLOW REGIME MAPS AND A NUMERICAL HEAT TRANSFER CORRELATION FOR THE STRATIFIED/ANNULAR REGIME OF SHEAR-DRIVEN INTERNAL CONDENSING FLOWS

    … popular approach based on semi-empirical heat transfer correlations. One of the primary contributors of this disconnect is a lack of understanding caused by the fact that typical heat transfer correlations eliminate the dependence of the heat transfer coefficient on the method of cooling …

    mtu Repository record for AN ASSESSMENT OF FLOW REGIME MAPS AND A NUMERICAL HEAT TRANSFER CORRELATION FOR THE STRATIFIED/ANNULAR REGIME OF SHEAR-DRIVEN INTERNAL CONDENSING FLOWS (opens in a new tab)

  5. Natural convection from a horizontal heater in response to steady and pulsatile input powers

    Natural convection heat transfer from a flush mounted heater on a larger horizontal substrate in water has been investigated for both steady and periodic input powers. For steady power conditions, the heat flux was varied from 222 to 6800 W/m(2). Heater surface temperatures were measured at several …

    nps Repository record for Natural convection from a horizontal heater in response to steady and pulsatile input powers (opens in a new tab)

  6. Performance and safety of centrifugal chillers using hydrocarbons.

    … is unknown. Hydrocarbon replacements need a heat transfer correlation for refrigerant in flooded evaporators and predictions for operating conditions, capacity and performance. Safety precautions for large quantities of hydrocarbon refrigerants are needed and control of overpressure in …

    unsw Repository record for Performance and safety of centrifugal chillers using hydrocarbons. (opens in a new tab)

  7. Direct contact heat exchanger development

    … tools that guide the design of a direct contact heat exchanger for small-scale commercial and/or residential HVAC applications. Experimental data was gathered with a temperature and humidity controlled wind tunnel having a 15 cm square test section that utilized flat-fan water sprays as the …

    missouri Repository record for Direct contact heat exchanger development (opens in a new tab)

  8. Investigations of Standing Heat Loss from Solar Domestic Hot Water Tanks

    Heat loss from vertical solar hot water storage cylinders is detrimental to their thermal performance. As such, many researchers devoted their attention to investigating changes in the rate of heat loss in response to different cylinder designs and initial temperature profiles. Despite the …

    auckland-tech Repository record for Investigations of Standing Heat Loss from Solar Domestic Hot Water Tanks (opens in a new tab)

  9. Evaluation of Convective Heat Transfer Numerical Methods on Rough Surfaces from Additive Manufacturing

    … (DERM) has been used to improve convective heat transfer predictions on surface roughness. This work aims to validate the core momentum and heat transfer correlation of DERM through an evaluation of Computational fluid dynamics (CFD)-based solution of the flow around individual roughness …

    ucf Repository record for Evaluation of Convective Heat Transfer Numerical Methods on Rough Surfaces from Additive Manufacturing (opens in a new tab)

  10. Study of melting and freezing processes of water for application to ice thermal energy storage system

    … melting and freezing conditions. A connective heat transfer correlation, for melting of ice in a container confined by two horizontal plates, was obtained based on the experimental work. An analytical model based on heat conduction was developed to predict ice formation in an enclosure which …

    iastate Repository record for Study of melting and freezing processes of water for application to ice thermal energy storage system (opens in a new tab)

  11. Thermal Modeling of Shape Memory Alloy Wire Actuators for Automotive Applications

    … “remember” and return to its original shape when heated due to its temperature dependent phase transformation. Shape Memory Alloy wire has significant potential for application in the automobile industry due to its high ratio of energy / weight and silent actuation. However, a dependable method to …

    waterloo Repository record for Thermal Modeling of Shape Memory Alloy Wire Actuators for Automotive Applications (opens in a new tab)

  12. Quantification of Flame Heat Feedback in Cone Calorimetry Tests

    … models must be developed. Understanding flame heat feedback is essential in developing accurate pyrolysis models. The most widely used standard to quantitatively assess material flammability is the cone calorimeter. The goal of this project was to develop a spatially-resolved flame heat …

    maryland Repository record for Quantification of Flame Heat Feedback in Cone Calorimetry Tests (opens in a new tab)

  13. A study of surface and geometric effects on the nucleate boiling of liquid nitrogen and liquid argon from atmospheric to the critical pressure

    "A maximum heat flux correlation was derived for corresponding states liquids and subsequently verified by the data collected in this study as well as data presented in the literature. By applying this correlation, one can predict maximum heat flux values at high pressures from maximum heat flux …

    must-thes Repository record for A study of surface and geometric effects on the nucleate boiling of liquid nitrogen and liquid argon from atmospheric to the critical pressure (opens in a new tab)

  14. Experimental results on gravity driven fully condensing flows in vertical tubes, their agreement with theory, and their differences with shear driven flows' boundary-condition sensitivities

    … results towards development of a reliable heat transfer correlation for a specific annular condensation flow regime inside a vertical tube. For fully condensing flows of pure vapor (FC-72) inside a vertical cylindrical tube of 6.6 mm diameter and 0.7 m length, the experimental measurements …

    mtu Repository record for Experimental results on gravity driven fully condensing flows in vertical tubes, their agreement with theory, and their differences with shear driven flows' boundary-condition sensitivities (opens in a new tab)

  15. Experiments and Analyses: An Ice Slurry System using Direct Contact Heat Transfer for Cooling Applications

    … of an ice slurry system utilizing direct contact heat transfer between two immiscible liquids, water and coolant, FC-84, requires a deeper understanding of the heat transfer process between the water and liquid in the ice slurry generator. <br>Experiments and analyses were carried out to …

    nus Repository record for Experiments and Analyses: An Ice Slurry System using Direct Contact Heat Transfer for Cooling Applications (opens in a new tab) Download file for Experiments and Analyses: An Ice Slurry System using Direct Contact Heat Transfer for Cooling Applications (opens in a new tab)

  16. Statistically steady measurements of Rayleigh-Taylor mixing in a gas channel

    … gas mixture of air and helium, a new convective heat transfer correlation was formulated to account for variable-density low Reynolds number flows past a heated cylinder. In addition to the hot-wire measurements, a digital image analysis procedure was used to characterize various properties of …

    tamu Repository record for Statistically steady measurements of Rayleigh-Taylor mixing in a gas channel (opens in a new tab)

  17. Thermal and Hydraulic Performance of Finned Tube Heat Exchangers

    This study numerically examines the heat transfer and pressure drop performance of finned tube heat exchangers with staggered and inline tube layout for a range of tube pitch. The first part of the thesis considers the case where the heat exchanger is placed in fully ducted airflow. The simulations …

    mcmaster Repository record for Thermal and Hydraulic Performance of Finned Tube Heat Exchangers (opens in a new tab)

  18. Experimental and numerical analysis of heat transfer in a particle-based concentrated solar power receiver

    … hexagonal absorber tubes to capture sunlight and transfer heat to particles flowing over the heated tube surfaces. The granular flow heat transfer characteristics are critical to the design of the system but are not well understood. This research seeks to characterize heat transfer within this …

    colo-mines Repository record for Experimental and numerical analysis of heat transfer in a particle-based concentrated solar power receiver (opens in a new tab)

  19. Bed-to-surface heat transfer in conical spouted and spout-fluid beds

    Bed-to-surface heat transfer investigation from a vertically immersed cylindrical surface was conducted in large laboratory scale conical spouted and spout-fluid beds in this study. In order to design a high performance spouted and spout-fluid beds, the effects of bed design parameters (such as …

    metu Repository record for Bed-to-surface heat transfer in conical spouted and spout-fluid beds (opens in a new tab) Download PDF for Bed-to-surface heat transfer in conical spouted and spout-fluid beds (opens in a new tab)

  20. Development of thermal hydraulic correlations for the University of Texas at Austin TRIGA reactor using computational fluid dynamics and in-core measurements

    … the water coolant exceeds the boiling point, the heat transfer out of the fuel rods into the coolant will greatly decrease and will need to rely upon other safety feedbacks and systems to avoid an accident condition. TRIGA thermal hydraulic systems are currently modeled using a finite differencing …

    texas Repository record for Development of thermal hydraulic correlations for the University of Texas at Austin TRIGA reactor using computational fluid dynamics and in-core measurements (opens in a new tab)

Page 1 of 2