Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 135 for “"heated surface"”.
-
Drying of paper pulp on a heated surface
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science. Dept. of Chemical Engineering, 1949
-
Development of electric probes to detect phase change at a heated surface.
… have been developed to detect the rewetting of a heated surface, during quenching experiments. Measurements of electric resistance were made using two different methods: (i) Two-Electrode measurement, through a thermocouple probe; (ii) Probe-to Wall measurement, through a zirconium-platinum probe. …
-
A study of the mechanism of drying sand on a heated surface
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science. Dept. of Chemical Engineering, 1953
-
Numerical investigations of forced laminar and turbulent wall jets over a heated surface
… on laminar and turbulent wall jets over a heated flat plate is analyzed. Highly accurate Direct Numerical Simulations (DNS) are used in the laminar case to investigate the dominant transport mechanisms. When forcing is applied, the skin friction is reduced markedly and the wall heat …
-
Modeling the effect of a spray on a liquid film on a heated surface
… a formation of a liquid layer above the heater surface. The interaction between the spray droplets and the liquid layer was studied in the present work indirectly by assuming a pre-existing liquid layer moving in the horizontal direction and modeling the flux of liquid spray as mass and momentum …
-
Experimental study of heat transfer from a moving and evaporating meniscus on a heated surface
… formed between a needle dispensing water over a heated circular face of a rotating copper block. The needle is offset from the axis of rotation and thus forms a moving meniscus. The water flow rate, heater surface temperature and the speed of rotation are controlled to provide a stable meniscus …
-
Drying rates and heat transfer coefficients on a heated surface for the drying of sand
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Chemical Engineering, 1957
-
Effect of transverse convex curvature on heat transfer from uniformly heated surface with backward-facing steps.
… is between 4,000 and 100,000. In addition, a surface-streamline flow visualization technique was tried to identify the reattachment loci, as well as the axisymmetry of the temperature distribution. It was found that the points of maximum heat transfer and reattachment are coincident within an …
-
CONVECTIVE HEAT TRANSFER ENHANCEMENT OF A CHANNEL-FLOW USING HORIZONTALLY-ORIENTED PIEZOELECTRIC FANS
… the relative position of the fan tip to the heated surface. A maximum heat transfer enhancement of 102 % was obtained at the channel flow rate of 15 LPM. The fan was placed at the front-end location of the heated surface and operated with a displacement of 11.8 mm. For a fixed channel flow …
-
High heat rate testing of thermal response of carbon-phenolic FM-5055
… depth were found. A boundary condition for the heated surface was also measured to allow for numerical predictions of the experiments. The results of these experiments are discussed and are presented as a database with which numerical codes may be verified. Numerical predictions were made for …
-
CONVECTIVE HEAT TRANSFER ENHANCEMENT OF A CHANNEL-FLOW USING SYNTHETIC JET
… position to the front end and center of the heated surface, moving further downstream. The maximum diaphragm displacement of 1.2 and maximum frequency increased the heat transfer rate by 97.43%. Finally, Q-criterion was analyzed to observe the interaction between the channel flow and …
-
Effects of the electric Kelvin force on spray cooling performance
… chamber (housing a spray nozzle and electrically heated surface) and a flow generating base package has been built and tested for varying nozzle-to-heater distances and also varying electrode geometries for a range of spray conditions and electrode voltages. The two part goal was to first …
-
Numerical Study of Flow of Supercritical Carbon Dioxide Inside Microchannels with Heat Transfer
… of supercritical Carbon Dioxide (sCO2) over a heated surface inside a microchannel of hydraulic diameter 0.3 mm was studied using three-dimensional computational fluid dynamics (CFD) model. The temperature of the heated surface was then compared and validated with available experimental …
-
Heat Transfer Enhancement of Spray Cooling with Nanofluids
… technique for achieving large heat fluxes at low surface temperatures by impinging a liquid in droplet form on a heated surface. Heat is removed by droplets spreading across the surface, thus removing heat by evaporation and by an increase in the convective heat transfer coefficient. The addition …
-
Reduction of convective heat loss from an external solar receiver using an air curtain
… of convective heat loss from an external heated surface by introducing an air curtain that disrupts the buoyant flow rising along the heated surface. The external CSP receiver surface is an important setting where this mode of heat transfer frequently occurs. An isothermal flat plate with …
-
Heat Transfer in Boiling Dilute Emulsion with Strong Buoyancy
… 0% ≤ ≤ 1% and 1.82 × 1012 ≤ RaH ≤ 4.42 × 1012. Surface temperatures along the heated surface reached temperature that were 20 °C in excess of the dispersed phase saturation temperature. An increase of ~20% was seen in the average Nusselt numbers at the highest Rayleigh numbers. Holography was …
Page 1 of 7