Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 629 for “"heating rate"”.

  1. Impacts of Heating Rate and Reaction Atmosphere on the Calcination Process

    … in turn, is directly impacted by the reaction rate and activation energy. Additionally, the utilization of steam as a calcination medium has the potential to reduce energy costs by lowering the heat requirement for carbonates through the elimination of fuel-related carbon emissions and …

    adelaide Repository record for Impacts of Heating Rate and Reaction Atmosphere on the Calcination Process (opens in a new tab)

  2. Extension of the master sintering curve for constant heating rate modeling

    … sintering schemes that combine both a constant heating rate and an isothermal hold. Rather than just being able to predict a final density for the object of interest, the extension to the MSC will actually be able to model a sintering run from start to finish. Because the Johnson model does not …

    gatech Repository record for Extension of the master sintering curve for constant heating rate modeling (opens in a new tab)

  3. Pyrolysis of Fine Coal Particles at High Heating Rate and Pressure

    High-intensity pyrolysis, rapid heating in an inert gas atmosphere at up to 20 atm pressure, of 6 Australian coals was examined to gain further insight into high-intensity processes such as Integrated Gasification Combined Cycles (IGCC). Experiments focussed on pyrolysis in a specially developed …

    unsw Repository record for Pyrolysis of Fine Coal Particles at High Heating Rate and Pressure (opens in a new tab)

  4. Effect of heating rate on intercritical annealing of low-carbon coldrolled steel

    A study was performed on the effect of heating rate on transformations during intercritical annealing of cold-rolled low-carbon sheet steels. Two sets of experiments were developed: 1) a series of alloys (1020, 1019M, 15B25) with two different cold reductions (nominally 40 and 60 pct) were heated …

    colo-mines Repository record for Effect of heating rate on intercritical annealing of low-carbon coldrolled steel (opens in a new tab)

  5. Effects of slurry heating rate on conversion during short-contact-time coal liquefaction

    … using a recycle solvent from the Lummus Integrated Two-Stage Liquefaction Process and a Kentucky No. 9 coal (without the addition of gaseous hydrogen). Experiments were conducted to relate product stability to process para meters, Including the time-temperature history of the slurry during …

    ut-knoxville Repository record for Effects of slurry heating rate on conversion during short-contact-time coal liquefaction (opens in a new tab)

  6. Tensile Properties of Beef Semitendinosus Muscle as Affected by Heating Rate and End Point Temperature

    … purpose of this study was to study the effect of heating rate (comparable to oven roasting at 93° and 149°C) and end point temperature (50°, 60° and 70°C) on tensile properties of muscle fibers and connective tissue of beef semitendinosus muscle. Cores of meat were heated in tubes in a water bath …

    ut-knoxville Repository record for Tensile Properties of Beef Semitendinosus Muscle as Affected by Heating Rate and End Point Temperature (opens in a new tab)

  7. A Study of the Volatile Matter of Coal as a Function of the Heating Rate

    … of volatile matter yields as a function of the heating rate was conducted. A suite of 21 coal and coke samples varying in rank from anthracitic to lignitic and heating rates from 10°C/min to about 450°C/min were used in the study. Heating rates up to 60°C per minute, which are typically used in …

    wku-diss Repository record for A Study of the Volatile Matter of Coal as a Function of the Heating Rate (opens in a new tab)

  8. Effect of Heating Rate on Thermally Induced Pore Water Pressure and Crack Evolution in Clay and Shales

    … shale samples, with a specific emphasis on how heating rates influence temperature distribution and the evolution of pore pressure under elevated temperatures. Clay shales, characterized by their extensive geological presence and low hydraulic conductivity, carry immense importance across a wide …

    calgary Repository record for Effect of Heating Rate on Thermally Induced Pore Water Pressure and Crack Evolution in Clay and Shales (opens in a new tab)

  9. The effects of temperature acclimation and heating rate on the thermal tolerance of juvenile white sturgeon (Acipenser transmontanus)

    … about how acclimation to higher temperatures or rate of temperature increase affects their thermal tolerance. The Kenney dam on the Nechako River is home to the northern-most population of white sturgeon and is mandated to maintain water temperatures below 20°C for migrating sockeye salmon, but …

    ubc Repository record for The effects of temperature acclimation and heating rate on the thermal tolerance of juvenile white sturgeon (Acipenser transmontanus) (opens in a new tab) Download PDF for The effects of temperature acclimation and heating rate on the thermal tolerance of juvenile white sturgeon (Acipenser transmontanus) (opens in a new tab)

  10. Influence of initial microstructure and heating rate on kinetics of phase transformation in medium carbon low alloy steel

    … critical influence of initial microstructure and heating rate on the kinetics of austenite formation in medium carbon low alloy steels, which are vital materials for various industrial applications such as landing gear and hydraulic turbines. Understanding and precisely controlling these phase …

    ets-quebec Download PDF for Influence of initial microstructure and heating rate on kinetics of phase transformation in medium carbon low alloy steel (opens in a new tab)

  11. Experimental Study of Pressure and Heating Rate on a Swept Cylindrical Leading Edge Resulting from Swept Shock Wave Interference

    … edge sweep on surface pressure and heat transfer rate for swept shock wave interference is presented. This study was conducted as a cooperative agreement between NASA Langley Research Center and Calspan-University of Buffalo Research Center. Experimental tests were conducted in the Calspan 48-inch …

    odu Repository record for Experimental Study of Pressure and Heating Rate on a Swept Cylindrical Leading Edge Resulting from Swept Shock Wave Interference (opens in a new tab)

  12. Effect of heating rate to test temperature on superplastic response in an A1-8%Mg-1%Li-0.2%Zr alloy

    The effect of heating rate to tension test temperature on superplastic response in an Al-8%Mg-1%Li-0.2% Zr alloy was studied. A thermomechanical process (TMP) was used that involved warm rolling with controlled reheating between rolling passes. During the TMP, microstructural evolution was …

    nps Repository record for Effect of heating rate to test temperature on superplastic response in an A1-8%Mg-1%Li-0.2%Zr alloy (opens in a new tab)

  13. A theoretical sensitivity study of wet thermal anti-icing

    … of an icing condition on the heat addition rate required to keep the stagnation line of a cylinder ice-free (anti-ice). The governing equations of energy and mass transport for the stagnation region of a cylinder are presented. A parametric analysis was conducted to determine the …

    ut-knoxville Repository record for A theoretical sensitivity study of wet thermal anti-icing (opens in a new tab)

  14. Kinetic analysis and modeling of wood pyrolysis under nonisothermal conditions

    The rate of pyrolysis is a major concern when investigating pyrolysis, gasification and combustion of solids such as wood, coal, and plastics. Heating rate, which is an important process variable in pyrolysis, is commonly regarded as affecting not only the rate of pyrolysis, but also the actual …

    ttu Repository record for Kinetic analysis and modeling of wood pyrolysis under nonisothermal conditions (opens in a new tab)

  15. Investigation of the heating and curing rate of polymeric materials with thermal energy, continuous and pulsed microwave radiation

    The purpose of this work was to study the heating and curing rate of polymers with continuous and pulsed microwave radiation and compare with conventional thermal energy. The heating rate of poly(ethylene glycol) and poly(propylene glycol) has been studied as a function of molecular weight with …

    vt Repository record for Investigation of the heating and curing rate of polymeric materials with thermal energy, continuous and pulsed microwave radiation (opens in a new tab)

  16. The effect of calcination conditions on the graphitizability of novel synthetic and coal-derived cokes.

    The effects of calcination heating rate and ultimate calcination temperature upon calcined coke and subsequent graphitic material microstructures were studied for materials prepared from three different precursors. The pitch precursors used were Mitsubishi AR pitch (a synthetic, 100% mesophase …

    wvu Repository record for The effect of calcination conditions on the graphitizability of novel synthetic and coal-derived cokes. (opens in a new tab)

  17. Efeito da velocidade de carbonização na composição química do extrato pirolenhoso da madeira de eucalipto (Eucalyptus urophylla x Eucalyptus grandis) e Jurema Preta (Mimosa tenuiflora (Wild.) Poir.)

    … used in the biomass carbonization process, the heating rate is one of the most important changes in the gravimetric yield of the products obtained. In face of it, the purpose of this study was to evaluate the influence of different heating velocities on the gravimetric yields in charcoal, …

    brazil-ufrn Repository record for Efeito da velocidade de carbonização na composição química do extrato pirolenhoso da madeira de eucalipto (Eucalyptus urophylla x Eucalyptus grandis) e Jurema Preta (Mimosa tenuiflora (Wild.) Poir.) (opens in a new tab)

Page 1 of 32