Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 468 for “"heating rates"”.
-
Estimation of Unsteady Nonuniform Heating Rates from Surface Temperature Measurements
Shock wave interactions such as those that occur during atmospheric re-entry, can produce extreme thermal loads on aerospace structures. These interactions are reproduced experimentally in hypersonic wind tunnels to study how the flow structures relate to the deleterious heat fluxes. In these …
-
Sawdust Pyrolysis and Petroleum Coke CO2 Gasification at High Heating Rates
… determine optimal conditions for operation. High heating-rate (100,000 K/s) pyrolysis experiments were performed with biomass (sawdust) in BYU's atmospheric flat-flame burner reactor at conditions ranging from 1163 to 1433 K with particle residence times ranging from 23 to 102 ms. Volatile yields …
-
Effects of Pressure on Coal Pyrolysis at High Heating Rates and Char Combustion
… project was to characterize high pressure, high heating rate coal pyrolysis and char combustion, with emphasis on improving coal/char high pressure combustion models. A flat-flame burner was used in a high pressure laminar flow facility to conduct high temperature, high heating rate pyrolysis and …
-
Gasification of Biomass, Coal, and Petroleum Coke at High Heating Rates and Elevated Pressure
… have been performed at moderate temperatures, heating rates, and pressures. In this work, both pyrolysis and char gasification experiments were performed on coal, petroleum coke, and biomass at conditions pertinent to commercial entrained-flow gasifiers. Rapid biomass pyrolysis experiments were …
-
A FUNDAMENTAL STUDY ON THE COMBUSTION CHARACTERISTICS OF MUNICIPAL WASTE PLASTICS UNDER HIGH HEATING RATES
… WHILETHE PE FLAMES THE LOWEST. THE BURNING RATES OF PS PARTICLES WERE FOUND TO BE CONTROLLED BY THE DIFFUSION RATES IN THE GASEOUS PHASE, WHILE THOSE OF PE PARTICLES BY THE PYROLYSIS RATES OF THE PARTICLES. IGNITION OF PVC PARTICLES WAS SUPPRESSED INITIALLY DUE TO THE INITIAL EVOLUTION OF …
-
A simplified means of providing first estimates to laminar heating rates on isothermal axisymmetric blunt bodies
An approximate scheme for the rapid calculation of first estimates to the laminar heat transfer distribution over isothermal axisymmetric blunt bodies is developed. The method devised is free of any integral relations and reduces the required computing effort to a simple slide rule task. The …
-
Effects of Pressure on the Properties of Coal Char Under Gasification Conditions at High Initial Heating Rates
The effects of elevated pressure and high heating rates on coal pyrolysis and gasification were investigated. A high-pressure flat-flame burner (HPFFB) was designed and built to conduct these studies. The HPFFB was designed to provide an environment with laminar, dispersed entrained flow, with …
-
Intramuscular Heating Rates of a Chattanooga Intelect® Legend XT Therapeutic Ultrasound with a 3 MHz Frequency, and 1.0 W/cm2 Intensity at Three Depths Up to 2.5 cm
… on research using the Omnisound unit. Unique heating rates have been observed among various manufacturers. No studies have been performed regarding heating rates of the Chattanooga Intelect® unit. Objective: Determine the rate of temperature increase of the medial gastrocnemius using the …
-
Gelation properties of porcine muscle proteins
<p>The effects of linearly increasing heating rates (17, 38 and 85°C/hr) and protein concentration (10, 20, 30, 40 and 50 mg/mL) on thermally induced gels made of extracted salt-soluble proteins were evaluated. Gel strength analyses indicated that the force needed to compress muscle protein gels …
-
High heat rate testing of thermal response of carbon-phenolic FM-5055
… of decomposing polymers exposed to initial heating rates up to 250 °C/sec and maximum temperatures exceeding 2000 °C. Eight experimental runs were performed with the facility on blocks of carbon-phenolic FM-5055. During these experiments, temperature and heating rates at various locations in …
-
Effect of heating rate to test temperature on superplastic response in an A1-8%Mg-1%Li-0.2%Zr alloy
The effect of heating rate to tension test temperature on superplastic response in an Al-8%Mg-1%Li-0.2% Zr alloy was studied. A thermomechanical process (TMP) was used that involved warm rolling with controlled reheating between rolling passes. During the TMP, microstructural evolution was …
-
A Study of the Volatile Matter of Coal as a Function of the Heating Rate
… of volatile matter yields as a function of the heating rate was conducted. A suite of 21 coal and coke samples varying in rank from anthracitic to lignitic and heating rates from 10°C/min to about 450°C/min were used in the study. Heating rates up to 60°C per minute, which are typically used in …
-
Laminar and turbulent convective heat transfer over bodies at an angle of attack
… favorably with experimental data. The turbulent heating rates yielded results close to those of Vaglio-Laurin's method. It was found that the surface pressure distribution affected laminar heating rates more than the inviscid streamline geometry. The choice of reference conditions and the …
-
Investigation of Volatile Products from Wood Pyrolysis
… The objectives are to evaluate the influence of heating rates on pyrolysis products obtained from wood pyrolysis and to evaluate the influence of acid pre-treatment on pyrolysis products. Depending on the wood heating rates, pyrolysis can be categorized as Flash pyrolysis, Fast pyrolysis, and …
-
Ignition of coal and char particles: Effects of pore structure and process conditions
… reactor was also used for our studies to achieve heating rates as high as 1000$\sp\circ$C/sec. We found that chars prepared at higher pyrolysis heating rates ignited more frequently and exhibited higher reactivity when combusted at temperatures leading to diffusional limitations. Due to inherent …
-
Stereological Analysis of the Macropore Structure of Chars Produced Under Various Pyrolysis Conditions and the Influence of Macropore Structure on Char Gasification Rates in the Presence of Strong Diffusional Limitations
The effects of pyrolysis heating rates, particle size and ash upon the macropore structure of coal-derived chars were investigated for an Illinois #6 and a lignite coal. A new direct method was used to characterize the macropore structure of the chars. Polished cross-sections of char particles were …
-
Experiment and modeling : ignition of aluminum particles with a CO2 laser
… characterized by thermal analysis, where the heating rates are very low, on the order of 1 -50 K/min. The extrapolation of the identified kinetics to the high heating rates is difficult and requires direct experimental verification. This difficulty led to development of new experimental …
-
Processing parameters and kinetics of phosphate-based dechlorination for electrorefiner salt waste
Pyroprocessing generates a salt waste stream of fission products dissolved in alkali chloride salts. Iron phosphate (FePs) glasses have been identified as candidate materials due to the high waste loading, good chemical durability, and lower processing temperatures. Phosphate-based dechlorination …
Page 1 of 24