Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"heating surfaces"”.

  1. The use of silicone resins as non-wetting files on heating surfaces

    … mild steel tubes, 12 B.W.G., having an effective heating area of 1.113 ft.<sup>2</sup>. The operating conditions for the test were steam, 85% quality, at 45.75-46.25” Hg. abs. and body pressure of 7.8-8.5” Hg. abs. giving an effective temperature drop of 80-85°F. Evaporator feed for the “Normal …

    vt Repository record for The use of silicone resins as non-wetting files on heating surfaces (opens in a new tab)

  2. Experimental study on subcooled flow boiling on heating surfaces with different thermal conductivities

    … flow boiling on copper and stainless steel heating surfaces was experimentally investigated from both macroscopic and microscopic points of view. Flow boiling heat flux and heat transfer coefficient were experimentally measured on both surfaces under different conditions, such as pressure, …

    uiuc Repository record for Experimental study on subcooled flow boiling on heating surfaces with different thermal conductivities (opens in a new tab)

  3. Surface roughness effects on nucleate boiling heat transfer rates

    … flat, stainless steel (Type 304) plate. The heating surfaces were prepared with different degrees of roughness by common machining operations. Heat was supplied to the specimen by a nichrome wire heating coil mounted in a Lavite block which supported the specimen.

    nps Repository record for Surface roughness effects on nucleate boiling heat transfer rates (opens in a new tab)

  4. An Experimental Investigation of Critical Heat Flux Performance of Hypervapotron in Subcooled Boiling

    … heat flux on both plain and hypervapotron surfaces. It was developed on observations of bubble formation, departure and coalescence, and on the confirmation of nucleation structure on the heating surface. Finally, a numerical code was successfully developed to give CHF predictions for …

    uiuc Repository record for An Experimental Investigation of Critical Heat Flux Performance of Hypervapotron in Subcooled Boiling (opens in a new tab)

  5. A study of the nucleate boiling heat transfer coefficient of dichlorodifluoremethane (Freon-12) over a horizontal surface

    … between 6,000 and 63,000 Btu/hr-ft². The heating surfaces were finished with 400-A emery paper in two different patterns before each series of test-runs, while the geometric arrangement and the other parameters of the apparatus remained unchanged. Profilometer measurements of roughness and …

    ubc Repository record for A study of the nucleate boiling heat transfer coefficient of dichlorodifluoremethane (Freon-12) over a horizontal surface (opens in a new tab) Download PDF for A study of the nucleate boiling heat transfer coefficient of dichlorodifluoremethane (Freon-12) over a horizontal surface (opens in a new tab)

  6. Effect of boiling on deposition of metallic colloids

    … between heterogeneous nucleate boiling surfaces and deposition of suspended metallic colloidal particles, popularly known as crud or corrosion products in process industries, on those heterogeneous sites is investigated. Various researchers have reported that hematite is a major …

    uiuc Repository record for Effect of boiling on deposition of metallic colloids (opens in a new tab)

  7. Experimental studies of nucleate pool boiling from artificial active sites

    … than those generated from stainless steel heating surfaces. The liquid flow around a detaching bubble assumed two modes. Axially symmetric pulsating flow and flow by continuous rotation about an active site were recognized by their effects on bubble shape.

    rice Repository record for Experimental studies of nucleate pool boiling from artificial active sites (opens in a new tab)

  8. An experimental study of critical heat flux with surface modification and its analytic prediction model development

    … and sometimes involves physical failure of the heating surface in heat flux-controlled systems. Understanding of CHF phenomena and reliable CHF prediction model development are necessary to design various heat transfer systems including nuclear fission reactors, fossil-fueled boilers, …

    uiuc Repository record for An experimental study of critical heat flux with surface modification and its analytic prediction model development (opens in a new tab)

  9. Liquid-solid contact phenomenon in film boiling of Leidenfrost drops

    … atmospheric pressure with four liquids on five heating surfaces at temperatures of up to 620°C. The drop sizes investigated ranged from 0.01 cc. to 10.0 cc. The liquids investigated were water, denatured ethanol, iso-propanol, and ethylene-chloride. The heating surfaces which were investigated …

    utk-theses Repository record for Liquid-solid contact phenomenon in film boiling of Leidenfrost drops (opens in a new tab)

  10. A method of obtaining arbitrary surface temperature distributions of flat plate for use in aerodynamic research

    … investigations have indicated that adequate heating of the forward ten to twenty per cent of an airfoil will prevent ice formation on the entire airfoil. The boundary-layer characteristics of an airfoil immersed in a moving fluid are a region of laminar flow, a region of transition from …

    alabama Repository record for A method of obtaining arbitrary surface temperature distributions of flat plate for use in aerodynamic research (opens in a new tab)

  11. Modelling of Black Liquor Evaporator Cleaning - A case study of Skärblacka pulp mill

    … removal of sodium scales attached to the heating surfaces in the black liquor evaporators is necessary. Increased knowledge about the cleaning process for the scales can lead to overall improved performance for the mill, with reduced production losses and increased heat economy as main …

    chalmers Repository record for Modelling of Black Liquor Evaporator Cleaning - A case study of Skärblacka pulp mill (opens in a new tab)

  12. Effect of homogenisation on milk fouling in a tubular heat exchanger : a thesis presented in partial fulfilment for the requirements for the degree of Master of Food Engineering, Massey University, Palmerston North, New Zealand

    Fouling of equipment surfaces in milk processing has been a costly problem for many years. In spite of an increasing body of knowledge of the fouling mechanism, the problem is not fully understood yet. Recent investigations suggest that the role of fat in whole milk fouling seems to be very …

    massey Repository record for Effect of homogenisation on milk fouling in a tubular heat exchanger : a thesis presented in partial fulfilment for the requirements for the degree of Master of Food Engineering, Massey University, Palmerston North, New Zealand (opens in a new tab)

  13. Η επίδραση της τοπικής υπερθερμίας και της γενικής χημειοθεραπείας επί του υγιούς ηπατικού κυττάρου επίμυος: πειραματική εργασία

    … 15-30 min. though an air cooled unit capable of heating surfaces of dimension 5,5 x 9,3 cm. During the experiment we measured the changes in the temperature of the hepatic parenchyma of the animals and monitored the hematological and biochemical parameters according to the protocol as well as the …

    greece Repository record for Η επίδραση της τοπικής υπερθερμίας και της γενικής χημειοθεραπείας επί του υγιούς ηπατικού κυττάρου επίμυος: πειραματική εργασία (opens in a new tab)

  14. Undersökning av förstärkt värmetransport i fallfilmsindunstare

    … project was to examine what effect structured heating surfaces have on the mass and heat transfer properties of falling film evaporation. Based on a literature study, some alternative surface structures that could be of interest for falling film evaporation of black liquor were selected for …

    chalmers Repository record for Undersökning av förstärkt värmetransport i fallfilmsindunstare (opens in a new tab)

  15. Scale prevention in sea water evaporators. Part III. Decarbonation, filtration, and acidification

    … of these is the formation of scale on the heating surfaces of the distillation equipment. These scale deposits are caused by the precipitation of the solid matter in the sea water during the distillation process. As a result of the scale, the efficiency of the equipment is reduced and the …

    vt Repository record for Scale prevention in sea water evaporators. Part III. Decarbonation, filtration, and acidification (opens in a new tab)

  16. Διερεύνηση ενεργειακών και περιβαλλοντικών επιπτώσεων από τη χρήση αντλιών θερμότητας αέρα-νερού σε συστήματα θέρμανσης

    … - such as air, water, or ground - to provide heating, cooling, and domestic hot water with no harmful emissions given off locally. Moreover, with the decarbonization of the electricity sector, HPs in combination with thermal storage in heating and cooling systems, may help to balance the …

    greece Repository record for Διερεύνηση ενεργειακών και περιβαλλοντικών επιπτώσεων από τη χρήση αντλιών θερμότητας αέρα-νερού σε συστήματα θέρμανσης (opens in a new tab)

  17. Numerical investigation on heat transfer performance enhancement of binary PCM slurry flow boiling process in microchannels

    … mainly depends on the vapor coverage rate on the surfaces, referred to as the vapor fraction on surfaces, during the multiphase flow heat transfer process. The analysis indicates that the attachment of some large-size bubbles to the heating surfaces not only reduces the bubble generation rate on …

    birmingham Download PDF for Numerical investigation on heat transfer performance enhancement of binary PCM slurry flow boiling process in microchannels (opens in a new tab)

  18. Dynamika otopných ploch

    Diplomová práca je zameraná na výskum dynamiky tepelného chovania vybraných vykurovacích plôch teplovodného systému vykurovania. Cieľom práce je stanoviť dynamiku náhrevu a chladnutia a stanoviť vplyv týchto charakteristík na výslednú energetickú náročnosť zvolenej miestnosti. Projektová časť sa …

    brno-tech Repository record for Dynamika otopných ploch (opens in a new tab)

  19. Development of a standard for thermal energy and smart heat metering applications

    … and multi-purpose buildings with central heating systems, based on the accurate measurement of the actual individual thermal energy consumptions, represents an effective tool to promote energy saving and improve energy efficiency, as declared by the European Directive 2012/27/EU, recently …

    poli-torino Repository record for Development of a standard for thermal energy and smart heat metering applications (opens in a new tab)

  20. Development of Scalable and Tunable Super- Hydrophilic and - Hydrophobic Coatings on the CU Substrate for Phase Change Heat Transfer Applications

    … for practical applications, developing practical heating surfaces with high wettability and for the long-term use against organic contamination is a critical issue. Therefore, it is crucial to develop robust superhydrophilic surfaces with excellent mechanical and chemical stability for long-term …

    south-carolina Repository record for Development of Scalable and Tunable Super- Hydrophilic and - Hydrophobic Coatings on the CU Substrate for Phase Change Heat Transfer Applications (opens in a new tab)

Page 1 of 2