Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"heterogeneous microstructure"”.

  1. Additive Manufacturing of Ceramics with Multiscale Heterogeneous Microstructure

    … possibility of fabricating ceramic parts with heterogeneous microstructure on the multiscale, which cannot be achieved using the traditional methods. In today’s AM technologies, ceramics are often extruded for form a green body and then fired to a high density. However, two challenges are faced …

    clemson Repository record for Additive Manufacturing of Ceramics with Multiscale Heterogeneous Microstructure (opens in a new tab)

  2. Crystal Plasticity Modeling of Heterogeneous Microstructure in Alloys

    Heterogeneous microstructures, comprising grains, dislocation cells, precipitates, and solute atoms, typically govern the macroscopic mechanical properties of engineering alloys. In recent years, the design, fabrication, and optimization of these heterogeneous microstructures have been extensively …

    gatech Repository record for Crystal Plasticity Modeling of Heterogeneous Microstructure in Alloys (opens in a new tab)

  3. Crystal Plasticity Modeling of Heterogeneous Microstructure of Additively Manufactured Metals

    … density lower than the cell wall which makes the microstructure heterogeneous. Heterogeneous microstructures can be both beneficial for increasing the strength and have a detrimental effect to the ductility. Therefore, a nonlocal crystal plasticity finite element method (CPFEM) is employed as a …

    south-carolina Repository record for Crystal Plasticity Modeling of Heterogeneous Microstructure of Additively Manufactured Metals (opens in a new tab)

  4. High-throughput Exploration of Glass Formation via Laser Deposition and the Study of Heterogeneous Microstructure in a Bulk Metallic Glass Alloy

    … ambiguous. To further the present knowledge, the heterogeneous microstructure of a zirconium-based bulk metallic glass was investigated with instrumented nanoindentation and dynamic modulus mapping. Significant spatial variations in the mechanical properties measured by both techniques suggests a …

    wustl Repository record for High-throughput Exploration of Glass Formation via Laser Deposition and the Study of Heterogeneous Microstructure in a Bulk Metallic Glass Alloy (opens in a new tab)

  5. A Multiscale Framework for Predicting the Performance of Fiber/Matrix Composites

    … free-edge problem was revisited with the heterogeneous microstructure directly modeled, which showed that the local heterogeneity greatly affects the predicted stresses along the ply interface. Accounting for the microscale heterogeneity removed the singularity at the ply interface and …

    tamu Repository record for A Multiscale Framework for Predicting the Performance of Fiber/Matrix Composites (opens in a new tab)

  6. Microstructural engineering for enhanced fatigue performance using laser powder bed fusion.

    … Fatigue performance can be enhanced by spatial heterogeneous microstructure by improving the resistance of crack growth rate due to the yield stress gradient effect. In this thesis, two strategies (varying rescanning parameters and varying material compositions) were applied to fabricate spatial …

    soton Download PDF for Microstructural engineering for enhanced fatigue performance using laser powder bed fusion. (opens in a new tab)

  7. Structure-property linkages for polycrystalline materials using materials knowledge systems

    … that are capable of rapidly exploring candidate microstructures and their associated properties are required to accelerate the rate of development and deployment of novel materials. In this work, a suite of computationally efficient protocols, based on the materials knowledge system (MKS) …

    gatech Repository record for Structure-property linkages for polycrystalline materials using materials knowledge systems (opens in a new tab)

  8. Deep material networks for lead-free solder alloys

    … decomposition. The DMN method homog enizes a heterogeneous microstructure for multiscale simulation purposes. Five microstruc tures from the phase-field simulations were generated, and for each micro structure a data set describing the homogenized elastic parameters was calculated. The data …

    chalmers Repository record for Deep material networks for lead-free solder alloys (opens in a new tab)

  9. Thermomechanical modeling of porous ceramic-metal composites accounting for the stochastic nature of their microstructure

    … viewed as three-phase composites with a random heterogeneous microstructure. While random in nature, the effective properties and overall behavior of such composites can still be linked to specific stochastic functions that describe the microstructure. The main objective of this research was to …

    gatech Repository record for Thermomechanical modeling of porous ceramic-metal composites accounting for the stochastic nature of their microstructure (opens in a new tab)

  10. Gas sensors based on ceramic p-n heterocontacts

    … and sensor response through conductivity and heterogeneous microstructure were studied using dc current-voltage, dc current-time, and impedance spectroscopy measurements. Through analysis of the time dependent current data, it was shown that the sensor response of the heterocontact can be …

    iastate Repository record for Gas sensors based on ceramic p-n heterocontacts (opens in a new tab)

  11. Towards the optimization of fatigue behaviour of 3D-printed titanium structures

    … inaccuracy, porosity, residual stresses, and heterogeneous microstructure are often induced by the AM processes but their influence on the fatigue behaviour of architected materials is still largely in debate. This research address these issues from a fundamental level via a combination of …

    oxford Repository record for Towards the optimization of fatigue behaviour of 3D-printed titanium structures (opens in a new tab)

  12. Modelling Thermal Conductivity of Porous Thermal Barrier Coatings for High-Temperature Aero Engines

    … coat, and the super-alloy substrate. The highly heterogeneous microstructure of the TBC consists of defects such as pores, voids, and cracks of different sizes, which determine the coating’s final thermal and mechanical properties. The service lives of the coatings are dependent on these …

    ottawa-retro Repository record for Modelling Thermal Conductivity of Porous Thermal Barrier Coatings for High-Temperature Aero Engines (opens in a new tab)

  13. Computational Modeling of Wave Propagation in Heterogeneous Microstructures Using Discrete and Continuum Frameworks

    … with novel properties. These materials are often heterogeneous composites---with complex microstructures influencing their overall structural behavior. Though non-destructive evaluation using wave propagation can offer the mechanical properties of the composite, experimental methods to gain …

    houston Repository record for Computational Modeling of Wave Propagation in Heterogeneous Microstructures Using Discrete and Continuum Frameworks (opens in a new tab)

  14. Defect characterization in heterogeneous civil materials using ultrasound

    … . Concrete naturally exhibits large scale heterogeneous microstructure with a great deal of local material property variability, For this reasons, many conventional NDE techniques that work well for steel and other homogeneous materials cannot be applied to concrete; concrete is unable to …

    gatech Repository record for Defect characterization in heterogeneous civil materials using ultrasound (opens in a new tab)

  15. Stochastic Microstructure Functions: Statistically Conditioned Microstructure Generation, Big Datasets, and Quantification

    … and theoretical analysis of the Stochastic Microstructure Function (SMF) formalism – a leading statistical formalism for the study of materials – that culminates in an overarching framework for the curation of large heterogeneous microstructure datasets. I touch on three topics relating to …

    gatech Repository record for Stochastic Microstructure Functions: Statistically Conditioned Microstructure Generation, Big Datasets, and Quantification (opens in a new tab)

  16. Karakterisering av additivt tillverkat martensitiskt rostfritt stål

    … the manufacturing process, heat treatment, microstructure and mechanical properties still requires further understanding. In this report, MBJ-manufactured martensitic stainless steel was investigated with the aim of characterizing the microstructure after different heat treatment cycles and …

    chalmers Repository record for Karakterisering av additivt tillverkat martensitiskt rostfritt stål (opens in a new tab)

  17. Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels

    … In addition, the effect of compact density and microstructures of materials on the resistance to contact damage mechanisms was investigated. Density and microstructure were modified by varying green density, alloying elements, sintering temperature and time, and applying strengthening …

    trento Repository record for Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels (opens in a new tab)

  18. Microstructure Control and Correlation to Creep Properties in Grade 91 Steel Weldment After Thermo-Mechanical Treatments and an Fe-30Cr-3Al Alloy Strengthened by Fe2Nb Laves Phase

    … discussed. The first method alters the initial microstructure of typical Grade 91 steel base metal before welding, while the second provides baseline microstructure characteristics and creep performance of a new alloy that is strengthened by the intermetallic Fe2Nb Laves phase. The initial …

    utk-theses Repository record for Microstructure Control and Correlation to Creep Properties in Grade 91 Steel Weldment After Thermo-Mechanical Treatments and an Fe-30Cr-3Al Alloy Strengthened by Fe2Nb Laves Phase (opens in a new tab)

  19. Evaluation of an Additively Manufactured Ferritic-Martensitic Steel for Advanced Nuclear Applications

    … ferritic alloys that require carefully tailored microstructures. Laser-based AM produces heating patterns that interfere with the phase transformations from which wrought FM steels derive their ductility, high strength, and creep resistance. Additionally, study of irradiation effects on AM …

    maryland Repository record for Evaluation of an Additively Manufactured Ferritic-Martensitic Steel for Advanced Nuclear Applications (opens in a new tab)

  20. Assessment of the mechanical microstructure of masonry clay brick by nanoindentation

    … is focused on the detailed description of the heterogeneous microstructure of the fired clay brick, as a function of its composition and processing conditions. Multi-field methods of investigation have been combined, from standard mechanical tests carried out on bulk material on the macro-scale …

    minho-thes Repository record for Assessment of the mechanical microstructure of masonry clay brick by nanoindentation (opens in a new tab)

Page 1 of 2