Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 36 for “"high solids content"”.
-
Pushing the Boundaries of Concentrated Dispersions, High Solids Content Bimodal Latex for Paper Coating Applications
… for the production of polymeric dispersions with high solids content and low viscosity were developed, investigated and characterized. The specifications required for the desired application of paper coating, which constitutes one of the major innovative aspects of this thesis, requires in average …
-
Aggregation and Redispersion of Switchable Latexes
… can then be destabilized by the removal of CO2. High Tg polymers have been successfully redispersed, as shown by recovery of primary particle size (measured by light scattering methods), but an input of energy was required. Sonication was the first method used, but lower-energy methods such as …
-
In-Plant Testing of the Hydrofloat Separator for Coarse Phospahte Recovery
… the hydrophilic particles are rejected as a high solids content (65-70%) underflow. The fluidized bed acts as a "resistant" layer through which no bubble/particle aggregates can penetrate. As a result, the HydroFloat also acts as a density separator that is capable of treating much coarser …
-
High Volume Fraction Polymer Nanoparticles as Inkjet Ink Model Suspensions: from Synthesis to Rheological and Printing Characterisation
… of colloidal dispersions, particularly when the solids content within the ink is increased, a highly desirable and cost-saving trait for industrial applications. More specifically, this applies to the speed and material diversity which can be attained, compared to conventional printing methods. …
-
Wastewater Surveillance of SARS-CoV-2 at a Canadian University Campus and the Impact of Wastewater Characteristics on Viral RNA Detection.
… the centrifugation method for wastewater with high solids content and with the ultrafiltration method for low solids content. Wastewater characteristics from the building sewers were more variable than overall campus wastewater. Statistical analysis was performed to manifest the observations. …
-
Enhancing hydraulic performance of a multi-stage anaerobic digester for high solids cattle manure
… many economic challenges when being applied to high solids substrate such as dry-lot cattle manure. In Colorado and the rest of the arid west, feedlot practices and dry climate combine to form a waste product that is very high in total solids (TS) content, from 50% up to 90% TS. Since the most …
-
Fundamentals of Operation of the Induced Bed Reactor (IBR) Anaerobic Digester
… was developed at Utah State University to apply high-rate anaerobic digestion techniques to high solids content substrates. This technology has been successfully implemented at full-scale multiple installations in the United States and Canada as a waste treatment and energy production technology, …
-
Chemical Engineering Approaches to the Fabrication of Uniform Polymeric Particles and Structures
… was conducted in the first stage at a higher agitation speed, followed by polymerisation at reduced stirring speed. The proposed policy led to the formation of more uniform particles, depending on the stabiliser concentration, than those obtained from the one-stage conventional …
-
Assessing strategies to increase efficiency of renewable gas production from feedlot collected manure
… reactor with liquid extraction to maintain higher solids. The extracted liquid is assessed for potential digestion in a high-rate fixed film reactor. The integrated system evaluated is called High-Rate Hybrid Continuously Stirred AD Reactor (CSTR). This study aims to evaluate the performance …
-
Chemical thermoplasticization of lignocellulosic fibers by reactive extrusion
… to petroleum-based thermoplastics, but their high manufacturing costs have limited wide-spread application. The primary objectives of this thesis were to use low-cost lignocellulose, practically forestry waste, as the raw material rather than more expensive purified cellulose in the …
-
Investigations of biphasic seeded emulsion polymerizations in a continuous tubular reactor
… had been successful in producing low solids contents material, it failed at producing industrial-grade latex (>30 w%) due to the accumulation of solids (fouling) against the reactor’s inside wall that ultimately caused the clogging and total failure of the reactor. Therefore, there was …
-
Design, Testing and Evaluation of an Air Injection Grouting System for Geothermal Bores
… a constant rate was found to produce a uniform, high solids content grout. A relationship between mass flow rate and the percent solids of the resulting grout was discovered in tests with drilling mud as an annular fluid. The mass flow rate and percent solids relationship for tests in water was …
-
In Situ Consolidation of Tailings Muds
… are too costly or unable to handle the high solids content of the waste. The aim of the research documented here was to develop a new in-situ process for treating tailings that would cut costs by eliminating the need for tailings transport and re-deposition. The proof of concept of the …
-
Percent solids and other characteristics of progency resulting from interspecific trisomic onion backcrosses
… and cytological studies were conducted. Percent solids was determined. Data obtained under field conditions failed to distinguish trisomic from diploid plants. The trisomic backcross populations had higher mean solids content than ev. Temprana' and lower than 'Delta Giant'. Solids from 5.2 to …
-
EFFECTIVENESS ASSESSMENT OF FNA IN IMPROVING SOLUBILIZATION AND CONTROLLING PROBLEMATIC MICROORGANISMS IN PRE-TREATMENT OF FOOD WASTE
… study at pH ranging from 3-5.5, and volatile solids (VS) content of 16.8-135 g/L. Solubilization of organic material, inhibition of N-related biological processes, and control of problematic microorganisms, including sulfate-reducing bacteria (SRB) and pathogenic bacteria, were compared with …
-
Rheology of Filled and Unfilled Polyurethanes for Reactive Extrusion-Based Applications
… material extrusion (MatEx) of thermoplastic or high viscosity composite materials. Because of its ability to reduce material waste while printing complex geometries, AM has the potential to revolutionize the manufacturing industry for a diverse set of materials and products. MatEx of …
-
Synthesis of biobased silver nano-inks for 3D printed electronics
… technique for producing microscale features with high precision. EHD also presents significant promise for use in microgravity, allowing for the on-demand fabrication of devices in outer-space missions. However, the selection of suitable inks remains a major challenge due to limited availability …
-
Microwave enhanced advanced oxidation treatment of organic slurries
… and secondary sludge. Secondary sludge showed higher treatment efficiency than primary or mixed sludge. This study explored the impact of solids concentrations on the sludge treatment efficiency. Treatment of sludge with high solids content would allow to handle larger amounts of sludge at a …
-
Development of an Organic Processor Assembly (OPA) for Sustainable Resource Recovery to Enable Long-Duration, Deep-Space Human Exploration (LoDDSHE)
… water and food production. However, these high-strength waste streams are difficult to treat due to factors such as heterogeneity, complexity, high solids content, and presence of pathogens. Currently, there are no flight-ready technologies capable of treating mixed organic wastes, …
-
Advanced Structures and Compositions for 3D Forming of Cellulosic Fibers
… treatment of fibers in aqueous dispersions of high- and low-solids content, (b) in-plane compression of paper webs followed by unrestrained drying and (c) chemical modification of fiber joints by protein spraying. The mechanical treatment of fiber suspensions at elevated temperature and high …
Page 1 of 2