Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"high step-up"”.

  1. High Step-Up/Down Transformerless Multilevel Converter for Renewable Energy Applications

    This thesis focuses on a high step-up/down transformerless dc-dc modular multilevel converter (MMC) that would be applicable to dc power systems. The design achieves high voltage ratios for interfacing renewable energy sources such as photovoltaic and line interactive Uninterruptible Power System …

    arkansas Repository record for High Step-Up/Down Transformerless Multilevel Converter for Renewable Energy Applications (opens in a new tab)

  2. High step up DC-DC converter topology for PV systems and electric vehicles

    This thesis presents new high step-up DC-DC converters for photovoltaic and electric vehicle applications. An asymmetric flyback-forward DC-DC converter is proposed for the PV system controlled by the MPPT algorithm. The second converter is a modular switched-capacitor DC-DC converter, it has the …

    aston Download PDF for High step up DC-DC converter topology for PV systems and electric vehicles (opens in a new tab)

  3. Advanced topologies of high step-up DC-DC converters for renewable energy applications

    … on developing several advanced topologies of high step-up DC-DC converters to connect low-voltage renewable energy (RE) sources, such as photovoltaic (PV) panels and fuel cells (FCs), into a high-voltage DC bus in renewable energy applications. The proposed converters are based on the …

    must-thes Repository record for Advanced topologies of high step-up DC-DC converters for renewable energy applications (opens in a new tab)

  4. A High Power, High Step-up DC/DC Converter for Fuel Cell Range Extender Vehicles

    … electric vehicles, such as range anxiety, high cost due to large batteries, and long charging times, and the inconvenience of using fuel cell hybrid vehicles due to the impossibility of charging at home, fuel cell range-extender vehicles (FCREVs) have been proposed since they exhibit some …

    mcmaster Repository record for A High Power, High Step-up DC/DC Converter for Fuel Cell Range Extender Vehicles (opens in a new tab)

  5. Design and development of high step-up single-switch DC/DC converters for micro-inverter applications

    … Hence, these sources require efficient high-step-up DC–DC converters to interface low-voltage inputs with high-voltage DC buses. However, traditional converters such as boost and buck-boost require extreme duty cycles to achieve high voltage gains. For instance, achieving a gain ratio of …

    qu-belfast Repository record for Design and development of high step-up single-switch DC/DC converters for micro-inverter applications (opens in a new tab) Embargoed until 2028-07-31

  6. Design, Simulation and Implementation of a High Step-up Z-source DC-DC Converter with Flyback and Voltage Multiplier

    … Since the output voltage of PV cells is low, a high step-up dc-dc converter is needed to increase this low voltage to meet inverter input required voltage. In this thesis, a novel high step-up dc-dc converter (which is the derivation of z-source converter) is introduced. This converter has a …

    tamu Repository record for Design, Simulation and Implementation of a High Step-up Z-source DC-DC Converter with Flyback and Voltage Multiplier (opens in a new tab)

  7. High-gain isolated DC-DC converter topologies for renewable energy microinverter applications

    … sources inherently provide low output voltage, high step-up DC/DC converters are required to interface them with high-voltage DC buses used in renewable-energy systems, DC microgrids, and electrified transport platforms. In recent converter development, increasing emphasis has been placed on …

    qu-belfast Repository record for High-gain isolated DC-DC converter topologies for renewable energy microinverter applications (opens in a new tab) Embargoed until 2028-07-31

  8. Design and development of a high-gain power converter based on active-switched inductor-capacitor and voltage multiplier

    … require DC-bus voltages that are significantly higher and more stable than those produced by photovoltaic, fuel-cell, and battery-based energy systems. High-step-up DC-DC converters are needed to interface low-voltage sources with inverters. Nevertheless, conventional high-gain converters often …

    qu-belfast Repository record for Design and development of a high-gain power converter based on active-switched inductor-capacitor and voltage multiplier (opens in a new tab) Embargoed until 2028-12-31

  9. Power Electronic Architectures for Solar-Charged Electric Vehicles

    … is that the PV voltage is often low, and thus a high voltage gain is required to step up this voltage to that of the high- voltage EV traction battery. The first contribution of this thesis the proposal of a high step-up DC-DC converter with low input voltage ripple. This feature is important …

    mcmaster Repository record for Power Electronic Architectures for Solar-Charged Electric Vehicles (opens in a new tab)

  10. Performance Improvement of Power Conversion by Utilizing Coupled Inductors

    … application issues of advanced topologies with coupled inductors. The proposed innovative solutions can achieve significant performance improvement compared to the state-of-the-art technology. New applications call for high-efficiency high step-up DC-DC converters. The basic topologies suffer from …

    vt Repository record for Performance Improvement of Power Conversion by Utilizing Coupled Inductors (opens in a new tab)

  11. Novel Current-Fed Boundary-Mode Parallel-Resonant Push-Pull Converter

    The inherent difficulty in designing high voltage power supplies is often compounded by demands of high reliability, high performance, and safe functionality. A proposed high step-up ratio DC-DC converter meets the exacting requirements of applications such as uninterruptible power systems, radar, …

    calpoly Repository record for Novel Current-Fed Boundary-Mode Parallel-Resonant Push-Pull Converter (opens in a new tab)

  12. Pulsed power conditioning with strongly coupled transformers

    Power conditioning systems which transform high current, low voltage sources to high voltage, low current sources with minimal losses are useful in pulsed power applications. The use of strongly coupled transformers with a high step-up ratio can facilitate this transformation. This research …

    ttu Repository record for Pulsed power conditioning with strongly coupled transformers (opens in a new tab)

  13. New Topologies for High Voltage Gain DC-DC Power Electronic Converters – Theoretical Analysis and Experimental Validation

    … is focused on developing and analyzing new high voltage gain DC-DC power electronic converters. The proposed converters in this dissertation are suitable candidates for connecting low voltage sources such as photovoltaic (PV) panels or fuel cell (FC) stacks to a DC microgrid or DC link of an …

    must-thes Repository record for New Topologies for High Voltage Gain DC-DC Power Electronic Converters – Theoretical Analysis and Experimental Validation (opens in a new tab)

  14. Design, Implementation, Control and Performance Analysis of Coupled Inductor Ćuk Converter

    … currents and compact system design along with a high step-up ratio. Ćuk converter is a variant of the standard buck-boost converter. It is a great choice for integrating renewable energy sources due to its wide operating range and unique quality of continuous current flow at both the terminals. …

    umn Repository record for Design, Implementation, Control and Performance Analysis of Coupled Inductor Ćuk Converter (opens in a new tab)

  15. Topological Modifications of Dual Active Bridge DC-DC Converter for Renewable Energy Systems

    … storage systems has intensified the demand for high-efficiency DC–DC converters. Dual-active-bridge converters are widely used due to their bidirectional power flow, galvanic isolation, and soft-switching capability; however, conventional DAB topologies suffer from limited performance under wide …

    queens Repository record for Topological Modifications of Dual Active Bridge DC-DC Converter for Renewable Energy Systems (opens in a new tab)

  16. Small Signal Analysis and Control of Snubberless Naturally-Clamped Soft Switching Current-Fed PWM DC/DC Converters

    … prominent enabling technologies for the uninterruptible power supply (UPS), renewable energy sources, fuel cells, energy storage, electric transportation, electrical appliances and industrial processes. Owing to the challenges to safety, high step-up ratio, galvanic isolation, high-frequency (HF) …

    concordia Download PDF for Small Signal Analysis and Control of Snubberless Naturally-Clamped Soft Switching Current-Fed PWM DC/DC Converters (opens in a new tab)

  17. Implementation Of Ćuk Converter With Integrated Magnetics For Residential Solar Applications

    … currents and compact system design along with a high step-up ratio. The Ćuk converter is an ideal choice for such applications due to its unique quality of continuous current flow at both the terminals and the wide operating range. This reduces the noise, need for filtering, and electromagnetic …

    umn Repository record for Implementation Of Ćuk Converter With Integrated Magnetics For Residential Solar Applications (opens in a new tab)

  18. Characterization, Analysis, and Application of WBG Power Devices for Future Power Conversion Systems

    … converter system. Fast switching, compactness, high performance and efficiency, and high temperature operation are the exacting challenges experienced by conventional silicon (Si) power device based power converters in many applications. In this dissertation, the wide bandgap (WBG) power devices …

    denver Repository record for Characterization, Analysis, and Application of WBG Power Devices for Future Power Conversion Systems (opens in a new tab)

  19. Multi-Port DC-DC Converters for Renewable Energy Systems

    … safety. IMPCs are categorized into two major groups: fully isolated converters (FICs) and partially isolated converters (PICs). Each group is further divided into conventional half- and full-bridge converters. This review identifies the limitations and recommends future research directions for …

    sask Repository record for Multi-Port DC-DC Converters for Renewable Energy Systems (opens in a new tab)

Page 1 of 2