Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"high temperature forming"”.
-
Physics-based material constitutive models for the simulation of high-temperature forming of magnesium alloy AZ31
… the low ductility of magnesium alloys at room temperature necessitates the use of high-temperature forming to manufacture complex components. Finite-element-method (FEM) simulations can assist in determining the optimum processing parameters for high-temperature forming, but only if an accurate …
-
Feasibility study of a hybrid process for improving cold incremental sheet forming of titanium alloy
Titanium is used for high value engineering components where high strength-to-weight ratio and corrosion resistance is a critical requirement. However, the production of complex components made from titanium alloys is limited due to their limited formability at low temperature, which necessitates …
-
Evaluation of nitrogen incorporation effects in HfO₂ gate dielectric for improved MOSFET performance
… excessive due to direct tunneling. Thus, high-k dielectric, which has a higher dielectric constant than SiO2, has been intensively studied for future I.C. application. Among various high-k dielectrics, HfO2 is considered to be the most promising candidate because it has a high dielectric …
-
Processing and reliability studies on hafnium oxide and hafnium silicate for the advanced gate dielectric application
… dielectric is facing serious challenges such as high leakage current, impurity diffusion, and dielectric thickness uniformity control across a 300 mm wafer. Consequently, high-k materials, which have higher dielectric constants (k) than SiO2, are expected to replace it as the gate insulator. …
-
The role of fast ions in stabilising the ion temperature gradient mode
… a clean source of energy and satisfying the high electricity demands of the future. The fuel in a typical reac- tor is heated to a very high temperature forming a gas of charged particles known as a plasma. The fusion reactions in the tokamak have to reach a self-sustaining regime to minimise …
-
A study of the forming limits of cold and hot forming of aluminium alloy sheets with multi-point tooling
Multi-point forming (MPF) is a special category of sheet metal forming techniques with good operational flexibilities due to using two sets of adjustable pins along the machine ram direction. These pins represent the acting points of the desired forming-tool surface contours. Although this …
-
Constitutive and Friction Characterization and Simulation of AA7075 Aluminum Alloy Sheet under Die Quenching Conditions
This thesis investigates the die quench forming of AA7075 aluminum alloy sheet, including the constitutive and friction behaviour at elevated temperatures. Experiments examining characterization of friction behaviour and models to simulate sheet forming were developed for conditions corresponding …
-
A study on the material and device characteristics of hafnium oxynitride MOSFETs with TaN gate electrodes
… In addition, HfO2 crystallizes at relatively low temperature (<600 oC) unlike SiO2 that remains in amorphous phase through the semiconductor process involving high temperature annealing higher than 1000 oC. In this research, the focus was placed on the effects of nitrogen in HfO2 dielectrics to …
-
Modelling Microstructure-Property Relationships in Polycrystalline Metals using New Fast Fourier Transform-Based Crystal Plasticity Frameworks
… a new full-field framework for generating forming limit diagrams (FLDs) of aluminum sheet alloys, e.g., AA3003 and AA5754. The new coupled framework is able to investigate the complex effects of grain morphology, local deformation, local texture and grain interactions on the predictions of …